English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
Food Grade PET Bottle Recycling Line
Categories : Recycling Lines by Application
The food-grade PET bottle recycling line is mainly used for PET bottle-to-bottle project (FDA Approval), which recycles post-consumer PET bottles into rPET flakes. The regenerative PET flakes conform to the quality index requirements of downstream food packaging and are used for bottle blowing and packaging which can directly contact food after pelletizing and SSP processes in the late stage. The food-grade PET bottle recycling process is more complicated than normal PET recycling, and the requirement for equipment and the quality of the final rPET flakes are more strict. At the same time, the owner is required for higher factory management and advanced production knowhow. BoReTech food-grade washing line has higher automation to avoid human errors. Ultra-cleaning of PET bottles and flakes, efficient blending, and an online inspection system to ensure that the output of recycled PET flakes meets the standard of food-grade PET bottle-to-bottle process (FDA Approval). Meanwhile, the BoReTech food-grade PET bottle recycling system process is optimized according to the post-consumer PET bottle condition from different countries with the economic cost, less space occupation, and the most advanced process technology to meet the variety of downstream production applications. With more than 20 years of experience in PET bottle recycling production, BoReTech provides online production and process guidance to customers. BoReTech PET bottle recycling system adopts a SCADA system combined with a PLC controller, which can display parameter data of each unit and single equipment intuitively and effectively, and at the same time the system can record all production data, and it has combined the remote communication technology to allow communication between customers and BoReTech engineers by the internet and give them real-time guidance. BoReTech can assist customers with practical production management, data analysis, and equipment daily maintenance. In addition, the entire PET bottle system is equipped with an optical bottle sorter and flake sorter, which greatly reduces the investment of labor and improves production efficiency, thereby truly achieves a highly automated and clean recycling system. PET bottle bales are sorted, crushed, and washed by the food-grade PET bottle washing line, and finally generated high-quality rPET flakes. A number of well-known customers of BoReTech have obtained FDA approval of rPET flakes and supply these PET flakes to downstream brand beverage manufacturers. BoReTech analyses post-consumer PET bottles from various countries and is developing a short (compact)-process PET bottle recycling system for these post-consumer PET bottles in specific countries and regions. The developing system integrates multiple functions of a single machine and greatly reduces space occupation and investment. rPET flakes recycled by compact line can also meet the requirement of the food-grade application and micro-denier filament grade applications. It will be launched at the end of 2020. BoReTech provides equipment and engineering service of PET bottle-to-bottle plant, please refer to https://www.bo-re-tech.com/en/solution/PET-Bottle-to-Bottle-Recycling-Plant.html
Foaming Injection Molding system
Categories : Shoe Sole Making Machines
Under the drive of lightweight and environmental awareness, using new technologies to reduce the product weight and the impact on environment has received increasing attention. “Foaming injection molding” application is one of the important developments. The technology of physical foaming is becoming mature enough to replace chemical foaming, which can achieve the ideal results by adjusting the process parameters, and at the same time, it can also solve the problem of sink mark caused by uneven foam cell size.
Flower Bag Making Machine
Categories : Plastic Bag Making Machines
The MGA-22-900 flower bag making machine produces the tapered, asymmetric bags used to wrap bouquets and single-stem flowers for retail display, as well as grape bags on the same platform. The machine runs fully automatically from raw film to finished bag, reducing labor cost and raising production output. A synchronized punching mold and heat sealing device keep bag size uniform, produce a neat sealing line, and reduce waste. Precision, durable punching molds with a low breakdown rate work with a servo motor and digital length-control unit for precise punching position, while an automatic alarm stop protects the machine and prevents material waste if something unusual occurs during operation. The sealing equipment's design supports different data pocket specifications and types for a wide range of applications. Model: MGA-22-900 Feed material: BOPP, CPP Effective length: 400 - 700 mm Effective upper width: 230 - 650 mm Effective lower width: 100 - 200 mm Effective upper width + lower width: Max. 750 mm Output: 30 - 45 cycle/min (one cycle is 2 pcs)
Corona Electrostatic Treater
Categories : Non Woven Production Line
This CORONA ELECTROSTATIC TREATER is used to turn materials such as melt-blown fabric (face mask sheet),non-woven fabric (non-woven sheet) and polymers into electrets. The equipment includes a high-frequency inverter power supply, special electrodes and rollers. Through the mutual control of these components, the electret material can deeply capture the charge energy, and maintaining the polarization for a long period. This equipment can be used for application such as turning melt-blown fabric, non-woven fabric (non-woven fabric) and air filter into electret. It greatly increases the filtration efficiency of the filter material by capturing tiny particle which is smaller than filter density. More importantly, this CORONA ELECTROSTATIC TREATER helps melt blown fabric increase 45~65% of filtration efficiency and turns it to the most important layer for medical face mask such as N95, KN95 etc. to reduce infected by corona virus COVID-19. Note: An electret is a material that almost remains electric polarization permanently and is able to generate an electric field in the surrounding area. The electret strength will last longer when corona electrostatic charges deeply by high voltage and frequency.
