English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
Single Screw Underwater Pelletizing Extrusion Line | CK-S
Categories : Single Screw Extruders
CYKF CK-S series Single Screw Underwater Pelletizing Extrusion Line can be applied to a wide range of applications. It is especially suitable for materials with high viscosity, low MI, and difficulty to be shaped, e.g., TPE and TPR. Possible materials : TPU, TPE, TPV, TPR, PP, PS, PLA, PVA, SEBS, EVA, Rubber, Hot-melt adhesive, Special resin, and Micro pellet, etc.
Co-rotating Twin Screw Underwater Pelletizing Compounding Line | CK-HT
Categories : Twin Screw Extruders
CK-HT series Co-rotating Twin Screw Underwater Pelletizing Compounding Extrusion Line is designed especially for compounding materials with high viscosity, low MI, or difficulty to be shaped. The extrusion line can be applied to a wide range of materials and applications. Possible materials: TPU, TPE, TPV, TPR, PP, PS, PLA, PVA, SEBS, EVA, Rubber, Hot-melt adhesive, Special resin, and Micro pellet, etc.
Foam Grades
Categories : TPE (Thermoplastic Elastomer)
Can replace foaming materials such as EVA, TAFMER, Engage, and EPDM. Used for EVA modification to achieve superior elasticity and anti-slip properties. Suitable for compression molding and injection foaming. Made of SEBS material.
SE series
Categories : TPE (Thermoplastic Elastomer)
Used for weather-resistant products such as ultra-soft transparent insoles, soda cap gaskets, bicycle grips, and snow boots; made of hydrogenated SEBS material.
PL series
Categories : TPE (Thermoplastic Elastomer)
It can be used with general-purpose plastic materials such as PP, PE, PS, ABS, Nylon, and PC, and is a hydrogenated SEBS material.
GP series
Categories : TPE (Thermoplastic Elastomer)
General purpose, widely used in general products, is a blend of SEBS and SBS materials.
T-Shirt Bag Making Line (JIT-55)
Categories : Bag Making Machine by Applications
The JIT-55 is the mono-layer semi-automatic type in JANDI'S JIT T-shirt bag making line. A JIT line links blown film extrusion, flexographic printing and bag making into one in-line process: resin goes in at one end and printed, heat-cut T-shirt bags come out at the other, without film rolls being stored and re-handled between steps. The line is specified for biodegradable material as well as HDPE resin with filler.The in-line flexographic printer runs water-based and solvent-based inks, a bobbin change unit allows non-stop operation, and a waste recovery unit returns the die-cut scrap to the line. Compared with the two-colour full-automatic type in the same series, the JIT-55 is the semi-automatic configuration; bag size, motor size and roller width are listed in the specification table below.Type: T-shirt bag making line, in-line blown film, printing and bag makingConfiguration: mono-layer semi-automatic typeModel: JIT-55Material: biodegradable material, HDPE resin, fillerIn-line flexographic printer for water-based and solvent-based inksBobbin change unit for non-stop operationHeat-cutting type bag sealing unitWaste recovery unit for on-line reuse of die-cut scrap
High Speed 3 Lines T-Shirt Bag Making Machine With Hot Slitting and Side Gusseting Unit
Categories : Plastic Bag Making Machines
The MGA-TS-360-G3 is Ming Jilee's high speed 3-line T-shirt bag making machine, built with a hot slitting station and a side gusseting unit so all three lanes cut, seal and gusset bags in one synchronized pass.It handles bag lengths of 350 - 650 mm and bag widths of 160 - 365 mm, running film at 0.008 - 0.05 mm thickness / layer at 160-220 cycles/min/line per lane, powered by an 8 kw heater on a 220V, 3Phases, 50 / 60 HZ, 25KVA supply. The machine has a footprint of 972 x 225 x 212 cm at a net weight of 5,000 kg.Model: MGA-TS-360-G3Bag length: 350 - 650 mmBag width: 160 - 365 mmBag thickness / layer: 0.008 - 0.05 mmSpeed / cycle / min / line: 160-220Heater: 8 kwPower: 220V, 3Phases, 50 / 60 HZ, 25KVADimensions (L x W x H): 972 x 225 x 212 cmNet weight: 5,000 kg
Slitting & Rewinding Machine
Categories : Plastic Bag Making Machines
