English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
Hydro Dipping Machine - Semi-Automatic - YHT223AXF
Categories : Hydrographic / Water transfer Machines
Dipping Tank + Auto Film Layer + Auto Spray System Dipping Tank 3 meters length. A powerful combination of all necessary important processes for WTP processing. From the very beginning laying, and the following activator spraying to the final dipping stage, done the main WTP process with only one button. YHT-223A2XF This machine includes dipping tank, auto film layer and auto spray system. The combination of these 3 components not only makes WTP even simple, but more important– stable quality to the final product. This system can memorize multiple sets of different processes. YHT-223A2XF is perfect for large product and medium quantities of production/day
FILM/BAGS WASTE PLASTIC RECYCLING MACHINE: KCR-65
Categories : Recycling Lines by Application
The KCR-65 is a film/bag waste plastic recycling machine that crushes and reprocesses HDPE, LDPE, and LLDPE film or bags, converting the waste into pellets at an output of 35-50 kgs / hr.A 15 HP crusher and 2 HP spiral-type hopper feeding device convey the material into a single-degasification Ø 65 mm screw with a 24:1 L/D ratio, heated at 13.5 kw across 3 auto thermo zones and driven by an AC 20 hp inverter motor. The melt passes through a spaghetti-type die (3.5 kw heater, 1 zone) with a manual screen changer, then a water-cooling system and a pellet cutter with a 1 HP cutting machine motor and 3 HP cutter motor.Model: KCR-65Suitable material: HDPE/LDPE/LLDPEOutput: 35-50 kgs / hrCrusher: 15 HPScrew diameter: Ø 65 mm, L/D ratio 24:1Heating capacity: 13.5 kw, 3 zoneDriving motor: AC 20 hp + InverterDie type: Spaghetti TypeCooling system: Water Cooling
2-in-1 Conveying Dryer (CD)
Categories : Dryers and Dehumidifiers
Hopper dryer combine vacuum loader is perfect to move anywhere for your need. A stainless insulated hopper dryer with dual layer to help drying better and faster. Save more energy and increase higher efficiency. A vacuum loader automatically supplies dried resin to avoid the shortage of material during production. Installed pipe-clean device (Taiwan Pat:M299801) and closed-loop can prevent the moisture return, static electricity and resin pollution inside the pipe for better quality. Patented Heat-recycler (Taiwan Pat:226245;China Pat:01258213.1) can save your energy, increase drying and decrease the pollution of hot air and dust. Installed weekly timer and safety protectors can save your labor cost and protect operators in better working environment. Only one control unit is convenient for you to monitor all suction points. Able to extend suction points up to four as 1 to 4 small central conveying system to supply resin for raw material areas and numerous molding machines. Save your equipment cost and space without extra spend.
Twin Shaft Shredder (Kroko Twin Series)
Categories : Crushing, Shredding & Granulating Equipment
Intelligent control system The program system monitoring the shredding status and allows automatically reverse and forward motion to keep most stability while creating best production. High radial loads with high efficiency and great stability The professionally designed shaft and blades are made with high wear-resistant steel and processed by heat-treatment to increase the service life. It can withstand higher radial load and create higher efficiency while keep the best stability.
Twin Shaft Shredder
Categories : Crushing, Shredding & Granulating Equipment
Design especially for bulky plastic products. Eliminate the disadvantage of traditional high horse power crusher. Also for cracking unusual objects, waste tyres, logs, sleepers, etc. High capacity; low noise; installing easy replaced screen makes the desired output size available The knife is detachable, mutiple used and can minimise the wear and tear cost Easy operation Particle in uniform size Customized size is accepatable
SE series
Categories : TPE (Thermoplastic Elastomer)
Used for weather-resistant products such as ultra-soft transparent insoles, soda cap gaskets, bicycle grips, and snow boots; made of hydrogenated SEBS material.
Automatic Strand Pelletizing System
Categories : Pelletizing & Compounding Lines
Born For Extreme Automation The molten polymer been extruder from the die, fall into automatic water flow. High-pressure water flow from a special designed spray nozzle pulls the strands immediately while cooling at the same time. No more drawing strands before pelletizing. Minimize the lump waste during drawing the strands. GENIUS
Strand Pelletizing System
Categories : Pelletizing & Compounding Lines
Minimize The Powder Waste Suitable for higher MI or sticky materials. Production line is equipped with high-precision pellets cutter and specially designed vibrating screener.
