English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
T-Shirt Bag Making Line (JIT-45D)
Categories : Bag Making Machine by Applications
The JIT-45D is the 2-Color T-shirt Bag Making Line in JANDI'S JIT series. Rather than a stand-alone bag machine, a JIT line links blown film extrusion, printing and bag making into one in-line process, so that resin enters at one end and finished, printed T-shirt bags leave at the other without intermediate film rolls being stored and re-handled. The 45D designation identifies the two-color printing configuration of the line.The JIT series is offered in several configurations — mono-layer semi-automatic and full-automatic types, an ABA full-automatic type and the 2-color full-automatic type represented by the JIT-45D — so the line can be matched to the film structure and print requirement of the bag. Line composition, film width and output are configured with the buyer at quotation, and the specification table below lists the models in the series.Type: T-shirt bag making line, in-line blown film, printing and bag makingConfiguration: 2-Color full-automatic typeModel: JIT-45DSeries alternatives: mono-layer semi-auto, mono-layer full-auto, ABA full-auto typesLine composition and output configured at quotation
T-Shirt Bag Making Line (JIT-55)
Categories : Bag Making Machine by Applications
The JIT-55 is the mono-layer semi-automatic type in JANDI'S JIT T-shirt bag making line. A JIT line links blown film extrusion, flexographic printing and bag making into one in-line process: resin goes in at one end and printed, heat-cut T-shirt bags come out at the other, without film rolls being stored and re-handled between steps. The line is specified for biodegradable material as well as HDPE resin with filler.The in-line flexographic printer runs water-based and solvent-based inks, a bobbin change unit allows non-stop operation, and a waste recovery unit returns the die-cut scrap to the line. Compared with the two-colour full-automatic type in the same series, the JIT-55 is the semi-automatic configuration; bag size, motor size and roller width are listed in the specification table below.Type: T-shirt bag making line, in-line blown film, printing and bag makingConfiguration: mono-layer semi-automatic typeModel: JIT-55Material: biodegradable material, HDPE resin, fillerIn-line flexographic printer for water-based and solvent-based inksBobbin change unit for non-stop operationHeat-cutting type bag sealing unitWaste recovery unit for on-line reuse of die-cut scrap
Rotogravure Coating Machine Tandem Type (WRC-DT Series)
Categories : Rotogravure Coating Machines
WORLDLY's tandem type coating machine is adapting rotogravure precision coating in high speed to coat on the either wide or narrow material. it works simultaneously by connecting two machines or operate separately to acquire the uppermost productive benefit.With 6 heating chambers equipped with specially designed nozzles to help temperature stabilized as desired. Not only a LEL device and anti-explosive safety valve are there to have safety secured but also Hot air recycling system is designed to achieve 30-40% energy saving. The whole machine is controlled by PLC, in addition the temperature and the wind velocity are monitored by human-machine interface thus the production can be smooth and stable. Besides, the machine can work with vacuum metalizer to produce metalized film.
All Electric 3 Layer, Double Station Blow Moulding Machine for Plastic Bottle Making
Categories : Electric Blow Molding Machines
All Electric 3 Layer, Double Station Blow Moulding Machine for Plastic Bottle Making Energy Saving Power consumption 40~50%↓ Production output 20~25%↑ ECO No hydraulic oil, no pollution, Noise level 20dB reduced. Industry 4.0 Smart manufacturing, with SCADA system.
Patented Housing Desiccant Rotor Dehumidifying Dryer (DHML)
Categories : Dryers and Dehumidifiers
Patented Housing Desiccant Rotor Dehumidifying Dryer (DHML) 1. Unique design of insulated desiccant rotor system. 2. Efficient and energy saving design of exclusive rotation mechanism for the rotor & desiccant chambers. 3. Easy-load design for desiccant replacement. 4. No pneumatic valves necessary to control the air flow between areas. 5. Accurate PID temperature controller. 6. Ideally design for PET preform systems. 7. Intelligent Microprocessor Control and premium overheat protector 8. Energy saving heater and unique design for saving electricity. 9. Well designed Solid State Relay (SSR) and protective devices. 10. Obtained numerous domestic and oversea patents of Japan, the United States, Germany, Taiwan and China.