The BJL-B600 is Ming Jilee's slitting and rewinding machine for bag converting operations. It processes CPP, paper, and BOPP substrates, slitting to widths from 12 - 600 mm for downstream converting.Slitting and rewinding output ranges from 0 - 120 M/min, giving operators flexibility to set speed according to substrate type and roll size. The machine has a footprint of 1,100 (L) x 2,300 (W) x 1,300 (H) mm.Model: BJL-B600Feed material: CPP, Paper, BOPPSize: 12 - 600 mmOutput: 0 - 120 M/minMachine dimension: 1,100 (L) x 2,300 (W) x 1,300 (H) mm
Shredder-granulator Combo-GCV Series
Categories : Crushing, Shredding & Granulating Equipment
Shredder-granulator Combo GCV series machine is a set of shredding and granulating integrated processing equipment, widely used in a variety of plastic materials. The upper space of the equipment is set as the shredding area, which adopts the structure of closely arranged small-blade- rotor-shaft, and is equipped with the forced feeding mechanism of the space is provided with a crushing area, and the structure of the rotor shaft and the feeding mode can be determined according to different materials, characteristics and output of the crushed objects. The shredded and crushed materials do not need any conveying equipments. The machine has more compact structure, using less footprint, which has an outstanding cost performance.
Twin-Cone High Speed Pelletizing Machine-Die-Face Cutting
Categories : Pelletizing & Compounding Lines
Process Rubber/Plastic mixed material, EVA, TPR, PVC, CaCO3, PVB, PU, TPU compounding, various kinds of masterbatches pelletizing High capacity Low electricity usage Easy to clean and change materials Knead well Die-face cutting Adequate kneading
Rigid Plastics Recycling System
Categories : Recycling Lines by Application
1.Boretech Rigid Plastic Recycling System can process a wide variety of plastic, with process design proven over the years. With a hot chemical washing module, the washing line can achieve better and more consistent quality for the end product. 2.The entire washing line can be equipped with a DCS system and PLC control to minimize the usage of manpower. 3.The washing line is also designed with a chemical water circulation system and an online rinse water circulation system to reduce carbon footprint. 4.The washing line has a one-button start and stops design that makes it much easier on operation and maintenance.
Rigid Plastics and PE Film Recycling System
Categories : Washing & Classifying Lines
- Boretech Rigid Plastic Recycling System can process a wide variety of plastic, with process design proven over the years. With a hot chemical washing module, the washing line can achieve better and more consistent quality for the end product. -The entire washing line can be equipped with a DCS system and PLC control to minimize the usage of manpower. -The washing line is also designed with a chemical water circulation system and an online rinse water circulation system to reduce carbon footprint. -The washing line is also designed with a chemical water circulation system and an online rinse water circulation system to reduce carbon footprint.
Pedestrian Signals
Categories : Industrial Parts & Safety Gear
This product is made of **ABS (Acrylonitrile Butadiene Styrene) plastic material**, offering **high impact resistance, weather resistance, waterproof, dustproof, and UV protection** properties. It ensures long-term stable operation of pedestrian signal lights in various outdoor environments. The housing design complies with **international traffic equipment standards**, providing **excellent durability and safety**. It is **highly resistant to breakage**, extending the product's lifespan and making it suitable for various pedestrian signal light systems.
Mould Sweat Dehumidifiers - SMD-H
Categories : Dryers and Dehumidifiers
SMD series mould sweat dehumidifiers are designed to remove the moisture sweat from condensing on the mould surface. Forming of moisture sweat on the mould surface is due to the use of chilled water for reducing the moulding cycle time, particularly while moulding of the PET preforms. This series of machine uses honeycomb rotor to carry out dehumidifying function, which generates a dry airflow with dew point ranging from 0℃ to -10℃, and ensures the surrounding air of mould remaining in a low dew-point temperature. It provides constant low dew-point surrounding air to the mould surface all year round without being influenced by the change of seasons.