3 IN 1 Two Stages Spaghetti Cutting Recycling & Pelletizing Machine
Categories : Pelletizing & Compounding Lines
High torsion, low-noise; temp. controls stability; double degassing, Suitable for a variety of raw materials, Easy to operate; prority transcends traditional model, Low labor cost, Optional equipment- crusher and mixer, enables every batch of material to mix well, Two stages filter makes material more clean
Force Feeding Single Stage Spaghetti Cutting Recycling & Pelletizing Machine
Categories : Pelletizing & Compounding Lines
High torsion, low-noice; temp. controls stability; double degassing, Suitable for a variety of raw materials, Easy to operate; prority transcends traditional model, Spaghetti cutting is suitable for high melting index plastic, Optional equipment- crusher and mixer, enables every batch of material to mix well, No noise during pellet cutting
WASTE PLASTIC RECLAMATION & PELLET REGENERATING MACHINE (SPAGHETTI TYPE)
Categories : Pelletizing & Compounding Lines
Available for dry and wet material, but you need to advise us in advance Simple operation & high capacity Application for PP, HDPE, LDPE, LLDPE, PS etc. Double extruder is used for better degasification Forced feeding for film We didn’t show all our models, please don’t hesitate to contact us for other size of recycling machines.
Solvent-less & Solvent-base Combi Laminating Machine(WDSL Series)
Categories : Industrial Lamination
For the solvent-free lamination, WORLDLY launches solvent-less & solvent-base combi laminating machine WDSL series. The unwinder and rewinder are adopted with a double shaft turret type with automatic splicing system, which can continue splicing without stopping the machine. This also greatly enhances the work efficiency. Moreover, the manipulation is much easier and simple with the PLC digital control system and touchable human-machine interface. Solvent-less & solvent-base combi laminating machine WDSL series is the leading popular machines for solvent-free. It has higher compound speed in order to increase productivity. And, there is no wasted costs caused by the solvent evaporation. Also, the coating thickness is very thin with 100% solid ingredient which can reduce a lot of cost. The production won't produce solvent evaporation and there is no solvent residue. It all conforms to food safety regulations. Meanwhile, there's no need for drying chamber which can save energy. The solvent-less & solvent-base combi laminating machine can be ordered from solvent-base lamination, solvent-less lamination, or solvent-base & solvent-less lamination which can accomplish three-layer lamination depends on the customer's need, and the machine itself can be shorten to save space for additional use which can make a significantly cost reduction.
Solvent-less Laminating Machine (WSL Series)
Categories : Industrial Lamination
For the solvent-free lamination, WORLDLY launches solvent-less laminating machine WSL series. The manipulation is much easier and simple with the PLC digital control system and touchable human-machine interface. Solvent-less laminating machine WSL series is the leading popular machines for solvent-free. It has higher compound speed in order to increase productivity. And, there is no wasted costs caused by the solvent evaporation. Also, the coating thickness is very thin with 100% solid ingredient which can reduce a lot of cost. The production won't produce solvent evaporation and there is no solvent residue. It all conforms to food safety regulations. Meanwhile, there's no need for drying chamber which can save energy. The machine itself can be shorten to save space for additional use which can make a significantly cost reduction.
Single Shaft Shredder (Kroko Series)
Categories : Crushing, Shredding & Granulating Equipment
Cost Effective Precision Installed with STM gearbox made from Italy. Ensure the best effective precision and the higher torque density. High radial loads with high efficiency and great stability Equipped with professionally designed shaft and blades, it can withstand higher radial load and create higher efficiency while keep the best stability. GENIUS
EX series
Categories : TPE (Thermoplastic Elastomer)
SEBS material, suitable for profile extrusion used in door and window weatherstrips, resistance bands, chest expanders, IC tubing, and other products.
Sleeve Rewinding and Inspection Machine (Reversible) - FSP-250-2
Categories : Slitters and Rewinders
The FSP-250-2 is an ideal re-reeling machine for round roll material inspecting process such as printing, surface or the seaming quality of shrink sleeves. 2 motors driven system and memorized reverse function allowed the winding direction changed during operation.