Hopper Dryer (HD/IHD/DHD)
Categories : Dryers and Dehumidifiers
‧ HD Series Rapid heating. Constant temperature control. ‧ IHD Series Special insulated design. Energy saving. Save against burns. ‧ DHD Series Insulated design. Dust-free, clean free. The standard DHD model is equipped with timer(T), EGO overheat protector(P),and patented magnetic stand (NSD)
HBE Series Mono/Multi-Layer Blow Moulding Machine for 20lt~25lt diamond shape jerry can
Categories : Blow Molding Machines by Layers
1.Compact Design & Competitive Price 2.High Putput& Homogenous Mixing Result 3.Fast Colour Change 4.User-Friendly Control System with Remote Control 5.High Production Effciency & Energy Saving 6.Fully Automation
Large Pipe Shredder-J Series
Categories : Crushing, Shredding & Granulating Equipment
J1200 Pipe Shredding system is designed to process plastic pipe or plastic profile with a 6-meter-long, 1200 mm diameter. Four-shaft shredding design is a leading technology in the world and an initiative origination in China. With the best cutting rotor assignment, the fours shafts form the best cutting angle. Separate motor starting design highly reduces import for the electricity network. The cutting shaft can be controlled separately, so as to bring down the running cost of the machine. Every cutting shaft owns specific features according to its location, to achieve the best cutting effect. The feeding system is equipped with a multilevel hydraulic cylinder, powered and controlled by an efficient, stable, and automatic control system. Feeding speed can be controlled for shredding different materials so that the target of energy saving can be achieved. The equipment is with a compact and reliable design. Safe checking doors and covers are designed with hydraulic opening devices for easy maintenance.
Bottle to Bottle Recycling Plant
Categories : Recycling Lines by Application
- Features of Extruder: This new extrusion system brings together the familiar superior plasticization and homogenization of a parallel twin-screw extruder with the specific advantages of the conical twin-screw system. The screw is equipped with easy changeable shear and mixing elements which allow adjusting the plasticizing exactly to each demand. Effective degassing supported by a vacuum pump removes monomers in the front of the plasticizing unit • Big intake section / very good in-feed behavior • Conical design ensures very good screw filling • Therefore, high output per screw rotation (kg/rpm) • High torque possible because of huge screw shaft diameter • Very stable pressure behavior • Excellent homogenizing offered by the co-rotating system • Excellent feeding performance • Small melt dwell time distribution inside the processing unit • Therefore low melt temperature • Therefore low energy consumption - Features of SSP In the SSP process, the PET pellets are further decontaminated and their molecular weight is increased to obtain high-quality bottle grade resin, which meets the regulations of the authorities and requirements of the packaging industry. SSP and decontamination of migrated substances are diffusion controlled processes. The main design parameters are product temperature and residence time. The solid-state polycondensation process (SSP) is required to upgrade the molecular weight of the amorphous PET pellets to high-quality bottle grade resin, which meets the regulations of the FDA and requirements of the packaging industry. • Especially suitable for small and medium enterprises in the third world countries which has no polymerization facility. • High I.V. chip downstream users • Stable performance, economic investment and high C/P value. • Long-term experience and quality control method of washing line will provide excellent and stable quality of PET flakes for continuous and stabilized feeding of pelletizing and SSP. • Energy-saving and environmental-friendly: reuse heat energy from pelleti
Co-extrusion Coating & Laminating Machine (WCL Series)
Categories : Extrusion Coating Machines
In this fast changing packaging market the multi-layer laminates demand has increased. The Co-extrusion machine allows to use two kinds resin or more by two or more extrusion units to create multi-function extrusion layers. The variety of resin after melted and go through the feed block then join into the T-die. The side screw has corrosion resistance treatment. It’s fine to work with acid copolymer resin, such as EVA, EAA, EMAA and Surlyn etc. The barrel heated by ceramic heater to ensure more energy saving and short start up time. Worldly also developed the exclusive extrusion output control system with Germany leading dosing system company. So it provides very accuracy and stable output and coating gauge control during the production. It can save more material especially for long run job. The high speed H series version of the rewinding splicer adopted with tracking roller device. It provides two kinds gap & contact winding mode and gives uniform and perfectly straight finished winding during high speed running. Also the taper tension can proper control the winding from the beginning roll. So it can reduce the wastage and avoid the wrinkle generate at the inner roll.