Masks Horizontal Flow Packaging Machine
Categories : Sealing Machines
The MGA-MSK-P is a horizontal flow packaging machine for wrapping finished masks, sealing them into bags formed from OPP, OPP/PE, or OPP/CPP packing film. It handles film thickness from 20 to 60 micron and produces bags from 90 to 350 mm in length, up to a maximum width of 450 mm.The machine accommodates packed products from 20 to 90 mm in width, running at 20 to 95 cycles per minute. It draws 4.5 kw of required power within a footprint of 3,880 (L) x 940 (W) x 1,530 (H) mm.Model: MGA-MSK-PPacking material: OPP, OPP/PE, OPP/CPPFilm thickness: 20 - 60 micronBag length: 90 - 350 mmMax. width: 450 mmPacked product width range: 20 - 90 mmOutput: 20 - 95 cycle/minMachine dimension: 3,880 (L) x 940 (W) x 1,530 (H) mmMachine weight: 800 kgRequired power: 4.5 kw
Fully Automatic Ear- Loop Type FFP2 / KN95 Mask Machine
Categories : Bag Making Machine by Applications
The MGA-MSK-KN95 (CE) is a fully automatic ear-loop type mask machine built for FFP2 and KN95 mask production, forming non-woven fabric layers into a three-dimensional mask body, welding the layers, attaching a nose bridge piece, and adding ear loops in a single automated production sequence. The machine runs a fixed mask size compatible with FFP2 / KN95 mask specifications.Output reaches 40 - 50 pcs/min from a footprint of 9,200 (L) x 2,200 (W) x 1,800 (H) mm. Optional equipment extends the base configuration with an inkjet printer, a nose foam labeling system, and an upgrade to a Herrmann ultraschall ultrasonic system made in Germany.Model: MGA-MSK-KN95 (CE)Mask size: fixed size, compatible to FFP2 / KN95 maskOutput: 40 - 50 pcs/minMachine dimension: 9,200 (L) x 2,200 (W) x 1,800 (H) mmMachine weight: 2,500 kgOptional: Inkjet printer (European brand)Optional: Nose foam labeling systemOptional: Upgrade ultrasonic system to Herrmann ultraschall (made in Germany)
Laboratory Underwater Pelletizing Compounding System | CK-42HT
Categories : Pelletizing & Compounding Lines
CK-42HT Laboratory Underwater Pelletizing Compounding System is designed for laboratory purpose, especially for experiments on the materials that have low melting temperature and high viscosity. Possible materials : TPU, TPE, TPV, TPR, PP, PS, PLA, PVA, SEBS, EVA, Rubber, Hot-melt adhesive, Special resin, and Micro pellets, etc.
KT Series Injection Molding Machine (ROTARY TABLE)
Categories : Vertical Injection Molding Machines
Vertical mold clamping and injection, small footprint and high degree of precision.....
