English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
FILM/BAGS WASTE PLASTIC RECYCLING MACHINE: KCR-65
Categories : Recycling Lines by Application
The KCR-65 is a film/bag waste plastic recycling machine that crushes and reprocesses HDPE, LDPE, and LLDPE film or bags, converting the waste into pellets at an output of 35-50 kgs / hr.A 15 HP crusher and 2 HP spiral-type hopper feeding device convey the material into a single-degasification Ø 65 mm screw with a 24:1 L/D ratio, heated at 13.5 kw across 3 auto thermo zones and driven by an AC 20 hp inverter motor. The melt passes through a spaghetti-type die (3.5 kw heater, 1 zone) with a manual screen changer, then a water-cooling system and a pellet cutter with a 1 HP cutting machine motor and 3 HP cutter motor.Model: KCR-65Suitable material: HDPE/LDPE/LLDPEOutput: 35-50 kgs / hrCrusher: 15 HPScrew diameter: Ø 65 mm, L/D ratio 24:1Heating capacity: 13.5 kw, 3 zoneDriving motor: AC 20 hp + InverterDie type: Spaghetti TypeCooling system: Water Cooling
RAS UP 800
Categories : Recycling Lines by Application
FIMIC’s latest innovations are aimed to address the current challenges in the plastics recycling industry. RAS 800 is the new addition to the automatic self-cleaning melt filters models produced by FIMIC, its increased filtration surface (4775cm2) allows recyclers to reach a higher hourly production capacity with the efficiency and simplicity characteristic of FIMIC’s filtration technology.
Automatic self-cleaning screen changer - RAS
Categories : Recycling Lines by Application
Any contamination the filter collects is scraped from its surface by two blades, and then gathered by the blade-holder. Finally, anything harvested is automatically ejected through the front valve. Another important feature is the possibility to determine a pressure set-point (in pressure mode) with nothing more than a few taps on the touch screen, so that once such level is reached the blade holder (running at adjustable speed) will proceed to gather the contamination, opening the front valve only on a full cycle. In the event of a particularly contaminated input material, the filter cant be set to work in continuous mode: the blade holder will keep on scraping, while relying on temporized valve openings to discharge as needed. FIMIC- Screen changers Filters Filter Recycle filter Recycle filters Recycling Filter
Automatic Melt Filter - RAS+REF
Categories : Pelletizing & Compounding Lines
The melt filter that made FIMIC technology renowned in the recycling field, enhanced with the possibility to work in backflush. RAS+REF melt filters can in fact operate in two different ways: in scraping mode or in backflush mode, providing more options to anyone wishing to process materials with mesh filters. REF therefore represents an ideal option for mesh processing with exceptional final results. FIMIC - Screen changers Filters Filter Recycle filter Recycle filters Recycling Filter
EXCLUSIVE MELT FILTER- GEM
Categories : Pelletizing & Compounding Lines
Differently from RAS, this model reaches a greater filtering surface due to the presence of two filtering meshes towards which all the melt is directed, alongside two scrapers and independent discharge valves. The two blades scrape the contamination the filter collects, while the blade holder rakes it in to automatically eject it through the valve. The pressure mode can be set from the touch screen, while the blade holder rotating speed is adjustable and the valve only opens on a full cycle. In the event of a higher degree of contamination, a continuous mode is available to let the blade holder scrape continuously. In this case, a temporizer will tell the valve when to discharge. FIMIC- Screen changers Filters Filter Recycle filter Recycle filters Recycling Filter
Automatic DOUBLE FILTER- ERA
Categories : Pelletizing & Compounding Lines