Sleeve Rewinding and Inspection Machine - Reversible Series-FSP 250-2
Categories : Slitters and Rewinders
The FSP-250-2 is an ideal re-reeling machine for round roll material inspecting process such as printing, surface or the seaming quality of shrink sleeves. 2 motors driven system and memorized reverse function allowed the winding direction changed during operation.
Screws and Barrels for Waste Plastic Recycling Pelletizing Machine
Categories : Screws and Barrels
● Wear-resistant,high mixer,production increased,life span extended ● Cautious process procedures ● Design of advanced extrusion by net pressure ● Design of advanced and high quality plasticization ● Screws are designed for the ratio and properties from different plastic material
Screws and Barrels for Profile Extruders
Categories : Screws and Barrels
＋Suitable for all kinds of PVC profile products. ＋High production & high mixing. ＋The bi-metallic screw is wear-resisting & long life span.
Force Feeding Two Stages Spaghetti Cutting Recycling & Pelletizing Machine
Categories : Pelletizing & Compounding Lines
Side feeding barrel is better for storage and steady material input at same time. Main Extruder can extrude the material whose moisture below 7%. Sub extruder conducts second time filtering and ventilating for dirtier materials. Die face cutting frame made in SUS304 to prevent the rust and corrosion. Knives adjustments automaticlly patent design.The knife and die plate always set at 90 degree. No need to adjust frequently. High speed dryer is soundproof with double layer sealing design. The underneath water tank can gather the waste water and filter the impurity. Water circulation pump collects the waste water and the water vapour from pelletization and high speed dryer. The triple layers vibrating screener is easy to clean, disassemble and assemble. Can customize the diameter of the hole. Blower with noiseless design. Big material storage barrel sustains stability during material input. User-friendly machine enables to reach high productivity standards. Product below 7% moisture is suitable for extruding. Applicable to lightweight materials. Low labor cost. Two stages filter makes material more clean
Force Hopper Feeding Plastic Recycling Machine (H Series)
Categories : Pelletizing & Compounding Lines
Economically Selection A valuable selection for clean materials, without pre-heating section for feeding device, this reduces the power consumption. The axle made by special steel with heat treatment. More tenacity and allows the materials to be fed sequence stably and also anti-bridging. Better Flexibility Genius recycling specialist team provides customized recycling systems, flexible options from sorting, feeding, degassing, filtration, to storage and packing systems. According to the clients’ needs presenting a smart and reliable plant. Cost Saving Energy cost save up to 10%. Labor cost is reduces as only 1~2 operators are needed to operate the whole plant. GENIUS
“Standard” Series SG-23E/30E/36E
Categories : Crushing, Shredding & Granulating Equipment
SG-23/30E series granulators have no significant differences with the standard model in construction and operability. The granulators feature quick blade change. They are suitable for centralized recycling of wastes or rejected parts from injection moulding, blow moulding and extrusion machines. Staggered blades can easily grab and granulate the materials. This design makes the machine work more efficiently and can reduce waste of energy to the minimum.
FILM/BAGS WASTE PLASTIC RECYCLING MACHINE : KCR-150
Categories : Recycling Lines by Application
The KCR-150 is a film/bag waste plastic recycling machine for HDPE, LDPE, and LLDPE film or bags, crushing and reprocessing the waste into pellets at an output of 300-400 kgs / hr.Waste is crushed by a 50 HP crusher, moved via a 2 HP screw conveyor into a 5" feed size, then collected in a 1400 L waste tank before entering a single-degasification Ø 150 mm screw (L/D ratio 30:1) heated at 141 kw across 8 zones and driven by an AC 125 hp inverter motor. The melt is extruded through a circular-shape die with a hydraulic-cylinder screen changer, cooled by a water-cooling system with a 2 HP pump, dehydrated by a 5 HP motor, and pelletized by a 2 pcs (spring) pelletizer.Model: KCR-150Suitable material: HDPE/LDPE/LLDPEOutput: 300-400 kgs / hrCrusher: 50 HPScrew diameter: Ø 150 mm, L/D ratio 30:1Heating capacity: 141 kw, 8 zoneDriving motor: AC 125 hp + InverterDie type: Circular Shape Extrusion DieWaste collecting tank: 1400 L
Plastic Recycling Machinery and Equipment
Categories : Recycling Lines by Application
The equipment is specially designed for reproducing wastage from PP/HDPE woven bags. BOPP, film.