Knife-Cutting Bag Making Machine (GF-A812E-SV+C)
Categories : Cutting Machines
The GF-A812E-SV+C is a servo-driven knife-cutting bag making machine for bottom sealing bags. In the single-deck GF-A812E/SV configuration it makes 2 x 400 mm W bags or 1 x 800 mm W bags with a cutting width of 850 mm and a cutting length of 1200 mm, on film from 0.01 - 0.1 mm thick. The rear feeder is controlled by feeding sensors, sealing is a single sealing line with one sealing knife, and cutting is by a separate cutting knife.The machine is controlled through an HMI panel with a YASKAWA servo drive from Japan, and automatic stacking is standard. The same series extends to double-deck, triple-deck and 4-deck models — for example the GF-A824E/SV, GF-A836E/SV and GF-A848E/SV — for higher output from one footprint, with special designs available upon request. Options include a hole punch device, printing scanner and automatic punch unit.Type: knife-cutting bag making machine, bottom sealing bagSingle-deck model GF-A812E/SV: 2 x 400 mm W or 1 x 800 mm WCutting width: 850 mm; cutting length: 1200 mmFilm thickness: 0.01 - 0.1 mmRear feeder controlled by feeding sensors; 1 sealing knife, single sealing line; 1 cutting knifeControl: HMI; servo drive YASKAWA / JAPAN; automatic stackingMulti-deck versions: double, triple and 4-deck models; options: hole punch device, printing scanner, auto punch unit
TPE for Automotive Parts - TSO/TO Series
Categories : TPR (Thermoplastic Rubber)
EVERLON® is a kind of SEBS as TPE, which the middle of it is the Styrene Ethylene rubber and the end of it is the Polystyrene. Through the catalytic reaction, it include the weatherability and stability of heat-resistant ability. Thermoplastic Vulcanizates (TPVs)based on EPDM. Applications：Antena, Exhaust duct, Window seal, Fender. Ever Polymer has the mission to satisfy all the application needs for thermoplastic elastomers (TPE) raw materials in the market. TPE TPR tpe material tpe material eco friendly tpe material manufacturer tpe material properties tpe material toxic tpe plastic recycling tpe raw material tpe rubber what is tpe material tpe material safety
Aluminum Foil Coating Machine Tandem Type (WAC-DT Series)
Categories : Industrial Lamination
For its strong characters of odor free, lightproof, antioxidant, and flavor preservation, aluminum foil has become one of the most popular solutions for soft packing industries. Laminated aluminum foil has multiple advantages: antioxidant, moisture-proof, also avoiding from direct sun exposure and etc., and it not only does help extend the expiration period but also increase the product value by effective visual presentation through its metallic glossy texture. For years, aluminum foil has been widely used in many different industries, such as pharmaceutical and food sectors; to create satisfactory solution to the demand of those sectors, it requires specific machinery technologies in aluminum foil printing or coating. This model is specially designed for aluminum foil coating. The whole structure of machine is consisted of primer coating unit, HSL coating unit , So it allows same side or two side coating in one go. The coating process options are available options for different requirements of direct gravure coating & semi-flexo coating. The high efficient drying tunnel is set on top of the machine . For feeding operation, double shaft turret type automatic splicing devices both on unwinding/rewinding units. The whole machine is controlled by PLC digital control system and HMI touch screen interface, which makes coating production easier and more convenient.
All Electric Single Station Blow Moulding Machine For 20lt Jerry Can, 3 Layer
Categories : Electric Blow Molding Machines
All Electric Blow Moulding Machine with a single head single station model was exhibited. In compliance to today’s global topic for a friendly environment, low energy consumption, less plastic in use, low carbon footprint.
Accumulator Head Blow Moulding Machine for Table Top
Categories : Extrusion Blow Molding Machines
Compact design with less footprint Energy saving with high/low pressure circuit ONE HMI for total operation function Remote access for support diagnosis and troubleshooting Product range up to 22kgs shot weight
V-Ring
Categories : Industrial Parts & Safety Gear
A V-ring is a critical axial elastomer seal engineered to protect bearings and mechanical components from external contamination. Unlike conventional oil seals, the V-ring mounts directly onto the rotating shaft and seals against the counterface (housing), providing a highly effective, flexible, and maintenance-friendly sealing solution for modern machinery. Key Benefits of V-Rings: Superior Contamination Barrier: Prevents ingress of dust, dirt, sand, and water splashes, preserving lubricant purity. Low Friction & Long Service Life: The flexible V-shaped lip applies minimal contact pressure, reducing energy loss, heat generation, and wear on the counterface. Self-Centering Design: Mounted with an interference fit, the V-ring rotates with the shaft, using centrifugal force to deflect liquids and debris away from the seal. Ease of Installation: No specialized tools or tight housing tolerances required, ideal for new equipment and MRO applications. Dry Running Capability: Performs reliably even in applications with minimal or intermittent lubrication.
