English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
Activator
Categories : Hydrographic / Water transfer Machines
Our Activator are engineered to optimally activate water transfer printing films. Packing: 15kgs/ drum
Vertical Mixer
Categories : Mixers and Blenders
Storage the finished product. Reduce the labor cost for packing the pellets. Customized size is acceptable
Automatic Packing Tape Slitting & Rewinding Machine
Categories : Slitters and Rewinders
Application： BOPP tape, cellophane tape, masking tape… (according to customer informed material)
JIT Shopping Bag Making Line (JIT Series)
Categories : Bag Making Machine by Applications
The JIT Series is JANDI'S in-line shopping bag making line. Blown film extrusion, printing and bag making run as one continuous process, so resin enters at one end and finished, printed shopping bags leave at the other; there are no intermediate film rolls to store, transport or re-load. This listing covers the series as a whole, which is offered in mono-layer semi-automatic and full-automatic types, an ABA full-automatic type and a two-colour full-automatic type. Because the steps are linked, JANDI'S describes the line by what it removes from a conventional three-machine set-up: separate handling between extrusion, printing and bag making, the floor space and storage for film rolls, and the die-cut scrap, which is recovered on-line and fed back. Line composition, printing configuration, bag size and output are configured with the buyer at quotation. Type: in-line shopping bag making line, JIT Series Process: blown film extrusion, printing and bag making in one line Configurations: mono-layer semi-auto, mono-layer full-auto, ABA full-auto, two-colour full-auto Single-side printing configuration, colour count confirmed at quotation Die-cut scrap recovered on-line No intermediate film roll storage between steps Line composition, bag size and output configured at quotation
Hot Cutting T-shirt Bag Making Machine with Automatic Packing Unit
Categories : Bag Making Machine by Applications
2 Lines & with 2 photocells
Twin-Line High-Speed T-shirt Bag Making Machine (Hot-Cut System) + Auto-Packaging System TPFA-V+AP
Categories : Bag Making Machine by Applications
Auto-packaging solution - Saving collection labour further by auto-packing solution. Finished piles are auto-packaged individually by printed outer bags. Customized solutions available High speed hot-cut system - For printed T-shirt bags. Photocell & servo registers accurate print position. High speed hot-cut system available in 200/250/300rpm systems. Twin-servo system - 2 servo controlling 2 lines with printing register accurately.
JS 602D (Double Rows “I” Shape Tetra Pack Straw Packing Machine)
Categories : Straw Packaging Machines
Straw Size : 4.2mm outer diameter x 90~140mm * 2 Packing Material : OPP Film Speed : 1000~1200 pcs/min Pitch between 2 Straws : 15 mm Copper Forming Pressing Roller :1 set Film take up roller with vacuum :1 set (Material: Silicon) tetra pack
Tetra Pack Straw Packing Machine and Turn Key JS-602
Categories : Extrusion Lines For Pipes and Profiles
● The machine can perform sharp end cutting on the straws, ensuring all sharp ends are packing in the same direction. ● All machine speeds are variable. Tetra Pack
JS 602U "U" Shape Tetra Pack Straw Packing Machine with Zigzag/Megabox Folder
Categories : Straw Packaging Machines
The machine can perform sharp end cutting on the straws, ensuring all sharp ends are packed in the same direction. All machine speeds are variable. High production rate of 350-500 pcs/min. (JS 602U) Automatic machine stop in the event of straw jamming. Automatic product counting. Product quantity preset. Once the present value is reached, the alarm will sound. All rollers are manufactured from aluminum. Suction device for sharp end waste. The machine is easy to operate with minimum trouble. Other lengths are available Please confilm lengths (B) and (C) when ordering. SHARP END CUTTING MECHANISM The machine can perform sharp end cutting on the straw without the need for an additional machine. This allows sharp ends of straws to wrap in the same direction. SEALING WRAPPING MECHANISM The mechanism performs waste suction, pressing and sealing operations. Copper forming pressure roller is designed with 20 cavities. Tetra pack
JS 603 STRAW GROUP PACKING MACHINE
Categories : Straw Packaging Machines
JUMBO STEEL JS 603 Straw group packing machine provides more choices for straw packing to meet your specific needs. Upon request, the machine can pack 50 to 100 pcs straws in a pack-with high effciency. Also, it's available to connect the JS 603 Straw Packing machine to straw making machines or bending machine with a conveyor be a complete production line which results in higher productivity and greater convenience.