ERA is made of two internal filtration chambers and two independent discharge valves, thus enabling to setup a pre-filtration on the first step and a finer one in the second, all in the same machine! This means, in short, the possibility of using cheap punched screens (400-2000 micron) to protect the expensive laser screens (100-300 micron) coming afterwards. The resulting cost reduction is undeniable, both on the financial and energetic side. FIMIC screen changers Filters Filter Recycle filter Recycle filters Recycling Filter
AUTOMATIC MELT FILTER- TEN
Categories : Pelletizing & Compounding Lines
TEN is FIMIC’s automatic screen changer capable of blocking even the smallest contamination particles thanks to its mesh, whose resistance allows to adapt the temperature according to the requirements and the material to be processed. The adjustable opening on the mesh output is a further guarantee of the quality of the end product. A small scraper close to the mesh harvests most waste and prevents it from breaking when it is changed. Its 1.465 cm2 filtering surface has a low load pressure; it therefore excludes any danger of degradation. It is also possible to adjust the mesh changing speed, setting a target pressure at which it will be automatically switched, to fit all the workflow to the material to be filtered. Furthermore, when changed the mesh is held by the material pressure itself and doesn’t needany other auxiliary systems. The mesh proper is available in varying filtration levels, starting from 80 micron / 170 mesh. TEN can also be adapted to finer filtration levels equipping custom made meshes. Quick opening is also always guaranteed. There’s no need for dedicated tools or skills, for FIMIC provides a pneumatic screwdriver at the time of purchase. FIMIC - Screen changers Filters Filter Recycle filter Recycle filters Recycling Filter
P.P. Film Inflation Machine (GF-P65)
Categories : Blown Film Extruders
The GF-P65 is a P.P. (polypropylene) tubular film inflation machine, a blown film line adapted for polypropylene, which needs a sizing and cooling arrangement different from polyethylene film. It is one of four sizes in the GF-P series, from the GF-P45 to the GF-P75, and is specified for a maximum film width of 800 mm with a 65 mm extruder driven by a 30 HP motor with inverter, a 350 mm die with a single lip air ring, a 2 HP inverter-controlled blower, 5 PCES of sizing ring and a hot air type drying system. Maximum capacity is 80 kg/hr. Control is from an independent switch board and the roller width is 900 mm. Options include an auto loader, hopper dryer, manual screen changer, pressure gauge, die rotating unit, corona treater, static eliminator, 4-spindle winder, air shaft and water chiller, so the machine can be built up for printed or multi-roll production of PP tubular film. Type: P.P. tubular film inflation machine Material: P.P. (Polypropylene) Max. film width: 800 mm Extruder: 65 mm, 30 HP motor with inverter Die: 350 mm with single lip air ring; blower 2 HP with inverter; sizing ring 5 PCES; hot air type drying system Max. capacity: 80 kg/hr; roller width 900 mm Options: auto loader, hopper dryer, manual screen changer, die rotating unit, corona treater, static eliminator, 4-spindle winder, air shaft, water chiller
Water Cooling Type Plastic Film Recycling Machine (GSR-100)
Categories : Recycling Lines by Application
The GSR-100 is the 100 mm size in JANDI'S GSR water cooling type plastic film recycling series for HD, LD and LLDPE and P.P. scrap. A spiral feeder delivers film into the 100 mm extruder, which is driven by a 60 HP motor; the melt passes a screen changer driven by an A.C. motor with reducer and leaves through a spaghetti type die head into a stainless steel water tank, where the strands are cooled before being blown dry and pelletized by a rotary cutter with fixed blade. Maximum capacity is 190KG/ HR. The GSR-100 sits between the GSR-85 and GSR-120 in a series of six sizes, from the GSR-45 with a 45 mm extruder and 15 HP motor to the GSR-150 with a 150 mm extruder and 100 HP motor. Control is from an independent switch board. The option list is shared across the series: conveyor with metal detector, crusher, screw conveyor, vacuum pump, pressure gauge, hydraulic screen changer, second extruder, vibrating screen, and air blower with storage tank. Type: water cooling (spaghetti type) plastic film recycling machine Material: HD/LD/LLDPE & P.P. Extruder: 100 mm; driving motor 60 HP Max. capacity: 190KG/ HR Feeding: spiral feeder; screen changer driven by A.C. motor with reducer; spaghetti type die head Stainless steel water tank and blower; rotary cutter with fixed blade Series: GSR-45 (45 mm, 15 HP) to GSR-150 (150 mm, 100 HP); options: conveyor with metal detector, crusher, hydraulic screen changer, 2nd extruder, vibrating screen