D-Ring
Categories : Industrial Parts & Safety Gear
A D-Ring is a high-performance mechanical seal with a distinctive "D"-shaped cross-section, featuring a flat base and a curved sealing face. This innovative geometry combines the effective sealing properties of an O-ring with the enhanced stability of a square ring, making it an ideal solution for preventing spiral failure, extrusion, and dynamic leakage in rotary and reciprocating applications. D-Rings deliver reliable performance under high pressure, dynamic motion, and challenging industrial conditions, ensuring long service life and minimal maintenance.
KT Series Injection Molding Machine (SINGLE SLIDE)
Categories : Vertical Injection Molding Machines
Vertical mold clamping and injection, small footprint and high degree of precision.....
TPE for Food Package - TP Series
Categories : TPE (Thermoplastic Elastomer)
Ever Polymer has the mission to satisfy all the application needs for thermoplastic elastomers (TPE) raw materials in the market. TPE TPR TPE material tpe material eco friendly tpe material manufacturer tpe material properties tpe material toxic tpe plastic recycling tpe raw material tpe rubber what is tpe material tpe material safety
TPE for Industrial Parts - TA/TC/TS/TZ/TF Series
Categories : TPR (Thermoplastic Rubber)
EVERLON® is a SEBS base TPE, which the middle of it is the Styrene Ethylene rubber and the end of it is the Polystyrene. Through the hydrogenation reaction, it result in excellent weatherability and stability of heat-resistant ability. Thermoplastic Elastomers (TPEs) based on SEBS. Applications：Computer & Laptop, Cell phone case & Digital camera, Industrial parts. Ever Polymer has the mission to satisfy all the application needs for thermoplastic elastomers (TPE) raw materials in the market. TPE TPR tpe material tpe material eco friendly tpe material manufacturer tpe material properties tpe material toxic tpe plastic recycling tpe raw material tpe rubber what is tpe material tpe material safety
Shaftless Type Dry Laminating Machine DL- S1000/S1300/S1600
Categories : Industrial Lamination
This machine is for the Laminating process that using solvent-based adhesive. Reliable tension control with mature lamination process able to make high-end product such as retort, sterilize and medical pouches. The gravure coating station allows high precision and consistency on coating weight. Efficient drying tunnel has high performance on vaporizing solvent completely to keep the product safely. Various options of heating solution for drying tunnel are available. Energy-saving system is an option to help decreasing carbon footprint and the cost on production.
Thermal Laminating Machine TL-C800
Categories : Industrial Lamination
The Compact Pack Ready, TL-C800, is designed for surface print applications and is an ideal solution to jump-start your flexible packaging business with lower investment and footprint. This machine is the perfect solution for users who are looking to start with a simple business plan for web-to-print and short and medium runs with prelaminated structures.
Dry Laminating Machine Shafted Type DL-1000/1300/1600
Categories : Industrial Lamination
This laminating machine is designed for processes utilizing solvent-based or water-based adhesives. It ensures reliable tension control and features a mature lamination process, enabling the production of high-end products such as retort pouches, sterilized packaging, and medical pouches. Equipped with a gravure coating station, it delivers high precision and consistency in coating weight. The efficient drying tunnel ensures complete vaporization of solvents, maintaining product safety. Various heating solutions are available for the drying tunnel, and an optional energy-saving system can reduce carbon footprint and production costs.