JS 606 Straw Group Packing Machine
Categories : Straw Packaging Machines
JS 606 Straw group packing machine provides more choices for straw packing to meet your specific needs. The machine can pack 50 to 100 pcs straws in a pack-with high effciency
JS 605PW INDIVIDUAL STRAW PACKING MACHINE
Categories : Straw Packaging Machines
HIGH SPEED PRODUCTION : 1000 pcs/min. Ideal for packing a wide varlety of straws, the JUMBO STEEL JS 605PW Straw packing machine provides a high packing rate of 800-1000 pcs/min, and incorporates and automatic, two-color water base ink printing capability. The packing size is fully adjustable with a length range from 190 mm to 260 mm. JUMBO STEEL's Straw packing machine not only makes your straw packing operations easier and more efficlend, but provides you with highly rellable perfromance for year affer year operations. JS 605PW Packing material is OPP or paper, OPP film need to be pre-printed or keep transparent.
JS 602/4S Individual Straw Packing Machine (4 Side Sealing, by OPP Film)
Categories : Straw Packaging Machines
JUMBO STEEL JS 602/4S Individual straw packing machine provides more choices for straw packing to meet your specific needs. Upon request, the machine can pack straw length 19~26cm, adjustable with high efficency. Also, it's available to connect JS 168 Straw bending machine with a conveyor be a complete production line which results in higher productivity and greater convenience.
JS605PW + JS603-600E In Line One Set Straw Individual Packing and Auto Bagger Flow Packer
Categories : Straw Packaging Machines
FULLY AUTOMATED, IN-LINE ONE SET STRAW INDIVIDUAL PACKING and AUTO BAGGER/FLOW PACKER FOR 100~200 PCS/BAG
JS 605PW + JS 603-B500 Fully Automatic, 2 sets of Individual Straw Packing Machine Inline to Straw Auto Boxer/Cartoning
Categories : Extrusion Lines For Pipes and Profiles
JS 605PW + JS 603-B500 Fully Automatic, 2 sets of Individual Straw Packing Machine Inline to Straw Auto Boxer/Cartoning
JS 285 PHA Marine Degradable Straw Making Machine
Categories : Extrusion Lines For Pipes and Profiles
Jumbo Steel Machinery Co., Ltd. is a leading manufacturer of straw making machines, supplying high-performance equipment to over 100 countries worldwide. Our machines are trusted by major straw suppliers for multinational brands such as Starbucks and McDonald’s, ensuring top-quality production for the food and beverage industries (F&B Industries). Our advanced straw making machines are designed for versatility, supporting a wide range of eco-friendly and traditional materials, including: Ø Plastic Material: PP (Polypropylene) Ø Biodegradable Materials: PLA, PHA, Cellulose Acetate, PHBH, Bamboo Fiber, Tea Fiber, and more. We also provide turnkey solutions for straw production, including straw bending machines and various types of packing machines to meet different packaging requirements. With a focus on efficiency, precision, and sustainability, our machines help manufacturers produce high-quality drinking straws that comply with global environmental and industry standards. Additionally, our after-sales service is highly regarded and widely appreciated by our customers, ensuring reliable support long after installation-even for those new to this industry.