MIB 85-C Handled PC Water Bottle Special Machine
Categories : Injection Blow Molding Machines
It is a handled PC water bottle, and it only needs one machine to finish the process of injection and blowing. It is an integrated, one-step, and multi-function machine. Handle and bottle belong to one kind of raw material. Raw Material is easy to recycle. Same kind of raw material is easy to deal with during recycle. Save money, save space, and save energy. MIB 85-C machine not only can save energy, but also can save environmental protection. Few flash. Flash of this machine only has 2.56%.
LD/LLDPE Super High Speed Inflation Machine (GF-L85ES)
Categories : Blown Film Extruders
The GF-L85ES is the largest of the three GF-L ES super high speed blown film lines for LD and LLDPE film. It is specified for a maximum film width of 2200 mm and a maximum capacity of 240 KG/HR, using an 85 mm screw, a 100 HP driving motor and a 500 mm blown film die, with 8 ZONES of temperature control on the panel. The GF-L55ES and GF-L65ES cover the narrower widths in the same series.The tower fixed take-up unit has a 2300 mm roller width and runs at Max. 60 M/Min, and the single-station surface friction winder changes bobbins semi-automatically by pneumatic system. The same option list as the rest of the ES series applies, including stacked air ring, width control, corona treater, EPC or CPC edge control, oscillating take-up, double station winder, auto tension control, hydraulic unloading, heat-slitting, a second gusset unit, an in-line bag making or printing machine, and an edge-trim on-line re-use system for returning trim to the extruder.Material: LD/LLDPEMax. film width: 2200 mmMax. capacity: 240 KG/HRExtruder: 85 mm screw, 100 HP driving motor; 500 mm blown film dieTemperature control: 8 ZONESTake-up: tower fixed type, 2300 mm roller width, Max. 60 M/MinWinding: single station surface friction type, semi-auto pneumatic bobbin changeOptions: stacked air ring, width control, corona treater, EPC/CPC, oscillating take-up, double station winder, hydraulic unloading, heat-slitting, in-line bag making/printing, edge-trim re-use
LD/LLDPE Super High Speed Inflation Machine (GF-L65ES-1)
Categories : Blown Film Extruders
The GF-L65ES-1 belongs to the GF-L ES super high speed series for LD and LLDPE film, positioned above the standard GF-L line for wider film and higher output. In the 65 mm size the line is rated for a maximum film width of 1600 mm and a maximum capacity of 180 KG/HR, with a 65 mm screw driven by a 75 HP motor and a 350 mm blown film die. Temperature is controlled in 7 ZONES from the control panel.The take-up unit is a tower fixed type with a 1600 mm roller width and a take-up speed of Max. 60 M/Min. Winding is single station, surface friction type, with semi-automatic pneumatic bobbin change. The option list is extensive: auto loader, pressure gauge, die rotating unit, LD/LLDPE die and air ring, stacked air ring, width control, corona treater, embossing roller, air chiller, vertical or horizontal oscillating take-up, edge or center position control (EPC or CPC), manual winder with air shaft, double station winder, auto tension control, hydraulic unloading, heat-slitting, second gusset unit, in-line bag making or printing machine, edge-trim winder and an edge-trim on-line re-use system.Material: LD/LLDPEMax. film width: 1600 mmMax. capacity: 180 KG/HRExtruder: 65 mm screw, 75 HP driving motor; 350 mm blown film dieTemperature control: 7 ZONESTake-up: tower fixed type, 1600 mm roller width, Max. 60 M/MinWinding: single station surface friction type, semi-auto pneumatic bobbin changeOptions: stacked air ring, width control, corona treater, oscillating take-up, EPC/CPC, double station winder, auto tension control, in-line bag making/printing, edge-trim re-use
KET Series All Electric Injection Machine KET-40 (STANDARD)
Categories : Vertical Injection Molding Machines
Discover the power of our Vertical Injection Molding Machine, delivering low noise and high efficiency. Experience the benefits of green energy with water and power-saving features
Accumulator Head Blow Moulding Machine for Table Top
Categories : Extrusion Blow Molding Machines
Compact design with less footprint Energy saving with high/low pressure circuit ONE HMI for total operation function Remote access for support diagnosis and troubleshooting Product range up to 22kgs shot weight
Outward Toggle Type Plastic Injection Molding Machine - TWII-Series
Categories : Toggle Clamping Injection Molding Machines
Outward Toggle Clamping a Significant Increase in Structural Accuracy of Mold Platen Benefit: High Rigidity / Highly Precise Injection, Energy Saving / Customization Plasticized Applications: Preform Bottle Cap, Paint Bucket
Oven Dryer (YBO)
Categories : Dryers and Dehumidifiers
The Oven Dryer is a compact, convenient drying equipment which can dry more than one type of resin at the same. For plastics use, it can be used for annealing and product testing after molding. It can also dry electric motor and parts, electroplating, pharmaceutical, paint, printing, agricultural and food. (grain, garlic, tea, and etc.) Powerful, heated air flow system and unique air circuit are designed for evenly temperature control and the best baking quality. The oven dryer has stainless steel trays in which you can place your resins or material to be dried. Hot air recycling system is durable and energy saving. Equipped with 24-hour-timer which can be set in advance to operate the oven dryer.