Shredder Integrated Recycling Machine
Categories : Crushing, Shredding & Granulating Equipment
Can handle large heavy materials or thin-film materials, such as lump from screen changer, roll material, bulk barrel, containers..., Two-stages filtration makes raw materials cleaner, fully automatic, and reduces the labor operating time. Operate easily. Accept customize., One machine with multiple functions.Solving complicated production, and the adjustment process is fast-High productivity, low noise, Easy operation, Blades removal is easy and reusable
Water Cooling Type Plastic Film Recycling Machine (GSR-85)
Categories : Recycling Lines by Application
The GSR-85 is a water cooling type plastic film recycling machine for HD, LD and LLDPE and P.P. scrap. Film is fed by a spiral feeder into an 85 mm extruder driven by a 40 HP motor, passes a screen changer driven by an A.C. motor with reducer, and is extruded through a spaghetti type die head into a stainless steel water tank. The cooled strands are blown dry and cut by a pull and cutting unit with a rotary cutter and fixed blade, at a maximum capacity of 120 KG/HR. The GSR-85 is the mid-size machine in a series that runs from the GSR-45 to the GSR-150, with extruder sizes from 45 mm to 150 mm and driving motors from 15 HP to 100 HP. All sizes are controlled from an independent switch board. Options include a conveyor with metal detector, crusher, screw conveyor, vacuum pump, pressure gauge, hydraulic screen changer, second extruder, vibrating screen, and an air blower with storage tank. Type: water cooling (spaghetti type) plastic film recycling machine Material: HD/LD/LLDPE & P.P. Extruder: 85 mm; driving motor 40 HP Max. capacity: 120 KG/HR Feeding: spiral feeder; screen changer driven by A.C. motor with reducer; spaghetti type die head Stainless steel water tank and blower; pull and cutting unit with rotary cutter and fixed blade Series: GSR-45 to GSR-150 (45 mm to 150 mm, 15 HP to 100 HP); options: conveyor with metal detector, crusher, hydraulic screen changer, 2nd extruder, vibrating screen
FILM/BAGS WASTE PLASTIC RECYCLING MACHINE : KCR-150
Categories : Recycling Lines by Application
The KCR-150 is a film/bag waste plastic recycling machine for HDPE, LDPE, and LLDPE film or bags, crushing and reprocessing the waste into pellets at an output of 300-400 kgs / hr.Waste is crushed by a 50 HP crusher, moved via a 2 HP screw conveyor into a 5" feed size, then collected in a 1400 L waste tank before entering a single-degasification Ø 150 mm screw (L/D ratio 30:1) heated at 141 kw across 8 zones and driven by an AC 125 hp inverter motor. The melt is extruded through a circular-shape die with a hydraulic-cylinder screen changer, cooled by a water-cooling system with a 2 HP pump, dehydrated by a 5 HP motor, and pelletized by a 2 pcs (spring) pelletizer.Model: KCR-150Suitable material: HDPE/LDPE/LLDPEOutput: 300-400 kgs / hrCrusher: 50 HPScrew diameter: Ø 150 mm, L/D ratio 30:1Heating capacity: 141 kw, 8 zoneDriving motor: AC 125 hp + InverterDie type: Circular Shape Extrusion DieWaste collecting tank: 1400 L
Screen Changer-PSG
Categories : Filtration & Screen Changers
The PSG series hydraulic screen changer was developed by Sino-Alloy Machinery as an important accessory for filtering out contaminants. Suitable for filtering out impurities and the amount of filtration can be determined by using different mesh sizes to meet high quality filter requirements. The PSG screen changer uses a manually operated hydraulic actuator to move the dual-cavity piston, allowing for changes within a few seconds. Additionally, it has a simple compact design for ease of use and cleaning.