Two Stage Cutter Compactor Plastic Recycling Machine (KRIEGERi Series)
Categories : Pelletizing & Compounding Lines
Compacting & feeding The high-speed compactor creates superior efficiency friction heat to compact the fluffy materials. Removed moisture during processed. Increase the highest throughputs for more productivity. Multiple Cooling Triple cooling sections – air cooling system, compactor body water cooling system and water spraying system. The operator can set the temperature of each to stably control the compactor’s temperature. Unrivaled Degassing Up to triple optional degassing zones equipped with vacuum pump. Maximize the degassing efficiency. Exhaust-Free Construct The unique development of two-stage extruder. A completely enclosed flow design, which prevents the molten polymer from releasing smoke. Better Flexibility Genius recycling specialist team provides customized recycling systems, flexible options from sorting, feeding, degassing, filtration, to storage and packing systems. According to the clients’ needs presenting a smart and reliable plant. Cost Saving Energy cost saves up to 20%. Labor cost is reduces as only 1~2 operators are needed to operate the whole plant. GENIUS
Hot Die Face Pelletizing System
Categories : Pelletizing & Compounding Lines
Cost Reduction The molten polymer from the extruder is passed to the die head. A rotating blade cuts the hot material as it exits the die hole and falls into a water ring for cooling. The operator does not need to draw the strands, which reduces the lump waste during re-drawing. More Uniformity, More Profit The pelletizing cutter is a universal joint design. The cutter adjusts the blade automatically during operation. Final plastic pellets are in uniform size in order to be sold at a higher price and bring you more profit.
Force Feeding Two Stages Die-Face Cutting Recycling & Pelletizing Machine
Categories : Pelletizing & Compounding Lines
High torsion, low-noice; temp. controls stability; double degassing Suitable for a variety of raw materials. Easy to operate; prority transcends traditional model. Low labor cost. Optional equipment- crusher and mixer, enables every batch of material to mix well. Two stages filter makes material more clean
DHL Bag Making Machine
Categories : Sealing Machines
1. Servo Motor Driven, Efficient mechanical structure produce 180 bags per minute. 2. User-friendly Control Panel, easy to understand easy to operate. 3. Digital control for production length adjusting, precise and less wastage. 4. Simple design, assemble precisely, durable, and easy for maintaining. 5. Easy operating, Pleasant cutting and sealing, with high firmness and no scratch. 6. Real time printing tracing control for accurate registration, when printing error occurred machine will stop automatically. 7. Universal Welding Device, easy operating and able to produce up to 15 kind of bag. 8. SHSS-T Twin Servo Motor Driven Model can produce two different size of printed plastic bag at same time. • The Conventional mechanical clutch / brake and rack & pinion system is also available.
Lithium-ion Battery Recycling System
Categories : Non-Plastic/Rubber Recycling Systems
LiBs Recycling Line mainly deals with lithium-ion batteries from different sources, including, End-of-Life vehicle cells and small modules, cell phone Li batteries and note book Li batteries ect. The design of plant include shredding, solvent drying, air separation and density separation for the purpose of retrieving valuable material like blackmass, copper and aluminum material. Shredding without energy-releasing to increase working efficiency. Block valves are mounted on the discharge of the shredder to stop the backflow of the gas. Solvent materials are dried and collected by heating process, plastic material and battery separator can be collected according to requirement. Vibration separation and air separation are applied to remove heavy impurity material of the battery casing and release black mass for recovery. Air and gravity separation for copper and aluminum in a dry environment. Control System with oxygen control, temperature control, camera surveillance PLC and host computer to ensure the safety (More About "8 Basic Guides to Lithium-Ion Battery Recycling Machines and Systems" ...)
Intensive Mixer
Categories : Rubber Mixers
Compounding For Rubber、Plastic & Chemical Industries Features: 1.Rotors: Two wings design with good cooling design. Excellent cooling ability. Anti-wearing treatment on the surface. 2.Chamber: Drill hole type jacket. Excellent cooling ability. Material contact surface: Hard chrome plating and fine polish. 3.Discharge door: Excellent sealing. No material leakage. 4.Ram: Drive by air cylinder. Good mixing and dispersion quality.