Shaftless Type, Multi-Winding-Stands, High Speed Slitting Machine－Supra Series
Categories : Slitters and Rewinders
Materials PVC, OPP, PET, CPP, Shrinkable PP Film, Paper. Silicon Coated Paper, Metalized Paper, Self-adhesive Paper, Aluminum Foil + Paper, NCR Paper, Non-woven Cloth. Laminate flims (Toothpaste Multi-layer packing Material and others.) Rewinding Type Center rewinding with multi shaftless rewind stands. Unwinding Section Unwind-stand with shaftless hydraulic loading clamps. (Hydraulic up/down, left/ right moving). Equipped with edge position control (EPC) to ensure accurate slitting position. Equipped with pneumatic brake as well as electro/pneumatic converter for wide range tension control. Slitting Section Shear knife cutting or razor blade cutting in the air or groove is available according to material characteristics. Equipped with blower and expulsion tube. Rewinding Section Equipped with shaftless rewinding stands, heavy finishing rolls can be directly unload to the trolley. Easy for one-man operation. Static eliminating device equipped. Equipped with banana roller for film expanding.
High Speed Twin Lines Sheet Protector Making Machine With Auto Packing Line
Categories : Bag Making Machine by Applications
The MGA-17A-700DSPEX+17P-355A is a high-speed twin-line sheet protector machine with an integrated auto packing line, converting CPP and PP blown film into punched, heat-sealed A4 sleeves for ring binders and office filing. Four sets of servo motor controls run each line independently for stable dual-line production.A fully automatic white strip connecting system saves time when reloading the white ribbon, and a precision punching mold design supports high-speed output. The stable heat sealing station keeps sealing quality consistent at the bottom of each sheet protector, while the auto packing system reduces labor costs on the finishing end.Model: MGA-17A-700DSPEX+17P-355AFeed material: CPP & PP Blown FilmThickness (by gauge measurement): 0.028 - 0.1 mmEffective size: A4Output with packing system: A. 50 - 100 pcs/bag; B. 20 - 25 pcs/bag; 360 - 400 pcs/min; 160 - 200 pcs/minMachine dimension: 9000 (L) x 4713 (W) x 2295 (H) mmMachine weight: 7135 kgRequired power: 20 kw
Roll to Roll Flexographic Printing Machine
Categories : Flexographic Printing Machines
The HY7-206NRP is a 30 ton press for packing equipped with a carrier for feeding and delivering bags after manual packing. The unit is a vertical type hydraulic press. We also provide hydraulic baling press up 300 tons.
Double Bed Raschel Knitting Machine DR series
Categories : Industrial Knitting Machines
DR series knitting machine equips 2 needle beds which is suitable for the packing of industry, agriculture or fishery products. The control panel adopts inverters or servo motor to control speed, which are connected with the main motor which synchronizes the speed of rollers, so the operation is easy and convenient. And further, you can also choice auto cutting machine to save the cost of labors.
Double Bed Raschel Knitting Machine DR1-42
Categories : Industrial Knitting Machines
DR1-42 is special model for making tubular mesh which is suitable for fruit packing bag, especially for small package in super market and shopping center. The advantage of DR1-42 is high out put, perfect yarn feeding system and flexible size adjustment. The same mesh but different size bags could be made at the same time. Attach with Slitting and Extension Machine (SE-120-T), the performance is higher than the traditional circular knitting machine.