HDPE High Speed Inflation Machine (GF-H45)
Categories : Blown Film Extruders
The GF-H45 is a high-speed blown film line for HDPE (high density polyethylene), the material used for thin, crisp bags such as grocery and produce bags. It is one of five sizes in the GF-H series, which spans the GF-H35 to the GF-H65, and is specified for a maximum film width of 600 mm. The extruder carries a 45 mm screw with a 20 HP inverter-controlled motor, and the 70 mm die is matched with a dual-lip air ring and a 3HP inverter-controlled blower. Output is rated at 40 KG/HR. The take-up tower is a fixed type with a 700 mm roller width, and winding is on a single-station manual surface winder controlled from an independent switch board. Options cover an auto loader, manual screen changer, pressure gauge, die rotating unit, LDPE dies and air ring, corona treater, embossing unit, second-station winder and air shaft. Material: HDPE Max. film width: 600 mm Extruder: 45 mm screw, 20 HP motor with inverter Die: 70 mm with dual-lip air ring; blower 3HP with inverter Max. capacity: 40 KG/HR Take-up: tower fixed type, 700 mm roller width; single-station manual surface winder Options: auto loader, manual screen changer, die rotating unit, LDPE dies/air ring, corona treater, embossing unit, 2nd station winder
Triple Manifold CPP Film Co Extrusion Line
Categories : Co-Extrusion Blown Film Machines
The MGB-CPP-1800-2LF is a triple manifold CPP film co-extrusion line built on a two-layer-stand design that saves space and cost, with a twin-screw configuration enabling dual production. The control system uses a movable human touch interface with digital communication monitoring of screw rotational speed, die head temperature, pressure, thermo air knife, and vacuum box, plus remote monitoring and recipe management.Temperature control uses an SCR system holding a tolerance of ±1°C to precisely control plasticizing, sheet thickness, flatness, and foaming proportion. The screw incorporates a static mixer and gear pump to accurately control extruding output, pressure, and time for homogeneous color, while a non-stop screen changer unit keeps production running during screen changes. A BAB three-layer auto die head with thickness measurement auto-adjusts film thickness for different materials, and in-line trimming, slitting, and crushing units recycle waste immediately.Model: MGB-CPP-1800-2LFLayers distribution: ABAThickness: 0.03 - 0.2 mmOutput: 250 - 450 kg/hrMachine dimension: 16,000 (L) x 7,500 (W) x 6,000 (H) mmOptional equipment: 20TON Chiller (1), Embossing roller (1)
PE Stretch Casting Film Extrusion Machine
Categories : Film and Sheet Extrusion Lines
T-Die Extruder machine can produce waterproof PE film for baby diaper, sanitary napkin, folders, table cloths, medical film, etc. Film thickness 0.03~1 mm Equipped with a fully automatic winder with cutting and changing rolls functions Hydraulic screen changer for short maintenance stop We didn’t show all our models, please don’t hesitate to contact us for bigger extruders.
PVA Water Soluble Blown Film Machine - GF-AV35.45
Categories : Blown Film Extruders
The GF-AV35.45 listing covers JANDI'S PVA water soluble blown film machines in two extruder sizes, which differ in extruder diameter and maximum film width. Both process PVA based water soluble, compostable and biodegradable compounds into tubular film for water soluble bags and packaging. Each machine is supplied with an extruder, a blown film die, an air ring, a take-up tower and a winder. Options are an auto loader, manual screen changer, pressure gauge, die rotating unit, corona treater, flying knife, second station winder, air shaft and air chiller. The showroom specification table lists the film width and extruder size of each model; details are available with quotation and specifications can be changed on request. Type: PVA water soluble blown film machine, GF-AV35.45 listing Models: two extruder sizes, listed in the specification table Material: PVA based water soluble, compostable and biodegradable compounds Extruder, blown film die, air ring, take-up tower and winder Options: auto loader, manual screen changer, pressure gauge, die rotating unit Options: corona treater, flying knife, second station winder, air shaft, air chiller Film width and extruder size per model in the specification table
