Injection Molding Machines

Double color injection. Three-side open space makes removing and insert of automation equipment easier.

PET Preform Injection Molding Machine Servo - 120PET to Servo 470PET

SHINE WELL MACHINERY CO., LTD.

Standard L/D ratio of 24 times and above for good plasticizing quality. Application of barrier type screw features and an extra barrier ridge to ensure homogenous plasticization when melting PET. ...

lienyu

Categories : Toggle Clamping Injection Molding Machines

lienyu

LIEN YU MACHINERY CO., LTD.

Bait Making Machine - YH Series

Use plunger-type material less barrel, material is silicone.

EDEX TECHNOLOGY CO., LTD.

VTOR- Vertical Rotary Injection Molding Machine

Categories : Automatic Injection Molding Machine

● The smallest rotary table design, max mold diameter. ● Suits for Plunger type injection or screw type injection system. ● Patented active bypass auxiliary plasticization system design. ● 2-pla...

Reel to Reel Injection Molding Machine

Reel to Reel Injection Molding Machine. Fully automated feeding system. A continuous carrier strip fed from rear reel through the front reel (take-up reel) of the injection molding machine, the pla...

ASIAN PLASTIC MACHINERY CO., LTD.

High Speed Injection Molding Machine (TSV Series)

Categories : Hydraulic Clamping Injection Molding Machines

• The double hydraulic cylinder provides secure hold on pressurefor the injection carriage eliminating nozzle leakage. • The toggles are lubricated with the graphite bronze bush...

Vertical Shuttle Table Injection Molding Machine

Vertical direct hydraulic clamping system is designed for accurate, safe operation, especially suitable for insert molding. With double slide table or rotary design, put in, takeout products and mo...

SHINE WELL MACHINERY CO., LTD.

Two Platens Injection Molding Machine - 400MBE to 2300MBE

Categories : Injection Molding Machines by Platen

The actuator of the clamping force is installed on the fixed platen of the conventional two platens injection molding machine. The design of the MBE model has four sets of traveling cylinders insid...

Shaftless Type, Multi-Winding-Stands, High Speed Slitting Machine－Supra Series

Categories : In Mold Labeling Injection Molding Machines

DAH BAH MACHINERY INDUSTRIAL INC.

YR Multiple Embedded Rotary Injection Molding Machine Series

Vertical clamping with vertical injection. Rotary table oscillate 180 °, rotate back / forth for easy loading and finished parts pick out, to increase productivity. Rotary table with location p...

Car Hemming Machine - YT SERIES

- Vertical clamping, horizontal injection, and large spaces between posts with strong structure. Easy to disassemble large molds.

Vertical Plastic and Injection Molding Machine YHL SERIES

- Vertical upright clamping, straight shot structure, simple structure. - The design method of shooting the center shifting element makes the three-sided space more open, and can be applied to the...

SHUENN JAAN MACHINERY CO., LTD.

Hydraulic Clamping Injection Molding Machine DHT Series

Categories : Hydraulic Clamping Injection Molding Machines

Direct hydraulic clamping injection molding machines are designed without toggle mechanisms that enable to avoid the toggle wear. This model can increase the position accuracy and is good for high ...

5 Gallon PET Preform Injection Molding Machines & Whole Plant Turn-Key Solution

KING’S SOLUTION CORP. acquired 18 years of 5-gallon PET preform production practice experience from KING'S MACHINERY ENGINEERING CORP. We provide the full process of Dehumidification Dryi...

Heavy Duty Double Toggle Injection Molding Machine

ASIAN PLASTIC MACHINERY CO., LTD.

The new design has ensured maximum space between tie bars, as well as a large daylight area. The fixed and moving platens are designed in such a way that the yensure complete accuracy and precision...

Low Pressure Injection Molding Machine

Categories : Low Pressure Injection Molding Machines

Our LPM Low Pressure Molding Machine, CE marking certified, with its very low injection pressure 20~500psi (1.5~35 BAR) into the mold cavity and electronic parts to be encapsulated. Hot-melt Polyam...

Atos- Horizontal Parting Line Plunger Type Injection Molding Machine

EDEX TECHNOLOGY CO., LTD.

● Without the sprue, it saves a lot runner resin weight. ● Produce precise micro injection products. ● Products with multi cavities can be highly concentrated to the center. ● 2-platen 4-cylinde...

C Type / Tie-barless Rotary Table - YC Series

C Type / Tie-barless Rotary Table - YC Series - C-type structure, the deformation is small. Easier for insert molding.

ASIAN PLASTIC MACHINERY CO., LTD.

All Electric Machine With SPARK Series

Categories : Automatic Injection Molding Machine

Features: Combining ultra-thin high speed and ultra-thick low speed Revolution round template design with Japanese super rigid frame Super high-speed intelligent computer controller With ...

16-station Disc Machine YHL SERIES

The number of stations is developed according to customers needs with precise disc positioning.

Custom Vertical LIM LSR Injection Moulding Machine

Precision vertical clamping system (parallelism/ flatness : 0.02/100mm) , heavy-duty tie-bars, and low-pressure mold clamping work together to greatly extend machine & mold life. Increased prod...

JON WAI MACHINERY WORKS CO., LTD

jon-wai

Categories : Injection Molding Machines by Color

jon-wai

hmi-iml

Categories : Injection Molding Machines

hmi-iml

HMI IML SYSTEM CO., LTD.

DG250 Mini Injection Molding Machine

Categories : Automatic Injection Molding Machine

1.Humanized Operation Panel 2.Aut-lubricate System 3.Injection System Adopts Precision Linear Sliding Track 4.Injection Purge Cover 5.Hopper Move-out Device

DER GANG MACHINERY CO., LTD.

BMC Injection Molding Machine - 300BMC to 850BMC

SHINE WELL MACHINERY CO., LTD.

Common commissioning for molding products such as electric parts and auto headlamps with insulated characteristics. Steel and FRP plates are installed on the fixed and movable platens to insulate...

Multi-Color Injection Molding Machine

Tie-bar less and big rotary design gives more space for operation. The cable hanger set up in the center of the rotary and out of the molding area, avoids any danger when workers insert the cables ...