PRM-TAIWAN
Classification : Injection Robot
Country: China
Phone: 86-769-83180326 (237)
Fax: 86-769-83180329
Contact Person: Kathy Zeng
Inquiry Now
Fast speed, high efficiency, low noise, long life, economical molding industry, the most economical choice, multiple patent approvals, Phoenix series, 30-280 tons of various horizontal injection molding machines, used to remove finished products and nozzles. The model has 450/650/850 , the upper and lower arms are single-cut and double-cut; the upper and lower strokes are from 350-950mm, which are dedicated to two-plate molds; the single function is used for the water-clamping port, and the full function can be used to clamp the nozzle or simultaneously clamp the nozzle and suck. Finished product; claw-rotating mechanism, can rotate the finished product 90 degrees. The installation of this robotic arm can increase productivity, reduce product defect rate, ensure operator safety, reduce manual, precise control of production, and reduce waste.

P□□□□WV
Model: 450/650/850
W: double cut
V: Full-featured, including vacuum generator and standard suction cup fixture. The air consumption of this model already includes suction function.


General specifications


power supply
Power Source



Power supply capacity (KVA)
Power Capacity



working pressure
Working Pressure



Maximum allowable air pressure
Max.Allowed Pressure



Drive mode
Drive System



1ΦAC 220V±20V
50/60HZ


0.2


5kgf/cm2
0.49Mpa



8Kgf/cm2
0.8Mpa


Pneumatic Cylinder


Main specifications

Model

P450V

P650V/WV/IDV

P850WV

Applicable molding machine (ton)

30-60

50-160

160-300

Up and down stroke (mm)

450

650

850

Drawing stroke (mm)

75

120

200

Swing angle (degrees)

60-90

Take time (sec)

1.3

1.7

1.9

Maximum load (Kg)

2

2

2

Full cycle time (sec)

4.0

4.5

5.8

Air Consumption

(NL/cycle)

11

14

14

Net Weight(kg)

27

30

41

* Due to continuous improvement of the model, the appearance and specifications are subject to change without notice.