PLA/ PBAT Blown Film Machine
Categories : Blown Film Extruders
The PLA/PBAT Blown Film Machine (GF-LB Series) is a blown film line configured for compostable and biodegradable resins based on PLA and PBAT. It produces tubular film from these compounds for downstream bag making, in the same way that JANDI'S GF-L series does for conventional polyethylene, and is listed in the showroom specification table as the GF-LB Series with film width and extruder size selected per model. The line is built from an extruder, a blown film die, an air ring, a take-up tower and a winder. Options include an auto loader, manual screen changer, pressure gauge, die rotating unit, corona treater, flying knife, second station winder, air shaft and air chiller. Film width, output and configuration are confirmed with the buyer at quotation; the specification table below lists the series range. Type: single-layer blown film machine, GF-LB Series Material: PLA/PBAT based compostable and biodegradable compounds Extruder, blown film die, air ring, take-up tower and winder Options: auto loader, manual screen changer, pressure gauge, die rotating unit Options: corona treater, flying knife, second station winder, air shaft, air chiller Film width and extruder size per model, confirmed at quotation
LD/LLDPE High Speed Inflation Machine (GF-L55)
Categories : Blown Film Extruders
The GF-L55 is a single-layer blown film line for LD and LLDPE (low density and linear low density polyethylene). It sits in the middle of the GF-L series, which runs from the GF-L35 up to the GF-L65, and is configured for producing polyethylene film for bags and packaging at a maximum film width of 1000 mm. The extruder uses a 55 mm screw driven by a 40 HP motor with inverter control, feeding a 200 mm die fitted with a dual-lip air ring. Rated output is 90 KG/HR. The line is controlled from an independent switch board, and film is taken up on a 1100 mm roller width and wound on a single-station manual surface winder. Options include an auto loader, manual screen changer, pressure gauge, die rotating unit, corona treater, HDPE dies and air ring, flying knife, second-station winder, air shaft and air chiller, so the same base machine can be specified for HDPE or for downstream printing. Material: LD/LLDPE Max. film width: 1000 mm Extruder: 55 mm screw, 40 HP motor with inverter Die: 200 mm with dual-lip air ring Max. capacity: 90 KG/HR Roller width: 1100 mm; single-station manual surface winder Options: auto loader, manual screen changer, die rotating unit, corona treater, HDPE dies/air ring, 2nd station winder, air chiller
High-Speed Dyeing & Pelletizing Production Line
Categories : Pelletizing & Compounding Lines
Suitable for masterbatch with fiber pelletizing, HDPE, LLDPE, LDPE, PP, PMMA, ABS, PC, Nylon, etc. Special screw design for compounding Changing material is easy Easy to operate Machine frame is very strong Customized screen changer
Die Face Cutting Type Recycling Machine(GHR Series)
Categories : Recycling Lines by Application
