Die Arm
Categories : Molds and Dies
Bolster extensions or Die Arms make it very easy and simple to pull out or push a die in. It also allows for a forklift or crane to remove and load dies easily. Die stoppers at the end of each Die ...
TR Rotating Clamps
Categories : Molds and Dies
The TR system uses a hydraulic mechanism with a 90° turning movement to lock molds and dies into position. This heavy duty Clamping System is available in three different models with a clamping...
Thermoforming molds for WM-FC 780 E
Categories : Thermoforming Molds
Thermoforming molds designed for WM-FC 780 thermoforming machines. Benefit from multi-station capabilities, including forming, cutting, and stacking, for a streamlined production process.
Hot Runner System
Categories : Hot Runner Systems
Hot runner system is an advanced injection molding system. Nozzle and manifold block are heated under temperature control of the Temp-controller, so that the plastics from the nozzle of injection m...
Rotary Die Head & Rotator
Categories : Extrusion Dies / Dies Heads
+For LDPE / LLDPE blown film machine. +To stablely control the product thickness, enhance cooling effect and improve product quality.
Tray Thermoforming Moulds
Categories : Thermoforming Molds
Medium thermoforming machine, which means the forming sheet width is in between 800 mm to 1200 mm, like Asano, Cheng-Mei, Chudong, and VFK......etc Medium thermoforming mold is the most common mold...
ABA Double Die Head
Categories : Extrusion Dies / Dies Heads
The Blown Film Die Head is the core component which is called the ‘‘heart’’ of the Plastic Film Blowing Machine. The main function of Die Head is to distribute the melted po...
Tax Pneumatic Clamps
Categories : Molds and Dies
The TAX system uses an automatic pneumatic pressure mechanism to individually clamp upper dies. This system is well suited for both smaller and larger hydraulic presses.
DR Die Lifter
Categories : Molds and Dies
These Spring-Loaded Die Lifters easily slide into different sized T or U-slots on the bolster by adding spacers to the side walls of the Die Lifters. This allows for accurate and easy die positioni...
Flat Mold Clip
Categories : Molds and Dies
Make the work piece stable and not do any subtle movement.
Magnetic Clamping System
Categories : Injection Molds
Electro-permanent magnetic quick mold change system is perfectly for 50~4000 Tons injection molding machines.The latest magnetic structure and outstanding design of magnetic circuit achieves a 20% ...
Two Color And Multi-Color Die Head
Categories : Extrusion Dies / Dies Heads
•Die head can be manufactured to meet customer’s specific extruding capacity and bag width. •Precision construction throughout assures maximum uniformity of film thickness. •Di...
Extrusion Dies Optical Sheet
Categories : Extrusion Dies / Dies Heads
Optimum manifold design base on customer’s material property with excellent polishing technique SUITABLE AVAILABLE POLYMERS INCLUDING PC, PMMA, PS, MS
Plastic cosmetic moulds
Categories : Injection Molds
Mold size: 500 x 620 x 445 mm Mold weight: 885kg Injection machine: 260Ton Surface: Mirror polish & carving
P-11
Categories : Injection Molds
Hollow Plate Extrusion Dieing Machines
Categories : Extrusion Dies / Dies Heads
PP/PC HOLLOW PLATE EXTRUSION DIEING MACHINES
Taiwan Plastic Injection Mold Treadmill Cover
Categories : Injection Molds
Mold size: 1000Wx1400Lx930H mm Mold weight: 5550kg Injection machine: 850T Surface polish
P-15
Categories : Injection Molds
Extrusion Dies Lamination
Categories : Extrusion Dies / Dies Heads
EXTRUSION DIES LAMINATING DIES CFJ Width: 500 ~ 5000 mm Die lip span: 0.6 ~ 1 mm Extrusion capacity: 100 ~ 500 kg/hr Width adjustment: internal deckle system Die lip adjustment: manual or motor dri...
P-20
Categories : Injection Molds
Plastic Pallet Table Injection Mould
Categories : Injection Molds
Mold size: L-1500 x 1500 x 1028 mm / R-1300 x 1505 x 1008 mm Mold weight: L-13.8Ton / R-11.5 Ton Injection machine: 2200TON
Motorcycle Injection Molds
Categories : Injection Molds
The appearance of surface mainly finished in texture or plating. Meet customer high requirements for product fitting.
Automatic Feeding And Laminating Machine ALM-700
Categories : Molds and Dies
Unique feeder mechanism to enable lamination and processing by operators without having to keep up with machine operating speed. Unique, exclusive, patented film laminating mechanism to ensure no ...
S-07
Categories : Injection Molds
P-04
Categories : Injection Molds
SOFT TOOLING
Categories : Hot Runner Systems
For small production runs or for prototyping, soft tooling is a fast and low cost way to build multiple copies of your product. To provide quick mold soft tooling services our engineers were sent t...
Grille Injection Molds
Categories : Injection Molds
Grille Injection Molds Applications: Grille for Cars Air bag Cover Cup Holder for Cars Dashboard Vent for Cars
OPEN GATE-ANPT
Categories : Hot Runner Systems
The most used nozzle. There is a torpedo inside the nozzle to have a circularity gate and guide the melt along the torpedo to flow into the cavity, and therefore can reduce the production of cool ...
DOUBLE INJECTION MOLDING
Categories : Injection Molds
Double Injection, sometimes known as 2 material 2 shot molding or 2K molding, is an innovative manufacturing process used to produce complicated molded parts from two different materials. Through a...
Fix / Variable / Rapid Geometry Feedblock
Categories : Extrusion Dies / Dies Heads
FIX GEOMETRY Simple manifold structure, few retention points Customized manifold design, 2 or 4 inlets, for different Extrusion Die inlet as required by the customer Precision internal manifold des...
Extrusion Dies MELTBLOWN DIES
Categories : Extrusion Dies / Dies Heads
SUITABLE AVAILABLE FOR POLYMERS INCLUDING PET And PP High processing precision. Internal heating with heating rod, external heating with heating board, temperature control by heating oil cycle to e...
Coating Dies Slot / Slit
Categories : Extrusion Dies / Dies Heads
Slot/Slit design, excellent manifold geometry design, solvent resistant alloy, super mirror grinding technique SUITABLE APPLY TO Water Base /Oil Base / Non-Solvent Type Liquid Straightness precisio...
S-06
Categories : Injection Molds
Alligator mouth (single-color and two-color)
Categories : Injection Molds
Rain boot mould:PVC wellies, boots or foam material wellies and boots shoe mold, shoe mould, mould on shoes, mould shoes,mould in shoes Rain boots, boots, work shoes, gumboot,pvc shoe,eva shoe,p...
S-10
Categories : Injection Molds
MICRO MOLDING
Categories : Injection Molds
Micro molding is a very specialized art form, which is a kind of tooling design , manufactures small and precision plastic components with polymer-based functional devices, by increasingly dem...
Extrusion Dies Hollow Sheet
Categories : Extrusion Dies / Dies Heads
Multi-patent protected design, anti-UV, layered and colored, stable air volume adjustment, best choice of high value SUITABLE AVAILABLE FOR PP、PC
Single Valve Gate Hot Runner System
Categories : Hot Runner Systems
Dual-cylinder, powerful for gate seal. Nice gate mark. All in one, easy to install. Customize for your need.
P-10
Categories : Injection Molds