Screws And Barrels For Plastic Injection Molding
Categories : Screws and Barrels
Nan Yun's injection molding screw design team is able to provide ideal screw solutions for injection molding screw application. As the largest screw and barrel manufacture in Taiwan, Nan Yun has invaluable experience on screw barrel design for plastic moulding machine, vertical plastic injection moulding machine. there are more wear and tear on these components for injection moulding machine due to its cycle is longer than the rest of plastic machinery, so that it’s essential to have correct combination of material between screw and barrel for plastic injection molding to ensure a better performance and lasting lifetime.
Water Transfer Printing Dipping Machine- Semi-Automatic- YHT-222AX
Categories : Hydrographic / Water transfer Machines
YHT-222AX is 2 meters standard dipping machine with production arm which can dip various shapes of parts both manually or use production arm; and this machine also includes an auto spray system, working with both systems provide stable quality to the final product. The temperature controlled tank meet the medium volume requirement. High durability of tank structure with heavy loading production arm and water circulation by dual filters system are the best working tool for your Water Transfer Printing business. This transfer printing machine is perfect for large product and medium quantities of production/day.
Hydro Dipping Machine - Semi-Automatic - YHT222AXF
Categories : Hydrographic / Water transfer Machines
Dipping Tank + Auto Film Layer + Auto Spray System Dipping Tank 2 meters length. A powerful combination of all necessary important processes for WTP processing. From the very beginning laying, and the following activator spraying to the final dipping stage, done the main WTP process with only one button. This machine includes dipping tank, auto film layer and auto spray system. The combination of these 3 components not only makes WTP even simple, but more important– stable quality to the final product. The system can memorize multiple sets of different processes. This dipping machine is perfect for large product and medium quantities of production/day.
TC5500/TC5600 Multi-Cavity Hot Runner Temperature Controller
Categories : Runner Systems
Supports VNC remote control and Wi-Fi connectivity, with heater aging and mold leakage detection. The Mold View provides real-time monitoring of heating parameters for each zone. Also supports OPC UA for smart factory connectivity. ARICO - The Best Solution Of Hot Runner Temperature Controllers ARICO Technology and worldwide's rubber and plastic injection industry manufacturers have cultivated a long and stable co-operation relationship between us for many years. We was founded in 1987, base on sophisticated manufacturing technology, and focus on the research and development and innovation of industrial control instrument technology. We are not only good at producing customized precision Hot Runner Temperature Controllers and related application equipment, but also provides high-quality Hot Runner Temperature Controllers with the most convenient setting mechanism, stable quality, at a reasonable price to manufacturers in Taiwan, China, the United States, India, Argentina, Israel, Mexico, Thailand, Malaysia, Southeast Asia and other countries. In addition to accumulating and stabilizing partners for related instruments with Hot Runner Temperature Controllers, ARICO continues to conduct research and development in order to provide more stable and efficient machine stability, just for achieving a higher efficiency and stable instrument technology level on temperature control, displacement sensing, pressure sensing, injection molding machine IoT on rubber and plastic industry.
TC53 Hot Runner Temperature Controller
Categories : Control Equipment / Systems
TC53 combines cost-effectiveness with a modular configuration, featuring potential leakage prediction and early warning, automatic mold recognition with quick parameter loading, and an intuitive mold view for faster fault detection. With OPC UA support, TC53 enables smart factory connectivity.
Hot Runner Temperature Controller - TC50
Categories : Runner Systems
HMI: 7”LCD display with touch panel Detecting the leakage of material Group setup function Mold Memory Power balance detection and display Synchronous heat up and cool down Self diagnosis log Arico
High Speed Mono Extrusion Coating & Laminating Machine (WEL-H Series)
Categories : Extrusion Coating Machines
In order to save the wastage of web path & minimized the film threading time. The machine adopt leading brands T-Die to ensure the stable performance & constant high quality coating gauge, The screw and barrel has strict designed & treated to achieve well mixed of resin. Whole machine automation and tension with PLC control and all un/rewinders with nonstop turret auto splicing.The operation of the machine is very simple and user-friendly. The high speed version of mono extrusion coating & lamination machine adopted more advance equipment, such as auto air gap adjustment unit and auto water temperature control device. Those extra function allow to saving many operation procedure during the production. Thus the operator can be more concentrated on major operation and enhance the finished product quality.This type of machine is suitable for more high productivity demand.