Ceramic Band Heater
Categories : Heating & Thermal Control Systems
ARICO｜Customed Ceramic Band Heater Manufacturer Arico is a global customed Ceramic Band Heater manufacturer and supplier, dedicated to improving the thermal insulation, energy saving, service life, durability, ease of installation of Ceramic Band Heater. Mainly providing to India, the United States, China, Thailand, Vietnam, Israel markets at a reasonable price. Thermal insulation Conserves energy Minimum heat loss Easy installation Uniform temperature Better heater life Can be manufactured to your specification Various types of construction & terminations
Squeeze Dryer Integrated Recycling Machine
Categories : Crushing, Shredding & Granulating Equipment
Dual Function in One Unit Dual Function Within One Screw, powered By Single Motor. Significant Energy Savings Integrates two essential processes into one single machine, simplifying your workflow while saving valuable space, labor, and energy. High Efficiency with Lower Cost Effectively handles materials with over 50% moisture content from the washing line. Reduces moisture to just 1–3%, significantly improving extrusion performance. Optimized for Fluffy Materials Designed for LDPE/HDPE films, Agricultural films, and soft packaging waste.
Granulating System: Underwater Pelletizer
Categories : Pelletizing & Compounding Lines
Underwater pelletizer with advanced water cooling technology. Energy saving, Easy Operation Underwater Pelletizing System. Mainly used for plastic materials such as PP、TPU、TPR、TPE etc.
51 Inch Tire Curing Press
Categories : Rubber Curing/Vulcanizing Machines
• Equipped with servo motor for energy saving, product quality stabilization and operation efficiency. • Accurate loader and unloader mechanism with bumper function for excellent alignment. • Heating platen with special channel design for temperature uniform distribution to have the best tire quality. • Rear pneumatic inflator (option): Equipped at the rear side of the mainframe to operate in automation. After the curing process the inflation tire will be cooling and forming to prevent the body from deformation and make sure quality.
PET Fully Electricity Stretch Blow Molding Machine for Jar and Large Containers
Categories : Electric Blow Molding Machines
-Servo-motor technology (preform transfer system – preform stretching – press clamping). -Energy savings. -Quiet. -Faster cycle times. -Reduced downtime and labor. -Optional jar preform auto feed.
PP BLOWN FILM MACHINE
Categories : Blown Film Extruders
High Speed PP Blown Film Machine is suitable for producing PP bags and films. Special design of screw results in better mixing to ensure high output and good film quality. AC inverter control motor for energy saving. The water-quenched system effectively makes films glossier and more transparent, very suitable for food, flower and garment packaging. Also capable of producing multilayer films (Model: CTPP)
Servo Energy Saving Injection Molding Machine CX-60 – CX-1600
Categories : Horizontal Injection Molding Machines
APPLICATIONS:Packaging,Optics,Electronics,PET Preform,Closures,Cutlery,Thin Wall,Automotive
Vertical Two Tie-Bar Injection Molding Machine
Categories : Hydraulic Clamping Injection Molding Machines
Vertical direct hydraulic clamping system is designed for accurate, safe operation, especially suitable for insert molding. With double slide table or rotary design, put in, takeout products and molding finish at the same time, which is more safe and efficient for production, then reduce the cost of production. High precision mold platen (Parallelism/flatness:0.01/100mm), heavy duty tie bars, and low pressure mold clamping work together to greatly extend machine & mold life. Nitride and NIP/Nitroflon coated screws and barrels are long-lasting, robust and provide superior acid/alkaline resistance. Heavy duty double cylinder injection unit is maintenance friendly and free of oil leaks. All series adapted Variable pump +PQ valves enable energy savings of 30~50%. Proportional hydraulic control system provides low noise, low energy consumption, and smooth machine movements with durable life. Low oil temperature, durable parts, high speed injection, and quiet operation. Controller can record the production conditions such as temperature, pressure, flow, position available on the panel, reducing adjust of machine. All machine with compact, space-saving design, reduce the heavy burden of the floor of factory.