The GHR series is a die face cutting type plastic film recycling machine for HD, LD and LLDPE and P.P. film scrap, producing pellets that can go back into the extruder. Scrap is fed into a stainless steel densifying tank with rotary cutters, then extruded through a hydraulic screen changer and cut at the die face; the pellets are dried in a stainless steel centrifuge unit and collected in a stainless steel storage unit. The series covers extruder sizes of 65 mm, 85 mm, 100 mm and 120 mm.Motors with inverter are 50 HP, 75 HP, 100 HP and 125 HP across the four sizes, for maximum capacities of 120 KG/HR, 200 KG/HR, 300 KG/HR and 400 KG/HR. Options include a conveyor with metal detector, crusher, screw conveyor, vacuum pump, pressure gauge, second extruder, film roll feeder and vibrating screen. JANDI'S notes that adding a crusher makes it easier to handle scrap of different sizes such as loose film and die-cut waste, gives a more even temperature in the densifying stage, and results in more stable feeding, more stable extrusion output and more uniform pellet sizes.Type: die face cutting type plastic film recycling machineMaterial: HD/LD/LLDPE & P.P.Models: GHR65E, GHR-85E, GHR-100E, GHR-120E; extruder 65 mm, 85 mm, 100 mm, 120 mmMotor with inverter: 50 HP, 75 HP, 100 HP, 125 HPMax. capacity: 120 KG/HR, 200 KG/HR, 300 KG/HR, 400 KG/HRDensifying tank with rotary cutters, hydraulic screen changer, centrifuge drying unit and storage unit in stainless steelOptions: conveyor with metal detector, crusher, screw conveyor, vacuum pump, 2nd extruder, film roll feeder, vibrating screen
FILM/BAGS WASTE PLASTIC RECYCLING MACHINE : KCR-100
Categories : Recycling Lines by Application
The KCR-100 is a film/bag waste plastic recycling machine for HDPE, LDPE, and LLDPE film or bags, crushing and reprocessing the waste into pellets at an output of 80-200 kgs / hr.Waste is crushed by a 15 HP crusher, moved via a 2 HP screw conveyor into a 5" feed size, then collected in a 1400 L waste tank before entering a single-degasification Ø 100 mm screw (L/D ratio 30:1) heated at 71.7 kw across 6 zones and driven by an AC 60 hp inverter motor. The melt is extruded through a circular-shape die with a hydraulic-cylinder screen changer, cooled by a water-cooling system with 2 HP x 2 pumps, dehydrated by a 5 HP motor, and pelletized by a 2 pcs (spring) pelletizer.Model: KCR-100Suitable material: HDPE/LDPE/LLDPEOutput: 80-200 kgs / hrCrusher: 15 HPScrew diameter: Ø 100 mm, L/D ratio 30:1Heating capacity: 71.7 kw, 6 zoneDriving motor: AC 60 hp + InverterDie type: Circular Shape Extrusion DieWaste collecting tank: 1400 L
FILM/BAGS WASTE PLASTIC RECYCLING MACHINE : KCR-120
Categories : Recycling Lines by Application
The KCR-120 is a film/bag waste plastic recycling machine for HDPE, LDPE, and LLDPE film or bags, crushing and reprocessing the waste into pellets at an output of 200-300 kgs / hr.Waste is crushed by a 30 HP crusher, moved via a 2 HP screw conveyor into a 5" feed size, then collected in a 1400 L waste tank before entering a single-degasification Ø 120 mm screw (L/D ratio 30:1) heated at 80.8 kw across 7 zones and driven by an AC 100 hp inverter motor. The melt is extruded through a circular-shape die with a hydraulic-cylinder screen changer, cooled by a water-cooling system with a 2 HP pump, dehydrated by a 5 HP motor, and pelletized by a 2 pcs (spring) pelletizer.Model: KCR-120Suitable material: HDPE/LDPE/LLDPEOutput: 200-300 kgs / hrCrusher: 30 HPScrew diameter: Ø 120 mm, L/D ratio 30:1Heating capacity: 80.8 kw, 7 zoneDriving motor: AC 100 hp + InverterDie type: Circular Shape Extrusion DieWaste collecting tank: 1400 L
FILM/BAGS WASTE PLASTIC RECYCLING MACHINE : KCR-85
Categories : Recycling Lines by Application
The KCR-85 is a film/bag waste plastic recycling machine for HDPE, LDPE, and LLDPE film or bags, crushing and reprocessing the waste into pellets at an output of 80-120 kgs / hr.Waste is crushed by a 15 HP crusher, moved via a 2 HP screw conveyor into a 5" feed size, then collected in a 1400 L waste tank before entering a single-degasification Ø 85 mm screw (L/D ratio 30:1) heated at 45.6 kw across 5 zones and driven by an AC 40 hp inverter motor. The melt is extruded through a circular-shape die with a hydraulic-cylinder screen changer, cooled by a water-cooling system with 2 HP x 2 pumps, dehydrated by a 5 HP motor, and pelletized by a 2 pcs (spring) pelletizer.Model: KCR-85Suitable material: HDPE/LDPE/LLDPEOutput: 80-120 kgs / hrCrusher: 15 HPScrew diameter: Ø 85 mm, L/D ratio 30:1Heating capacity: 45.6 kw, 5 zoneDriving motor: AC 40 hp + InverterDie type: Circular Shape Extrusion DieWaste collecting tank: 1400 L