Force Hopper Feeding Plastic Recycling Machine (H Series)
Categories : Recycled Plastic Pelletizing Lines
Economically Selection A valuable selection for clean materials, without pre-heating section for feeding device, this reduces the power consumption. The axle made by special steel with heat treatment. More tenacity and allows the materials to be fed sequence stably and also anti-bridging. Better Flexibility Genius recycling specialist team provides customized recycling systems, flexible options from sorting, feeding, degassing, filtration, to storage and packing systems. According to the clients’ needs presenting a smart and reliable plant. Cost Saving Energy cost save up to 10%. Labor cost is reduces as only 1~2 operators are needed to operate the whole plant. GENIUS
Two Stage Cutter Compactor Plastic Recycling Machine (KRIEGERi Series)
Categories : Recycled Plastic Pelletizing Lines
Compacting & feeding The high-speed compactor creates superior efficiency friction heat to compact the fluffy materials. Removed moisture during processed. Increase the highest throughputs for more productivity. Multiple Cooling Triple cooling sections – air cooling system, compactor body water cooling system and water spraying system. The operator can set the temperature of each to stably control the compactor’s temperature. Unrivaled Degassing Up to triple optional degassing zones equipped with vacuum pump. Maximize the degassing efficiency. Exhaust-Free Construct The unique development of two-stage extruder. A completely enclosed flow design, which prevents the molten polymer from releasing smoke. Better Flexibility Genius recycling specialist team provides customized recycling systems, flexible options from sorting, feeding, degassing, filtration, to storage and packing systems. According to the clients’ needs presenting a smart and reliable plant. Cost Saving Energy cost saves up to 20%. Labor cost is reduces as only 1~2 operators are needed to operate the whole plant. GENIUS
1-Layer PE Wrapping Film Making Machine
Categories : Wrapping Machines
Designed to produce industrial stretch film, cling film for food packing purpose, can produce shrinkable film, LDPE/LLDPE film also Slitting devices are provided to produce exactly film width you need, no need extra Slitting machine Rotating die device is provided for higher quality & uniform thickness film Producing film thickness depends on raw resin from 0.008mm Purchasing fully automatic winder makes machine automatically & save time of operators & cut film easier Co-speed controller matches same speed for take-up unit and winder to avoid film to be stretched We didn’t show all our models, please don’t hesitate to contact us for bigger extruders.
In-Line Glue Coating Packing List Bag Machine
Categories : Plastic Bag Making Machines
The MGA-95-500 is Ming Jilee's in-line glue coating packing list bag machine, producing PE bags with an integrated glue coating station in a single in-line process. It processes PE film in a thickness range of 0.045 - 0.08 mm, with a maximum bag size of 350(L) x 400(W).The in-line glue coating station applies adhesive up to a maximum width of 400 mm, and the machine can cut up to 3 pcs per cycle, reaching an output of Max. 120 cycle/min when run with the packing system. The complete line measures 12,050(L) x 1,750(W) x 2,050(H) mm and weighs 6,730 kg, with a power consumption of 30 kw.Model: MGA-95-500PE Thickness Range: 0.045 - 0.08 mmSize Range: Max. 350(L) x 400(W)Max. in line glue width: 400 mmMax. quantity per cycle cut: 3 pcsOutput (with packing system): Max. 120 cycle/minMachine Dimension: 12,050(L) x 1,750(W) x 2,050(H) mmMachine Weight: 6,730 kgPower Consumption: 30 kw
Double Needle Bar Raschel Machines
Categories : Industrial Knitting Machines
High-Speed Double Needle Bar Raschel Machines for Manufacturing Packing Sacks ．Onion bag machines: (so-called "ready-made sacks" for packing orange, lemon, potato, ...etc.). ．For special wide nets. ．For double layered nets.
High Degree Water-type Mold Temperature Controller
Categories : Control Equipment / Systems
Economic and advanced design for high degree is your new choice. Water-type mold temperature controller (High Degree) do not pollute environment with oil gas that is the best choice for electronics, medical and cosmetic packing industries where strictly require better working environment. When oil-type model cannot satisfy for your need, you should change to water compression one. By direct supply method, it will not transform to steam even the temperature up to 160℃. Heat up faster, long machine life, high stability, precise control within ±0.3℃, and energy save for you. Precise temperature control and high stability control by 0.1℃ as a unit to display. The inaccuracy rate below ±0.3℃. Perfect for any precise requirement such as electronics industry. Heat-insulated design extend operating lifetime. PID temperature controller. Excellent overheat security protecting device. SSR relay control for durability. Unique design to prevent water leakage and pollution when mold is changed.