Vertical Single Shuttle Table Injection Machine
Categories : Vertical Injection Molding Machines
Vertical direct hydraulic clamping system is designed for accurate, safe operation, especially suitable for insert molding. With double slide table or rotary design, put in, takeout products and molding finish at the same time, which is more safe and efficient for production , then reduce the cost of production. High precision mold platen ( Parallelism / flatness : 0.02/100 mm), heavy duty tie bars, and low pressure mold clamping work together to greatly extend machine & mold life. Nitride and NIP/ Nitroflon coated screws and barrels are long-lasting, robust and provide superior acid/alkaline resistance. Heavy-duty double cylinder injection unit is maintenance friendly and free of oil leaks. All series adapted Variable pump +PQ valves enable energy savings of 30~50%. Proportional hydraulic control system provides low noise, low energy consumption, and smooth machine movements with durable life. Low oil temperature, durable parts, high speed injection, and quiet operation. Controller can record the production conditions such as temperature, pressure, flow, position available on the panel, reducing adjust of machine. All machine with compact , space-saving design, reduce the heavy burden of the floor of factory.
Vertical Shuttle Table Injection Molding Machine
Categories : Vertical Injection Molding Machines
Vertical direct hydraulic clamping system is designed for accurate, safe operation, especially suitable for insert molding. With double slide table or rotary design, put in, takeout products and molding finish at the same time, which is more safe and efficient for production , then reduce the cost of production. High precision mold platen ( Parallelism / flatness : 0.02/100 mm), heavy duty tie-bars, and low pressure mold clamping work together to greatly extend machine & mold life. Nitride and NIP/ Nitroflon coated screws and barrels are long-lasting, robust and provide superior acid/alkaline resistance. Heavy-duty double cylinder injection unit is maintenance friendly and free of oil leaks. All series adapted Variable pump +PQ valves enable energy savings of 30~50%. Proportional hydraulic control system provides low noise, low energy consumption, and smooth machine movements with durable life. Low oil temperature, durable parts, high speed injection, and quiet operation. Controller can record the production conditions such as temperature, pressure, flow, position available on the panel, reducing adjust of machine. All machine with compact , space-saving design, reduce the heavy burden of the floor of factory.
Custom Vertical LIM LSR Injection Moulding Machine
Categories : Vertical Injection Molding Machines
Precision vertical clamping system (parallelism/ flatness : 0.02/100mm) , heavy-duty tie-bars, and low-pressure mold clamping work together to greatly extend machine & mold life. Increased productivity and efficiency with shuttle table or rotary table configuration. Pick and place products while another product finsihes molding. Energy savings of around 50-70% with servo pump power system. Safety cover, Light curtain, pneumatic door and dual palm safety button for personnel safeguard. Multi-Language PC Base industrial type Linux core system. 1000 sets of mold settings can be stored and export as backup. Complete record of history settings & warnings. Built in USB connect. On-line remote control and maintenance service.
Vertical 4-TIE BAR Injection Machine
Categories : Hydraulic Clamping Injection Molding Machines
Vertical direct hydraulic clamping system is designed for accurate, safe operation, especially suitable for insert molding. With double slide table or rotary design, put in, takeout products and molding finish at the same time, which is more safe and efficient for production , then reduce the cost of production. High precision mold platen ( Parallelism / flatness : 0.01/100 mm), heavy duty tie bars, and low pressure mold clamping work together to greatly extend machine & mold life. Nitride and NIP/ Nitroflon coated screws and barrels are long-lasting, robust and provide superior acid/alkaline resistance. Heavy-duty double cylinder injection unit is maintenance friendly and free of oil leaks. All series adapted Variable pump +PQ valves enable energy savings of 30~50%. Proportional hydraulic control system provides low noise, low energy consumption, and smooth machine movements with durable life. Low oil temperature, durable parts, high speed injection, and quiet operation. Controller can record the production conditions such as temperature, pressure, flow, position available on the panel, reducing adjust of machine. All machine with compact , space-saving design, reduce the heavy burden of the floor of factory.