Bag Making Machine for Flower Sleeves
Categories : Bag Making Machine by Applications
Servo motor - Accuracy and highspeed @180 bags Malfunction alarm / stop - Abnormal temperature / No material feed / Photocell track miss / Bag jam
Bottle to Bottle Recycling Plant
Categories : Recycling Lines by Application
- Features of Extruder: This new extrusion system brings together the familiar superior plasticization and homogenization of a parallel twin-screw extruder with the specific advantages of the conical twin-screw system. The screw is equipped with easy changeable shear and mixing elements which allow adjusting the plasticizing exactly to each demand. Effective degassing supported by a vacuum pump removes monomers in the front of the plasticizing unit • Big intake section / very good in-feed behavior • Conical design ensures very good screw filling • Therefore, high output per screw rotation (kg/rpm) • High torque possible because of huge screw shaft diameter • Very stable pressure behavior • Excellent homogenizing offered by the co-rotating system • Excellent feeding performance • Small melt dwell time distribution inside the processing unit • Therefore low melt temperature • Therefore low energy consumption - Features of SSP In the SSP process, the PET pellets are further decontaminated and their molecular weight is increased to obtain high-quality bottle grade resin, which meets the regulations of the authorities and requirements of the packaging industry. SSP and decontamination of migrated substances are diffusion controlled processes. The main design parameters are product temperature and residence time. The solid-state polycondensation process (SSP) is required to upgrade the molecular weight of the amorphous PET pellets to high-quality bottle grade resin, which meets the regulations of the FDA and requirements of the packaging industry. • Especially suitable for small and medium enterprises in the third world countries which has no polymerization facility. • High I.V. chip downstream users • Stable performance, economic investment and high C/P value. • Long-term experience and quality control method of washing line will provide excellent and stable quality of PET flakes for continuous and stabilized feeding of pelletizing and SSP. • Energy-saving and environmental-friendly: reuse heat energy from pelleti
6 Color PE Tube Dry Offset Printing Coating Machine PCD-80-06-RE
Categories : Hot Stamping Machines
Precise index ensures accuracy of every movement. It is easy to disassemble the printing mandrel. Tube feeding system works with detector. Coating mechanism will not move. Without tubes on mandrels. Equipped with precipitator. Corona system can keep tube clean before printing. With optional sleeve printing mechanism. Tubes are headed directly after printing. No double-heading or double cutting procedures and save material. Vastly used on printing different shape of tubes.
Co-extrusion Coating & Laminating Machine (WCL Series)
Categories : Extrusion Coating Machines
In this fast changing packaging market the multi-layer laminates demand has increased. The Co-extrusion machine allows to use two kinds resin or more by two or more extrusion units to create multi-function extrusion layers. The variety of resin after melted and go through the feed block then join into the T-die. The side screw has corrosion resistance treatment. It’s fine to work with acid copolymer resin, such as EVA, EAA, EMAA and Surlyn etc. The barrel heated by ceramic heater to ensure more energy saving and short start up time. Worldly also developed the exclusive extrusion output control system with Germany leading dosing system company. So it provides very accuracy and stable output and coating gauge control during the production. It can save more material especially for long run job. The high speed H series version of the rewinding splicer adopted with tracking roller device. It provides two kinds gap & contact winding mode and gives uniform and perfectly straight finished winding during high speed running. Also the taper tension can proper control the winding from the beginning roll. So it can reduce the wastage and avoid the wrinkle generate at the inner roll.
Bi-metallic Screws and Barrels
Categories : Screws and Barrels
Over Welding of nickel based alloy on top of the thread surface (screw) and internal diameter (barrel). +Evenly hardened surface with 2mm thickness. +Hardness will not decrease under normal temperature. +The hardened surface is 2 or 3 times more wear-resistant than regular surface. bimetallic
Laboratory Intensive Mixer
Categories : Dispersion Kneaders
The 1.8L Laboratory Intensive Mixer is designed for material research and develpment applications in the laboratory. The heating chamber (mixing chamber) and rotorsave built with water circulation sleeves assuring excellent cooling affect and heat transfer efficiency.
