Auxiliary Equipment and Integrated Automation
- Acid Washing Machine
- Air Compressors
- Assembly Systems
- Brushing Machines
- Control Equipment
- Cooling Equipment / Industrial Chillers
- Cutting Machines
- Dosing and Measuring Equipment
- Dryers and Dehumidifiers For Plastic Materials
- Film and Filament Stretching Lines
- Hydraulic Punching Machines
- Indicators and Sensors
- Industrial Robots
Double screen changer
Two step automatic screen changer
Self-cleaning screen changer for high contamination
Self-cleaning continuous screen changer for dirty material
Automatic melt filter for high contamination
Two stage automatic melt filter
ERA, what’s the trick?
ERA is made of two internal filtration chambers and two independent discharge valves, thus enabling to setup a pre-filtration on the first step and a finer one in the second, all in the same machine! This means, in short, the possibility of using cheap punched screens (400-2000 micron) to protect the expensive laser screens (100-300 micron) coming afterwards. The resulting cost reduction is undeniable, both on the financial and energetic side.
DOUBLE FILTRATIONBeing able to perform two filtration steps in one is a remarkable advantage: it means you’ll save money on energy and investment costs alike.
Such savings are bound to have a very positive impact on your company’s budget.
ERA allows a significant waste reduction, adjustable by tuning the opening time of the valve. This is a key factor in producing a high quality output, and having this much control further guarantees a result up to your standards.
No melt is too contaminated for ERA, and its double filtration chamber design, in connection with the possibility to equip both punched and laser screens, will allow even the most contaminated of melts to reach the highest quality standards. Furthermore, the use of non-auger valves permits the processing of the most aggressive contaminations like iron and sand, preventing any damage to the screen.
ERA greatly increases the hourly yield of the extruder, since the filter allows the melt to flow seamlessly and without any obstacle. Furthermore, the filtering surface of a single screen changer reaches an impressive (double) 2.776 cm2 thanks to its double filtration chamber design!
|FILTER DIMENSION||LASER SCREEN||PUNCHED SCREEN||METALLIC MESH SCREEN||Material|
Ø600mm - 2776x2cm²
Ø700mm - 3796x2cm²
micron: from 80 to 300
mesh: from 180 to 50
micron: from 400 to 2000
mesh: from 40 to 10
|PP / LDPE / LLDPE / HDPE / PS / EPS / XPS / ABS / PVB|