PRM-TAIWAN
Products
Honeycomb Dehumidifying Dryer (DHC)
Honeycomb Dehumidifying Dryer (DHC)

Categories : Dryers and Dehumidifiers For Plastic Materials

1. Import Honeycomb of ceramic fiber , exceed dew point below -40°C of dried air 2. Intelligent Microprocessor Control and premium overheat protector. 3. Accurate PID temperature controller. 4. Well designed Solid State Relay (SSR) and protective devices.

Mould Sweat Dehumidifiers - SMD-H
Mould Sweat Dehumidifiers - SMD-H

Categories : Dryers and Dehumidifiers For Plastic Materials

SMD series mould sweat dehumidifiers are designed to remove the moisture sweat from condensing on the mould surface. Forming of moisture sweat on the mould surface is due to the use of chilled water for reducing the moulding cycle time, particularly while moulding of the PET preforms. This series of machine uses honeycomb rotor to carry out dehumidifying function, which generates a dry airflow with dew point ranging from 0℃ to -10℃, and ensures the surrounding air of mould remaining in a low dew-point temperature. It provides constant low dew-point surrounding air to the mould surface all year round without being influenced by the change of seasons.

Honeycomb Dehumidifiers-SD-H
Honeycomb Dehumidifiers-SD-H

Categories : Dryers and Dehumidifiers For Plastic Materials

SD-H honeycomb dehumidifier is mainly used to provide low dew point dry air, which can collocate with hopper dryer to process highly hygroscopic engineering plastics. This series of machines can reach an average dew point temperature of -40℃ with right sttup and maximum drying air volume can reach 4,000m³/hr. If some dry materials are volatile, they must use EOF filter.