AUXILIARY EQUIPMENT
This range of auxiliary equipment supports plastic film extruders and extrusion lines, covering the take-up, winding, and screen-changing stages of the process.The line-up includes a roller-type bubble guide bracket, a waste collecting winder with a gear box direct-connected to the main motor, a horizontal type winder and semi-auto winders (unit 1 and unit 2), and a choice of manual, horizontal, or pneumatic screen changers, along with a rotating die option.Bubble guide bracket: roller typeWaste collecting winder: gear box direct connect to main motorWinder options: horizontal type winder, semi-auto winder unit (1) and unit (2)Screen changer options: manual screen changer, horizontal screen changer, pneumatic screen changerDie option: rotating die
Spaghetti Type Recycling Machine(GSR Series)
Categories : Recycling Lines by Application
The GSR Series is JANDI'S water cooling, spaghetti type recycling machine for polyethylene and polypropylene film scrap. Film is fed by a spiral feeder into the extruder, and the melt is extruded through a spaghetti type die head into strands; the strands are cooled in a stainless steel water tank, dried by a blower and cut into pellets by a pull and cutting unit with a rotary cutter and fixed blade. A screen changer driven by an AC motor with reducer filters the melt ahead of the die.The series covers a range of extruder sizes and motor ratings so that capacity can be matched to the scrap volume of a film or bag plant; the figures for each model are listed per model in JANDI'S GSR specification table. Options include a conveyor with metal detector, crusher, screw conveyor, vacuum pump, pressure gauge, hydraulic screen changer, second extruder, vibrating screen and an air blower with storage tank. Details are available with quotation.Type: water cooling, spaghetti type recycling machine, GSR SeriesMaterial: HD/LD/LLDPE and PP film scrapSpiral feeder into the extruderScreen changer driven by AC motor with reducerSpaghetti type die head, stainless steel water tank and blowerPull and cutting unit with rotary cutter and fixed bladeOptions: conveyor with metal detector, crusher, screw conveyor, vacuum pump, hydraulic screen changer, second extruder, vibrating screenExtruder size and capacity per model, confirmed at quotation
Options: Double Plates For Extrusion Machine
Categories : Pelletizing & Compounding Lines
Non-stop screen-changer system to keep the production operate while replacing the filter plate. With 2 honeycombed plate to increase the leached area and efficiency.
Filtering System: Double Pistons For Extrusion Machine
Categories : Pelletizing & Compounding Lines
Double Pistons For Extrusion Machine Non-stop screen-changer system to keep the production operate while replacing the filter plate. With 4 removable-honeycombed plate to increase the leached area and efficiency.
Filtering System: Back Flush For Extrusion Machine
Categories : Pelletizing & Compounding Lines
Non-stop screen-changer system to keep the production operate while replacing the filter plate. With 4 removable-honeycombed plate to increase the leached area and efficiency. Decrease the consumption cost and the frequency of filter-change to save the labor cost. The special passageway design can drain material off individually, and purge contaminants by the filter. Due to the filtration through specified passageway, this backflush screen change system is purging and expelling the dirty material simultaneously.