Masks Horizontal Flow Packaging Machine
Categories : Sealing Machines
The MGA-MSK-P is a horizontal flow packaging machine for wrapping finished masks, sealing them into bags formed from OPP, OPP/PE, or OPP/CPP packing film. It handles film thickness from 20 to 60 micron and produces bags from 90 to 350 mm in length, up to a maximum width of 450 mm.The machine accommodates packed products from 20 to 90 mm in width, running at 20 to 95 cycles per minute. It draws 4.5 kw of required power within a footprint of 3,880 (L) x 940 (W) x 1,530 (H) mm.Model: MGA-MSK-PPacking material: OPP, OPP/PE, OPP/CPPFilm thickness: 20 - 60 micronBag length: 90 - 350 mmMax. width: 450 mmPacked product width range: 20 - 90 mmOutput: 20 - 95 cycle/minMachine dimension: 3,880 (L) x 940 (W) x 1,530 (H) mmMachine weight: 800 kgRequired power: 4.5 kw
Servo Motor Driven Bottom Sealing Plastic Bag Making Machine
Categories : Plastic Bag Making Machines
Servo Motor Driven Bottom Sealing Plastic Bag Making Machine Laundry Bag, Garment Bag, Calendar Bag, Glove Bag, Packing List Envelope, T-shirt Bag,
Fully Auto. Mylar Index Divider Machine with Packing System
Categories : Bag Making Machine by Applications
The MGA-56MP-700 is a fully automatic Mylar index divider machine with an integrated packing system, processing paper, PVC, or PP in roll form into A4 or A3 index dividers, including multi-color Mylar dividers. Multi-color printing film works with servo motor digital computer control to achieve automatic color-dividing, with the full set finishing in one pass including auto packing.An auto E.P.C., edge trimming device, first-sheet and tap hot stamping, changeable punching tool, and auto pamphlet inserting unit run alongside automatic edge lining, edge modification, gold stamping, punching, cutting, auto-packaging, and auto counting in a single automatic sequence. Precise, durable punching molds and high-technology electronic control keep the punching position accurate, while the control and monitor system stops the machine automatically with an alarm if a problem occurs.Model: MGA-56MP-700Feed material: Paper, PVC, PPAvailable size: A4, A3Single layer film thickness: 0.06 - 0.20 mmEffective cutting size: 150 - 364 mm (width) x 150 - 295 mm (length)Output: Mylar divider 15 - 30 pcs/min; Index divider 50 - 100 pcs/minMachine dimension: 11,800 (L) x 4,650 (W) x 1,800 (H) mmNet weight: 4,660 kgRequired power: 12 kw
T.B Type Hydraulic Baling Press
Categories : Stacking Devices
The HY7-30TS is a 30 ton press for packing equipped with a carrier for feeding and delivering bags after manual packing.
PP Blown Film Machine
Categories : Blown Film Extruders Lines
Water cooling system makes glossier and more transparent PP film for food or garment packing. Unique screw provides high production for a long period life and holds film uniformly steady. Dry chamber provides a fast water removal, for food package purpose. Optional tension control for winder provides good tension film in rolls, used in food packaging & printing. We didn’t show all our models, please don’t hesitate to contact us for bigger extruders.
Dry Laminating Machine (WDL Series)
Categories : Industrial Lamination
In response to the mass demand of various materials and multiple methods in flexible packing markets, WORLDLY provides the WDL multiple functional drying laminating machineries as the ultimate solution. With this machine automatic taper tension settings can also be easily adjusted on the panel according to different technology process applications. Drying temperature is adjusted by PID automatic temperature controller that balances the required temperature. Internal transition rollers in the drying tunnel are connected together with belt and transmitted by an independent AC motor. In addition, to insure smooth and solid firm laminating results, the machines laminating unit uses a three roller design. The counter-roll pulled by pneumatic pistons, and adjustable from both sides to stiffen the rider roll. With these specific designs on the WDL, provided is increases production and minimize loss which are essential for flexible packaging.
6 Rolls T-shirt Bag Making Machine
Categories : Bag Making Machine by Applications
with automatic packing unit