English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
Taper Screw Batch Pre-former
Categories : Dryers and Dehumidifiers
FUNCTION: This uniquely designed Taper Twin Screw Extruder has a large volume open top hopper, which will accept a whole batch from your mixer without performing. The twin screws continuously and automatically bite and feed the compound, which then is extruded through a die. This simple but effective feeder, allows you to eliminate many labor intensive material handing processes, between your mixer and existing conventional extruders or other equipments.. BENEFITS: Large volume hopper capacity Exceptional cooling and temperature control Full and easy access for cleaning Simple, automatic and continuous operation Easy maintenance Cost effective and affordable
STRETCH FILM LDPE/LLDPE PLASTIC INFLATION MAKING MACHINE : KML-45S/55S
Categories : Blown Film Extruders
The KML-45S/55S is a stretch film plastic inflation making machine that converts LDPE/LLDPE pellets into stretch film through blown film extrusion, with adjustable film thickness and width.The KML-45S runs an Ø45mm screw at a 30:1 L/D ratio with a 20 HP AC driving motor, producing film up to 600 mm wide at 20-55 kgs/hr; the KML-55S runs an Ø55mm screw at the same ratio with a 30 HP AC driving motor, producing film up to 900 mm wide at 30-72 kgs/hr. Both models include an auto tension controller, waste collecting winder, and adhesives auto-feeder.Models: KML-45S / KML-55SSuitable material: LDPE/LLDPE (both)Film thickness: 0.008-0.10 mm (both)Film width range: KML-45S 600 mm; KML-55S 900 mmFilm output: KML-45S 20-55 kgs/hr; KML-55S 30-72 kgs/hrScrew diameter/type: KML-45S Ø45mm; KML-55S Ø55mm (L/D ratio 30:1 both)Driving motor: KML-45S AC 20 HP + Inverter; KML-55S AC 30 HP + InverterEquipment: Auto tension controller, waste collecting winder, adhesives auto-feederTake-up speed: KML-45S 75 m/min; KML-55S 65 m/min
Single Screw Feeder-PSA
Categories : Dosing and Measuring Equipment
The PSA series single-screw feeder was developed by Sino-Alloy Machinery as an important accessory to their extruder line. Its design is based on Sino-Alloy’s years of experience. The PSA single-screw feeder has a large feeding screw chamber for a smooth flow of the feeding material. Options include standard double-flight, single-flight, T-type, and spring type screws, which can be swapped easily and quickly to match the feeding material. The advantages of the intermeshed type of screw pairs are powerful displacement right-angle conveying, self-cleaning of the screws, high feed volume, and stable feeding. Sino-Alloy can also tailor the design of the feeder to match extruders from other manufacturers. Customers can also specify options such as premix, vibrate, preheat or cooling to suit production demands.
Side Force Feeder Type Double Section Recycling Pelletizing Extrusion Line | CK-SFD
Categories : Pelletizing & Compounding Lines
CK-SFD series Side Force Feeder Type Plastic Recycling Pelletizing Line is ideal for recycling dirty plastic crushed films. Possible materials : EPE, EPP, EPS, PP, HDPE, LDPE, ABS, PS crushed films or flakes.
Side Force Feeder Type Recycling Pelletizing Extrusion Line | CK-SF
Categories : Pelletizing & Compounding Lines
CK-SF series Side Force Feeder Type Plastic Recycling Pelletizing Line is ideal for recycling clean or washed plastic crushed films. Possible materials : EPE, EPP, EPS, PP, HDPE, LDPE, ABS, PS crushed films.
Side Feeder / Side Feeder Twin Screw
Categories : Dosing and Measuring Equipment
CYKF developed its own twin screw side feeder to enable the feeding of additives and fillers, such as glass fiber, CaCO3, TiO2, Talc, fire retardant, etc. Materials in powder or pellet are all acceptable. Our rich experiences in plastic extrusion help us catch the critical design points to satisfy different production requirements.
Side Sealing Bag Making Machine (GF-32SE/SV)
Categories : