Classification : HOT RUNNER SYSTEMS
Country: Taiwan
Phone: 886-2-29997193
Fax: 886-2-29993403
Contact Person: Anny
Inquiry Now
  • This nozzle only has slight protruded vestige and very suitable for no flow mark required parts(transparent parts).
  • Due to the contactless design of nozzle bushing, there is no bushing mark on part’s surface.
  • The match between nozzle and gate in the mold is very important that can prevent the cool plug, heat losing and stringing problems. Especially, the polymer with glass fiber needs to be prevented to use this kind of nozzle.
  • Simple and easy to use.
  • According to the necessary, we can choose by using Sprue gating or Pin-point gating nozzle.
  • The sprue nozzle is the most popular type. Not only it's suitable for almost all of the plastic material but also it provides easy color change.
  • The pin-point gating nozzle: It provides good gate mark, reduction in raw materials consumption, and reduction of finishing work on molding. 
  • There are AESB, ANPR, ANPT, NL-ANPT and other specifications. 
Type ANPR 20 ANPR 30 ANPR 40 ANPR 50
Ø D1 1.8 1.8 2.0 3.0
Ø D2 9 15 16 20
Ø D3 5 7.5 10 14
Ø D4 25 32 40 45
D5 40 40 40 45
L 52~160 80~250 80~400 80~600