Force Side Feeding Plastic Recycling Machine (RECO Series)
Categories : Pelletizing & Compounding Lines
Increasingly Feeding The force side feeding device creates a very stable feeding flow. With stable feeding, the main screw is always fully loaded with materials, which ensures the highest output performance. Increase the output capacity by up to 50%. More Labor-saving The feeding control system monitors the ampere and controls the feeding speed automatically. Only 1~2 operators are required for an entire plant. Better Flexibility Genius recycling specialist team provides customized recycling systems, flexible options from sorting, feeding, degassing, filtration, to storage and packing systems. According to the clients’ needs presenting a smart and reliable plant. OUTSTANDING PERFORMANCE Increase the output capacity up to 50%. Labor cost is reduces as only 1~2 operators are needed to operate the whole plant. GENIUS
Two Stage Hopper Feeding Plastic Recycling Machine (Hi Series)
Categories : Pelletizing & Compounding Lines
Economically Selection A valuable selection for clean materials, without pre-heating section for feeding device, this reduces the power consumption. The axle made by special steel with heat treatment. More tenacity and allows the materials to be fed sequence stably and also anti-bridging. Unrivaled Degassing Up to triple optional degassing zones equipped with vacuum pump. Maximize the degassing efficiency. Exhaust-Free Construct The unique development of two-stage extruder. A completely enclosed flow design, which prevents the molten polymer from releasing smoke. Better Flexibility Genius recycling specialist team provides customized recycling systems, flexible options from sorting, feeding, degassing, filtration, to storage and packing systems. According to the clients’ needs presenting a smart and reliable plant. Cost Saving Energy cost saves up to 10%. Labor cost is reduces as only 1~2 operators are needed to operate the whole plant. GENIUS
Two Stage Force Side Feeding Plastic Recycling Machine (RECOi Series)
Categories : Recycling Lines by Application
Increasingly Feeding The force side feeding device creates a very stable feeding flow. With stable feeding, the main screw is always fully loaded with materials, which ensures the highest output performance. Increase the output capacity by up to 50%. Unrivaled Degassing Up to triple optional degassing zones equipped with vacuum pump. Maximize the degassing efficiency. Exhaust-Free Construct The unique development of two-stage extruder. A completely enclosed flow design, which prevents the molten polymer from releasing smoke. Better Flexibility Genius recycling specialist team provides customized recycling systems, flexible options from sorting, feeding, degassing, filtration, to storage and packing systems. According to the clients’ needs presenting a smart and reliable plant. OUTSTANDING PERFORMANCE Increase the output capacity up to 50%. Labor cost is reduces as only 1~2 operators are needed to operate the whole plant. GENIUS
Cutter Compactor Plastic Recycling Machine (KRIEGER Series)
Categories : Crushing, Shredding & Granulating Equipment
Compacting & feeding The high speed compactor creates superior efficiency friction heat to compact the fluffy materials. Removed moisture during processed. Increase the highest throughputs for more productivity. Multiple Cooling Triple cooling sections – air cooling system, compactor body water cooling system and water spraying system. The operator can set the temperature of each to stably control the compactor’s temperature. Better Flexibility Genius recycling specialist team provides customized recycling systems, flexible options from sorting, feeding, degassing, filtration, to storage and packing systems. According to the clients’ needs presenting a smart and reliable plant. Cost Saving Energy cost saves up to 20%. Labor cost is reduces as only 1~2 operators are needed to operate the whole plant. GENIUS
X-Ring
Categories : Industrial Parts & Safety Gear
X-Rings (Quad-Rings) – High-Performance Sealing Solution X-rings, also known as Quad-rings, are high-performance elastomer sealing rings with an X-shaped cross-section. Designed as an advanced O-ring alternative, X-rings provide superior sealing reliability in both static and dynamic sealing applications. Featuring four sealing lips, X-rings deliver clear performance advantages: Minimize leakage and ensure reliable sealing even under pressure fluctuations Enhance pressure stability, improving system safety and consistency Increase sealing efficiency while reducing wear and maintenance costs Extend service life in dynamic applications with movement and friction Trusted solution for hydraulic systems, pneumatic equipment, automotive sealing, and industrial machinery Manufactured from materials such as NBR, FKM (Viton® equivalent), and EPDM, X-rings offer excellent chemical resistance, durability, and elasticity across a wide temperature range, making them ideal for demanding industrial environments.