Screen Changer
Categories : Separating & Filtration Equipment
HYDRAULIC SLIDE PLATE Hydraulic system, easy for operation. Optional guard cover to provide highest safety operation. Materials : most polymer. Application : for extrusion products such as sheet and films. Hydraulic system, easy for operation. NON-STOP SLIDE PLATE Streamline and smooth channel for easy clean and little polymer stagnation. Interruption free and few bubbles caused by filter replacement. Hydraulic system with nitrogen accumulator for easy and fast operation. Fast slide plate movement for non-stop production. Materials : most polymer. Application : for extrusion products such as opitical, sheet and films. DUAL SLIDE PLATE Continuous production process. Interruption free filter replacement. Hydraulic system is driven by solenoid valve for easy operation. Optional guard cover to provide highest safety operation. Materials : most polymer. Application : suitable for sheet products. DUAL PISTON Continuous production process, air does not enter the production process. Interruption free by filter replacement. Hydraulic system is driven by solenoid valve for easy operation. Optional auto-venting system. Can be equipped with a fully automatic exhaust. Optional guard cover to provide highest safety operation. Materials : most polymer. Application : suitable for optical, sheet, film and other products. LARGE FILTRATION Continuous production process. Special venting design that no air enter the process during screen changing. Hydraulic system is driven by solenoid valve for easy operation. Optional auto-venting system.Can be equipped with a fully automatic exhaust. Can be equipped with a fully automatic exhaust. The filter area is about 2~5 times larger than the Dual Piston. Optional guard cover to provide highest safety operation. Materials : most polymer. Application : suitable for granulation, sheet, film and other products. BACK-FLUSH Interruption free filter replacement. Low pressure difference for stable and continuous production during filter replacement. Maintain 75% filtering area during filter replacement and backwash. Safety cover design improves operator safety. Automatic backwash and exhaust function for cutting filter replacement loss, operating requirements and scrap reduction. High wear-resistance, high pressure resistance, high-precision filter design provides effective filtering area and filter quality. Materials : most polymer. Application : suitable for recycle, granulation, packing tape and film. MANUAL WITH LEVER GEAR Easy operation with lever gear. Energy saving without driven system. Easy to clean when changing materials or colors frequently. Machine shutdown before filter replacement. Machine shutdown before filter replacement. Application : usually applied on sheet line, blow line and lab machine. SELF-CLEANING FILTER Interruption free filter replacement. Large filtering area, applicable with a larger mesh count. Manual back wash. Energy saving without driven system. Materials : most polymer. Application : usually applied on sheet , lamination and film line. CANDLE TYPE Compact mechanical design for higher mesh count to extend filter time. Manual network change, no hydraulic system. Adjustable pressure control during production to increase the effect of mixing in the screw. Application : applied on Lamination and film line.
Rigid Sheet Extrusion Line
Categories : Film and Sheet Extrusion Lines
1. Extruder is driven by AC Inverter duty motor, with excellent efficiency and lowest power consumption. 2. Extruder hopper with low-level sensor work with auto-feeder will keep material in stable supply. 3. Hydraulic driven screen changer avoid any particle goes to melting pump & flat-die. 4. Melting pump with accurate rotation control, keeps the material flow stable. 5. Extruder & melting pump speed is working on pressure synchronized controlling system.
HEAVY-DUTY BLOWN FILM MACHINE
Categories : Blown Film Extruders
Film width 2000 ~ 4000mm, for general packing and agricultural Hutch. Heavy duty construction, take up tower. Automatic surface winder with uploading device. Swing type manual screen changer. LDPE / LLDPE Heavy Duty Big Size Blow Film Machine. Screen changer of swing manual type. Extruding die of single spiral channel gives even and smooth flow pressure, Air ring of dual orifice design ensures ultimate cooling. Heavy duty steel structure takes up tower. EPC (Edge Position Controller) Fully automatic big roll type single winder or back to back auto winder.
HIGH-SPEED MONO-LAYER BLOWN FILM MACHINE
Categories : Blown Film Extruders
Advanced screw design and groove feeder to get excellent material mixing, high output, and reliable production quality. Unique die head and air ring to achieve stable bubble and better even thickness film and bag. Provides a good solution for T-shirt bag, shopping bag, agriculture, and many others. Adjustable tower height. FEATURES Raw material be used: HDPE / LDPE / LLDPE / EVA. High efficient machine with low energy consumption but high output. High class gear box with enforced lubrication system and oil cooler. Good mixing performance from screw and barrel. OPTIONAL DEVICES Auto-loader Single-layer dies & air rings A/A Two-layer dies & air rings Rotary die Manual screen changer I.B.C. (Internal Bubble Cooling) OBC Film thickness (gauge) control system. Corona treaterEmbossing roller Double winder Load cell In-line flexographic printer
OPTIONAL DEVICES FOR PLASTIC BLOWN FILM
Categories : Turnkey & Auxiliary Integration Solutions
FEATURES Full range of equipment will meet your machine requirement, we also provide machine parts selling individually (Die head and air ring upgrade, screen changer upgrade, winder upgrade etc.).