Horizontal Injection Molding Machines

EDEX TECHNOLOGY CO., LTD.

● Single, dual, triple color/resin in one machine. ● Suits for Plunger type injection or screw type injection system. ● 2-platen 4-cylinder direct clamping system. ● Patented central-radial plat...

ATOZ- Horizontal Screw Type Injection Molding Machine

EDEX TECHNOLOGY CO., LTD.

Double injection molding machine – HDC series

HUARONG PLASTIC MACHINERY CO., LTD.

The standard HDC series has two parallel horizontal injection unit to be able to produce a 2-color and 2 plastic material in a time to save time and increase the productivity. To equip Huarong&rsqu...

Toggle Outward Injection Molding Machine E Series

Plastic (toggle outward) injection molding machines are the particular design of toggle mechanism. They allow the application of the dynamic force concentrated on the centre of the moving platen, e...

Hydraulic Clamping Injection Molding Machine DHT Series

Direct hydraulic clamping injection molding machines are designed without toggle mechanisms that enable to avoid the toggle wear. This model can increase the position accuracy and is good for high ...

Toggle Inward Injection Molding Machine CNT Series

Plastic (toggle inward) injection molding machines are new invented products that have higher standards in performance, more flexibility and more efficiency than traditional. Also, in order to cate...

All Electric Machine With SPARK Series

ASIAN PLASTIC MACHINERY CO., LTD.

Features: Combining ultra-thin high speed and ultra-thick low speed Revolution round template design with Japanese super rigid frame Super high-speed intelligent computer controller With ...

5 Gallon PET Preform Injection Molding Machines & Whole Plant Turn-Key Solution

Categories : PET Preform Injection

KING’S SOLUTION CORP. acquired 18 years of 5-gallon PET preform production practice experience from KING'S MACHINERY ENGINEERING CORP. We provide the full process of Dehumidification Dryi...

Servo Energy Saving Injection Molding Machine CX-60 – CX-1600

APPLICATIONS:Packaging,Optics,Electronics,PET Preform,Closures,Cutlery,Thin Wall,Automotive

PET Preform Injection Molding Machine with 8+8 Cavity Mold

Categories : PET Preform Injection

KING’S SOLUTION CORP. acquired 18 years of 5-gallon PET preform making machine practice experience from KING'S MACHINERY ENGINEERING CORP. We provide the full process of Dehumidification ...

Two Platens Injection Molding Machine - 400MBE to 2300MBE

The actuator of the clamping force is installed on the fixed platen of the conventional two platens injection molding machine. The design of the MBE model has four sets of traveling cylinders insid...

Mixing Color Injection Molding Machine 120BS to 300BS

Several embedded injection processes on two barrels to inject two melts on different stages. Times or positions to create different layouts are found in molding parts.

Dual Platen Injection Molding Machine

ASIAN PLASTIC MACHINERY CO., LTD.

As a large tonnage injection molding machine, it can saves up to 20% of the machine floor space. (foot print) • Automatic mould adjustment saves on mould-changing time.

LIM、LSR (Liquid Silicon Rubber) Vertical Press (Rotary/Shuttle)

Categories : Rotary Table Injection Molding Machine

● Precision vertical clamping system (parallelism/ flatness : 0.02/100mm) , heavy-duty tie-bars, and low-pressure mold clamping work together to greatly extend machine & mold life. ● Increased ...

Dual / Two Color Injection Molding Machine DNT Series

Dual color injection molding machines are dual color demand with two injection units that enable to perform two color at one time and spare second processing time.

ASIAN PLASTIC MACHINERY CO., LTD.

Heavy Duty Double Toggle Injection Molding Machine

Categories : Double Toggle Injection Molding Machine

The new design has ensured maximum space between tie bars, as well as a large daylight area. The fixed and moving platens are designed in such a way that the yensure complete accuracy and precision...

Thermosetting Injection Molding Machine 90BBE to 400BBE

● EXTRA ELEMENTS FOR THERMOSET PROCESSING ● SPECIAL SCREW BARREL DESIGN FOR THERMOSET MOLDING ● THREE-STAGES HEATING COMPONENT FOR KEEPING THERMOSETS UNDER A PERFECT PLASTISIZING CONDITION

Two Platen Injection Molding Machine NRH Series

HUARONG PLASTIC MACHINERY CO., LTD.

20% ~ 30% less from machine length, compare with toggle design. Less space required from a molding facility. Less space required from a molding facility. Fully automatic mold-close adjustm...

High Speed Plastic Heel Injection Molding Machine

Categories : PET Preform Injection

● Rapid, high-precision direct hydraulic clamping system. Automatic needle loading, multistage ejection setting. ● Two adjustable nozzles with hot runners, molding 2 heels without runner in one shot.

PET Preform Injection Molding Machine Servo - 120PET to Servo 470PET

Standard L/D ratio of 24 times and above for good plasticizing quality. Application of barrier type screw features and an extra barrier ridge to ensure homogenous plasticization when melting PET. ...

Multi-Color Injection Molding Machine

Categories : Rotary Table Injection Molding Machine

Tie-bar less and big rotary design gives more space for operation. The cable hanger set up in the center of the rotary and out of the molding area, avoids any danger when workers insert the cables ...

multiplas

MULTIPLAS ENGINERY CO., LTD.

multiplas

DC Power Cord Two Ends Double VIMM With Rotary Table

Categories : Rotary Table Injection Molding Machine

• Tie-bar less and big rotary design gives more space for operation. The cable hanger set up in the center of the rotary and out of the molding area, avoids any danger when workers insert the ...

Atom- Horizontal Plunger Type Micro Injection Molding Machine