English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
PS Foam Plank (XPS) Extrusion Line
Categories : Foam Production & Processing Machines
Excellent thermal insulation Very low water & humidity absorbance Very high compression strength Very high mechanical resistance Stability of dimension Homogeneous density Easy to transport, cut & apply And many more
Twin Screw Roller (TSR) Head Extruder
Categories : Rubber Mixing & Pre-Processing Equipment
MACHINE FUNCTION: The Twin Taper Screws Roller Head Extruder consists of two tapered screws and two rollers,The machine is normally applied for processing to a dispersion kneader or an intensive mixer. The rubber material,mixed by a dispersion kneader or an intensive mixer,is then fed to the rollers through the two tapered screws.It calenders the material to a desired sheet form at a constant speed. The machine is designed and engineered for high speed sheet forming operations
SPX 5-Series
Categories : Sensing, Monitoring & Inspection Equipment
■ 4-2 0mA loop-powered output ■ Improved accuracy with Dynalarity ±0.2% available ■ Wide selection of pressure ranges available ■ Turndown 3:1 ■ Configurations available for use in hazardous locations ■ Remotely configurable via HARTTM ■ Precise, repeatable pressure measurements ■ Output supplied directly to DSC or PLC ■ Meets CE requirements ■ CE ATEX Intrinsically Safe Approved ■ FM Explosion Proof Approved ■ CSA Explosion Proof Approved ■ SIL 2 Certified (Pressure Output)
Embossing Machine - REF-B150 Series
Categories : Embossing Machines
Application and Materials: Paper laminate, Metalized Paper, Aluminum Foil + Paper
Electronic Vacuum Regulator (0~ -101kpa)
Categories : Sensing, Monitoring & Inspection Equipment
Product Serial: KaoLu's QKL-B3V electronic vacuum regulator is a type of inline vacuum regulator (Operating schematic diagram below). One port is connected to a vacuum source, and the other port is connected to a chamber. The precision vacuum regulator works electronically to regulate the highest level of uniform vacuum pressure despite various input conditions. The vacuum level is directly linearly proportional to the electronic command signal to the vacuum pressure controller. When 0-10V corresponds to 0 to (–)14 psig, a 5VDc command signal to the digital vacuum regulator will create a (-)7 psig vacuum pressure. The flow rate of QKL-B3V electronic vacuum regulator valve is 640 L/min. Should a higher flow rate is required, it is possible to couple a volume booster to the negative pressure regulator. QKL-B3V digital vacuum regulator allows user to regulate vacuum level via analog or digital control signal. The regulator is not self-relief, meaning that it does not exhaust excess air to reach target vacuum level. The monitor output is available either as analog output or switch output. QKL-B3V operates in dual solenoid valve principle with a closed loop electronic control. The internal negative pressure transducer monitors the vacuum level and controls the operation of the inlet and the outlet solenoid valve of the vacuum pressure regulator valve. With this special design, QKL-B3V electronic vacuum control regulator can be installed inline in any orientation, offering high flow rate, high accuracy, and high repeatability. Our vacuum pressure controller has the advantage of digital communication, which allows users to calibrate and monitor regulator status remotely. As for ingress protection, QKL-B3V digital vacuum regulator is compliant to IP65, and the M12 cable connection allows user to easily install and dismount from inline operation. QKL-B3V electronic vacuum regulator has been used in applications such as thermoforming, leak testing, tube extrusion, and tank blanketing. In order to control the both inlet and outlet pressure that allows massive air pressure into and out of the system, the user can utilize the vacuum flow regulator. Please consult our factory for further information. KaoLu also offers other types of vacuum regulator to control vacuum level in a chamber. Please refer to our FC series vacuum breaker applications. https://www.genndih.com/proportional-flow-control-valve.htm
Electronic Pressure Regulator (0-100bar)
Categories : Sensing, Monitoring & Inspection Equipment
Product Serial: KPR-200 KPR200 serves flow control up to 300 l/min. The large control range from 0 to 70 bar overpressure of this regulator facilitates abroad spectrum of applications.
APV Electronic Pinch Valve
Categories : Valves & Manifolds
Product Serial: APV APV Series Miniature Pinch Valve is a solenoid operated device that is designed to open and close tubes for controlling flow of liquids and gases. Other valve types have internal passages that may cause small amounts of fluid to remain in the valve. Pinch valves have no areas or dead volume where fluid can become trapped. Only the inside of the tubing contacts the fluid. Energizing the solenoid retracts or attracts the plunger, which opens or closes the tube. De-energizing the solenoid will allow the plunger to return to its original state. Common industries that use pinch valves for the benefits of isolating fluid from a mechanical valve include: drug dispensing, laboratory equipment, waste water, medical devices, chemical, food and beverage equipment, ceramic/glass/plastic, and bulk and solids handling.
POC Double Shaft Type Electromagnetic Powder Clutch
Categories : Transmission, Motors & Drive Systems and Gears
The HELISTAR POC series is a double shaft type electromagnetic powder clutch designed for applications that demand high-precision torque control and continuous stability. It generates torque proportional to the excitation current by utilizing a super-alloy magnetic powder. POC clutches are the ideal solution for mechanical systems requiring smooth soft starting, continuous slip, or precise positioning, commonly used in winding/unwinding processes.
Dual-Piston Filter
Categories : Recycled Plastic Pelletizing Lines
Bigger Filtration Area, Less Frequent Mesh Change Compared to the slide type product, the dual-piston filters have a larger filtration area which reduces the frequency of changing the mesh and the labor cost. Non-Stop Dual-Piston Filter The dual-piston filter is made in a continuous style with two filter flows. There is at least one filter working when the screen is changing. The piston moves slowly when the mesh is changed. This allows the melted polymer to be filled in the filter area gradually to ensure low fluctuation of the extrusion pressure. GENIUS
Dual-Die High-Speed Blown Film Machine
Categories : Blown Film Extruders Lines
Dual Die Design × Stable Speed × High-Efficiency Bag Production Solution The KS-E55S Dual-Die High-Speed Blown Film Machine is a high-efficiency production line developed by KUNG HSING Plastic Machinery for general packaging bag applications. Featuring a dual die head configuration, the KS-E55S significantly increases total output while maintaining a stable production speed. This design allows manufacturers to meet production targets without pushing a single die to extreme speeds—ensuring smoother operation and reducing operator pressure on the shop floor. By distributing output across two die heads, the machine delivers high productivity with stable line speed, enabling operators to work efficiently without being overwhelmed during winding and downstream processes.
Dry Laminating Machine (WDL Series)
In response to the mass demand of various materials and multiple methods in flexible packing markets, WORLDLY provides the WDL multiple functional drying laminating machineries as the ultimate solution. With this machine automatic taper tension settings can also be easily adjusted on the panel according to different technology process applications. Drying temperature is adjusted by PID automatic temperature controller that balances the required temperature. Internal transition rollers in the drying tunnel are connected together with belt and transmitted by an independent AC motor. In addition, to insure smooth and solid firm laminating results, the machines laminating unit uses a three roller design. The counter-roll pulled by pneumatic pistons, and adjustable from both sides to stiffen the rider roll. With these specific designs on the WDL, provided is increases production and minimize loss which are essential for flexible packaging.
Doctoring Machine - REF-Q Series
Categories : Inspection Machines
Application and Materials: PVC shrinkable label tube