TPE for Medical Instrument - TM Series
Categories : TPE (Thermoplastic Elastomer)
Ever Polymer has the mission to satisfy all the application needs for thermoplastic elastomers (TPE) raw materials in the market. TPE TPE for Medical TPR tpe material tpe material eco friendly tpe material manufacturer tpe material properties tpe material toxic tpe plastic recycling tpe raw material tpe rubber what is tpe material tpe material safety
Additive - TX Series
Categories : Additives
Ever Polymer has the mission to satisfy all the application needs for thermoplastic elastomers (TPE) raw materials in the market. TPE TPR tpe material tpe material eco friendly tpe material manufacturer tpe material properties tpe material toxic tpe plastic recycling tpe raw material tpe rubber what is tpe material tpe material safety
Proofing Machines FCM-1300
Categories : Slitters and Rewinders
Applications of FCM-1300 Proofing and sampling for engravers & packaging printers Functions of FCM-1300 Check cylinder engraving quality including the accuracy of text, colors and ink standards. Production press simulation for samples with different colors offers variety for customers. Benefits of FCM-1300 One man operation. 10 minute proofing. Reduces ink and material use. Maximizes production press time. Use production inks and materials. Features of FCM-1300 1. Machanical position on printing roller In combination with inductive proximity switch and mechanical headstock can make sure the printing roller will return to exact position before every proofing. 2. High solution cameras and video registration system With a high solution camera and an electronically generated dual cross on the screen which 16 times magnifies the arrow on every cylinder can eliminate parallax error. 3. Adjustable doctor blade device Consists of 2 doctor blade to intense the hardness. Adjustable angles and pressure accommodates variable patterns of the cylinder. 4. Shaft-less air chuck Allows easy and safe loading of a cylinder and wash-off by one operator. It can be suttle adjusted to accommodate different width of the cylinder. 5. Adjustable cylinder deck Easy and safe operation for loading the cylinder by pneumatically adjusting the deck upward and downward. 6. Superduper printing roller (1)Smooth, rustproof, and heavy-duty printing roller through chromium-electroplated and grinding process. (2)Bouncy compressible blanket, closely dovetailed with printing roller, can easily be replaced when it is blot and spoiled. (3)The proofing length is up to 2500mm. Depending on the size of cylinders, it can print at least 2 copies of samples in every proofing. 7. Powerful vector motor The printing roller is driven by an powerful 7.5 HP vector motor. 8. Adjustable proofing speed Accommodating different material and ink quality, the proofing speed can be adjusted from 20 to 90 m/min. 9. Linear guide way All of the sliders applied to air chuck and cylinder adopt linear guide ways. With height position exactitude, the device will not facilely glide on linear movement.
Granulating System: Underwater Pelletizer
Categories : Pelletizing & Compounding Lines
Underwater pelletizer with advanced water cooling technology. Energy saving, Easy Operation Underwater Pelletizing System. Mainly used for plastic materials such as PP、TPU、TPR、TPE etc.
HF-S SERIES: Single Screw Pellet Extrusion Machine
Categories : Pelletizing & Compounding Lines
Mainly apply in the thermal polymer compounding field, and we can design a production line to meet the needs of customers in the pelletizing, plate, film, and pipe extrusion. Applicable materials : PE、LDPE、LLDPE、HDPE、PP、PET、PS、PA、BOPP、 ABS、PEEK、TPU、TPV、TPR、RUBBER、FEP、SMA
HF-TS SERIES: Plastic Pellet Extruder ( Twin Screw )
Categories : Pelletizing & Compounding Lines
This pelletizing equipment (Twin screw pelletizing extrusion) is mainly applied to the thermal polymer compounding field, and we offer customized compounding solutions for any requests. We supply the twin screw compound process with an appropriate dosing system in order to create a high quality output, and we can design a production line to meet the needs of customers based on the differences of materials. Applicable materials : PET、PA、PS、ABS、PEEK、PE、LLDPE、LDPE、HDPE、 PP、BOPP、TPU、TPE、TPV、TPR、RUBBER、FEP、SMA
Two Platen Injection Molding Machine NRH Series
Categories : Horizontal Injection Molding Machines
The NRH Series Two-Platen Injection Molding Machine is your ideal choice for manufacturing large and complex plastic components in various sectors, including automotive, logistics, and home appliances. With patented mechanical innovations and compact design, it delivers consistent precision, fast mold change, and long-term durability, making it the go-to solution for businesses seeking performance and efficiency in high-tonnage molding.