Five-Layer Co-Extrusion Blown Film Machine
Categories : Blown Film Extruders Lines
Wide-Width Five-Layer Blown Film Solution for Water Bags and General Packaging KS-ML5-50-65-75-65-50 The KS-ML5-50-65-75-65-50 Five-Layer Co-Extrusion Blown Film Machine is a high-stability blown film line developed by KUNG HSING Plastic Machinery for water bag and general packaging film applications. Designed with LLDPE as the primary material (approximately 65–75%), this five-layer system integrates efficient cooling, precise gravimetric control, and stable take-up and winding systems to deliver consistent film quality in wide-width, medium-to-high output production.
3 Layer Co Extrusion Blown Film Machine
Categories : Blown Film Extruders Lines
Application for greenhouse sheet, agricultural films, construction sheets, food packaging, sacks, shrink films, shrink hood films, and more. Max. film width of up to 4.2 m (8.4 m for single-layer-opened films) It supports a wide range of raw materials such as HDPE, LDPE, LLDPE, EVA, MPE, PP, and others. The machine is equipped with three sets of gearboxes and motors for independent control. Optionally, a 360º Oscillating Nip roller device can be added to ensure uniform film thickness and improve the performance of the rotary die device. The machine can be equipped with a "Waste Film Recycling Machine" which enables direct feeding of waste film into the screw, eliminating any waste plastic film and reducing costs. Please note that the models shown here are not exhaustive. If you require larger extruders, please feel free to contact us.
4.2M Wide 2-Layer Co-Extrusion Blown Film Machine
Categories : Blown Film Extruders Lines
The extruder size configuration can be customized based on production needs, including asymmetrical configurations such as 90+120 or other combinations. Application of 2-layer film: Agricultural Film, Mulch Film, Laminating Film, Courier Bag, Frozen Package, etc. Equipped with two independent gearboxes, dual motors, two extruders, and two separate control systems. The fully automatic winder enables automatic roll change and cutting, improving automation and saving operator time. The rotary die ensures more uniform film thickness. Maximum film width reaches up to 4.2 meters, and when slit and opened on one side, it can reach up to 8.4 meters. The specifications listed below do not represent all available models. Please contact us for larger blown film machines.
5 Layer Co Extrusion Blown Film Machine
Categories : Blown Film Extruders Lines
CHYIYANG specializes in manufacturing 5-Layer Co-Extrusion machinery, which is utilized for producing uniform films used in various applications such as food and milk packaging, shrink film, shrink hood film, self-adhesive films and more. Our machinery is equipped with a bi-metal screw and a precision die. With over 50 years of experience in the field of Co-Extrusion, we ensure high-quality results.
7 Layer Co Extrusion Blown Film Machine
Categories : Blown Film Extruders Lines
CHYIYANG specializes in manufacturing 7-Layer Co-Extrusion machinery, which is utilized for producing uniform films used in various applications such as food and milk packaging, shrink film, shrink hood film, self-adhesive films and more. Our machinery is equipped with a bi-metal screw and a precision die. With over 50 years of experience in the field of Co-Extrusion, we ensure high-quality results.
Tube Filling & Sealing Machine (Heater Type)
Categories : Tube Filling & Sealing Machines
Filling & Sealing Machine (Heater Type) Main motor: 1 HP with inverter. Hopper capacity: 60 L Filling speed: 20~40 pcs/mm Filling capacity: 3~200 gm Tube dia range: Ø19~60 mm Tube length: 50~200 mm Heater: 1.5 kw Power consumption: 2.7 kw Funnel capacity: 70 liters with agitator Rotation type, sealing, date & lot number one time marking. Machine size: 950 x 800 x 2200 mm Total net weight: approx. 1100 kg
Single Screw Feeder-PSA
Categories : Dosing, Measuring & Mixing Equipment
The PSA series single-screw feeder was developed by Sino-Alloy Machinery as an important accessory to their extruder line. Its design is based on Sino-Alloy’s years of experience. The PSA single-screw feeder has a large feeding screw chamber for a smooth flow of the feeding material. Options include standard double-flight, single-flight, T-type, and spring type screws, which can be swapped easily and quickly to match the feeding material. The advantages of the intermeshed type of screw pairs are powerful displacement right-angle conveying, self-cleaning of the screws, high feed volume, and stable feeding. Sino-Alloy can also tailor the design of the feeder to match extruders from other manufacturers. Customers can also specify options such as premix, vibrate, preheat or cooling to suit production demands.
Twin Screws PET Strapping Band Extrusion Line
Categories : Filament, Yarn & Tape Extrusion Lines
Advance Extruder Design For PET Strapping Band Industry. High Quality&Stability Finish Products. User Friendly Operation. Save Energy For Drying The PET Flake.