C Type Injection Molding Machine
Categories : Vertical Injection Molding Machines
Tie-bar less (C type) design gives more space for operation. Especially suitable for the power cord and connector with wire. With double slide table or rotary design, put in, takeout products and molding finish at the same time, which is more safe and efficient for production , thus reduce the cost of production. High precision mold platen ( Parallelism/ flatness : 0.01/100 mm), heavy duty tie bars, and low pressure mold clamping work together to greatly extend machine & mold life. Nitrite and NIP/ Nitroflon coated screws and barrels are long-lasting, robust and provide superior acid/alkaline resistance. Heavy-duty double cylinder injection unit is maintenance friendly and free of oil leaks. All series adapted Variable pump +PQ valves enable energy savings of 30~50%. Proportional hydraulic control system provides low noise, low energy consumption, and smooth machine movements with durable life. Low oil temperature, durable parts, high speed injection, and quiet operation. Controller can record the production conditions such as temperature, pressure, flow, position available on the panel, reducing adjust of machine. All machine with compact , space-saving design, resolve the floor space shortage problem of factory. Material injected through parting line to cavities.
Hybrid Type Extrusion Blow Molding Machine
Categories : Electric Blow Molding Machines
In order to satisfy the purchase demand for power-saving and durable blow molding machine, Chia Ming researches and develops energy saving and practical servo hydraulic electric series (hybrid blow molding machine). It has characteristics of speedy positioning, accuracy and energy saving of the fully electric type, and also keeps the characteristics of high thrust of hydraulic oil structure. Also, the cost is lower than fully electric types while keeping the same characteristics.
Fully Electric Extrusion Blow Molding Machine - Dual Diehead & Single Station
Categories : Horizontal Blow Molding Machines
Full electric movement, energy saving 15%~40%. Fully Electric Extrusion Blow Molding Machine - Dual Diehead & Single Station
Continuous Extrusion Blow Molding Machine-Single Station
Categories : Electric Blow Molding Machines
Energy Saving. Using one hybrid servo motor to control all machine actions. Power consumption is less than a general hydraulic machine by 20~45%, easy to reach energy saving and carbon reduction goals. Servo Hydraulic and Electric Power System: Accords actual operation condition to carry on the automatic velocity modulation, reduces the energy loss of auxiliary construction section greatly, and tallies with recent modern energy conserving and environmental protection. Reduces the system response time, and reaches the quality requirement of high accuracy products.
Toggle Energy Saving Injection Molding Machine Servo 90E to Servo 570E
Categories : Horizontal Injection Molding Machines
● Effective Energy Saving Unit ● Outstanding Hydraulics ● ASE Servo Pump
JN Series-Single Station
Categories : Automatic Blow Molding Machines
●Hydraulic type Automatic Blow Molding Machine. ●Automatic production design. ●Heavy-Duty clamping structure design. ●Mold Open/Close/Move by precision linear guide and finished bottles come out in line for next process. ●Gearbox drive extruder directly. ●Scraps centralize management. ●PLC control with Touch Screen for time, pressure, flow,...etc. ●Diversified parison knifes and multihead choices depend on the requirement. ●Energy saving system for hydraulic system.
PET Preform Neck Crystallization Machine - CR Series
Categories : Crystallizing Machines
● Economic and energy saving, compare with other crystallized machine help save energy. ● Through star wheel, stable and smooth to transport system.
PET Stretch Blow Molding Machine - TEM08SH2
Categories : Automatic Blow Molding Machines
Economic and energy saving compare with other crystallized machines.It can save up to 50% of energy. Through star wheel, stable and smooth to transport system.
Circular Loom (Light Duty Fabrics)
Categories : Industrial Knitting Machines
The simplicity and energy saving design of circular looms have led to high efficiency performance with stable quality of weaving.
JN Series-Double Station
Categories : Automatic Blow Molding Machines
●Hydraulic type Automatic Blow Molding Machine. ●Automatic production design. ●Heavy-Duty clamping structure design. ●Mold Open/Close/Move by precision linear guide and finished bottles come out in line for next process. ●Gearbox drive extruder directly. ●Scraps centralize management. ●PLC control with Touch Screen for time, pressure, flow,...etc. ●Diversified parison knifes and multihead choices depend on the requirement. ●Energy saving system for hydraulic system.