Carbonated Soft Drink Bottle
Categories : Horizontal Blow Molding Machines
Servo motor power and pneumatic combination structure. Stable, environmentally friendly, energy-efficient, low noise, low pollution. Blow Molding machine Breakthrough traditional heating methods and low energy consumption. We included gas recovery device to reduce air consumption of air compressor gas. Modular structure design, simple, reasonable and easy to operate and maintain PET Stretch Blow Molding Machines. Reasonable space configuration, small footprint. Easy-to-understand human-machine interface of machines and operation is easier. All components use internationally renowned brands to ensure accurate and stable operation.
i-Vision Bottle Orientation System
Categories : Shrink Sleeve Machinery
An orientation system mainly used to fix a position for the passing containers to a certain direction. It is suitable for all kinds of peculiar bottles. It can be set as stand-alone operation, or integrated with the production line. DASE-SING i-Vision has a simple appearance and small footprint.
Multi-deck Cold / Hot Forming Machine
Categories : Compression Molding Machines
1. Capable of multi-layer production simultaneously to increase productivity and reduce the footprint and energy consumption. 2. Suitable for: rubber, composite parts, carbon fiber. 3. Multi-layer design with air cylinder for mold movement to increase productivity.
SINGLE INJECTION MOLD
Categories : Injection Molds
Single Injection Molding is a standard process that YOMURA TECHNOLOGIES excels at. Our YangMei plant is equipped with a resin feeder system to increase yield rates for mass volume production. Material: TPR , PC, PC/ABS, ABS ADVANTAGES: Works with Complex Designs Has the Advantages of Both Plastic & Rubber Flexible & Soft Touch
INSERT INJECTION MOLD
Categories : Injection Molds
INSERT MOLDING TECHNOLOGY: When a metal, plastic or ceramic part needs to be embedded in plastic to improve product structure it is called Insert Molding. It is a widely used process and one that YOMURA TECHNOLOGIES specializes in. With Insert Molding, a part is placed in a mold cavity then a selected plastic material is injected directly over it resulting is a single part with the insert(s) encapsulated by the material. This process normally uses engineering plastics for improved wear resistance, tensile strength and weight reduction. Insert Molding can be a highly efficient alternative to the assembly of discrete parts using soldering, connectors, fasteners, or adhesives. It also expands plastic capabilities and can reduce final product cost by limiting the amount of costly metal needed to create a part. And importantly, because we can use conventional single shot injection machines for Insert Molding, tooling costs are lower than with a multi-shot processing. Benefits: Reduced assembly and labor costs Because insert molding joins numerous components with thermoplastic, assembly and labor costs are greatly minimized. For example, a single stamping can be overmolded, then perforated to create multiple circuit paths. Reduced size and weight By eliminating fasteners and connectors, and by combining the physical strength of resin and metal inserts, insert molding yields smaller and lighter components. Increased reliability With every part tightly secured in thermoplastic, an insert molded component prevents part loosening, misalignment, improper terminations, and other problems. The thermoplastic resin also provides improved resistance to shock and vibration. Increased design flexibility Designers appreciate the virtually unlimited configurations that insert molding allows. For example, in creating a 3D circuit board, overmolding permits circuitry to move freely through the part, from inside to outside, up walls, down in holes-and the plastic ties it all together. Materials: Engineering plastic or Thermo Plastic Rubber (TPR) inserted with metal frame die casting, plated copper pin, sockets, wire frames, etc. Applications: TPR + Metal Frame(3C Mechanical Parts) ABS + Al. Die Cast (Sports/ Medical) Eng. Plastic + Patting Pin/Eng. Plastic + Wireframe (Connector) Eng. Plastic + Copper Pin/Contact (Precision Electronic Component)
PVC、EVA、PP/PE + CaCo3、LSNH PVC+NBR、TPR Compounding System
Categories : Pelletizing & Compounding Lines
•Pellets for Medical Tubes •Injection Tube (Medical Use) •Cable & Wire Pellets (LSNH) •Cable & Wire
PVC TPR Adhering Machine Of Car Mat
PVC TPR adhering machine of car mat Whole plant equipment includes extruding system,T-mold, adhering molding machine, and rack of carpet, which are available for car mat, clear board.