Millad® NX™ 8000
Categories : Additives
Millad NX 8000 helps PP producers and converters to stay ahead of packaging, appliances, medical, houseware and food storage trends by achieving unprecedented transparency in polypropylene. This innovative clarifier creates exciting new opportunities for your products, including significant energy savings and faster production in injection molding. Suitable for all conversion processes, Millad NX 8000 makes polypropylene a viable alternative to glass or amorphous polymers like PC, PET, PVC and PS. PP clarified with Millad NX 8000, known in the market as NX UltraClear PP, answers the growing demand for clear, attractive products and sustainable, cost-efficient production.
Hydraulic Servo Energy Saving System
Categories : Control Equipment / Systems
Pioneer products that lead the plastics machinery industry to energy-saving, green-environmental protection.
All Electric Machine With SPARK Series
Categories : Automatic Injection Molding Machine
Features: Combining ultra-thin high speed and ultra-thick low speed Revolution round template design with Japanese super rigid frame Super high-speed intelligent computer controller With Japanese screw design, excellent performance All-electric machine vs. Hydraulic machine More environmentally friendly → Reduce the configuration of cooling water circulation system More energy saving → No need high-watt electric source. More environmental cleanness → No oil leakage concern and no hydraulic oil consumption. More quiet → No high speed sound driven by oil pump. Easier to execute the machine compounding action → difficult for hydraulic machines. More sensitive for mold low pressure protection → avoid damage to mold.
HX Series-100/200/300
Categories : Automation, Robotics & Software
Energy saving, light design, and the special selection of raw materials reduce the energy consumption of the operation.
PET Preform Neck Crystallization Machine - CR6K
Categories : Crystallizing Machines
Economic and energy saving compare with other crystallized machines.It can save up to 50% of energy. Through star wheel, stable and smooth to transport system.
Screen Changer
Categories : Separating & Filtration Equipment
HYDRAULIC SLIDE PLATE Hydraulic system, easy for operation. Optional guard cover to provide highest safety operation. Materials : most polymer. Application : for extrusion products such as sheet and films. Hydraulic system, easy for operation. NON-STOP SLIDE PLATE Streamline and smooth channel for easy clean and little polymer stagnation. Interruption free and few bubbles caused by filter replacement. Hydraulic system with nitrogen accumulator for easy and fast operation. Fast slide plate movement for non-stop production. Materials : most polymer. Application : for extrusion products such as opitical, sheet and films. DUAL SLIDE PLATE Continuous production process. Interruption free filter replacement. Hydraulic system is driven by solenoid valve for easy operation. Optional guard cover to provide highest safety operation. Materials : most polymer. Application : suitable for sheet products. DUAL PISTON Continuous production process, air does not enter the production process. Interruption free by filter replacement. Hydraulic system is driven by solenoid valve for easy operation. Optional auto-venting system. Can be equipped with a fully automatic exhaust. Optional guard cover to provide highest safety operation. Materials : most polymer. Application : suitable for optical, sheet, film and other products. LARGE FILTRATION Continuous production process. Special venting design that no air enter the process during screen changing. Hydraulic system is driven by solenoid valve for easy operation. Optional auto-venting system.Can be equipped with a fully automatic exhaust. Can be equipped with a fully automatic exhaust. The filter area is about 2~5 times larger than the Dual Piston. Optional guard cover to provide highest safety operation. Materials : most polymer. Application : suitable for granulation, sheet, film and other products. BACK-FLUSH Interruption free filter replacement. Low pressure difference for stable and continuous production during filter replacement. Maintain 75% filtering area during filter replacement and backwash. Safety cover design improves operator safety. Automatic backwash and exhaust function for cutting filter replacement loss, operating requirements and scrap reduction. High wear-resistance, high pressure resistance, high-precision filter design provides effective filtering area and filter quality. Materials : most polymer. Application : suitable for recycle, granulation, packing tape and film. MANUAL WITH LEVER GEAR Easy operation with lever gear. Energy saving without driven system. Easy to clean when changing materials or colors frequently. Machine shutdown before filter replacement. Machine shutdown before filter replacement. Application : usually applied on sheet line, blow line and lab machine. SELF-CLEANING FILTER Interruption free filter replacement. Large filtering area, applicable with a larger mesh count. Manual back wash. Energy saving without driven system. Materials : most polymer. Application : usually applied on sheet , lamination and film line. CANDLE TYPE Compact mechanical design for higher mesh count to extend filter time. Manual network change, no hydraulic system. Adjustable pressure control during production to increase the effect of mixing in the screw. Application : applied on Lamination and film line.
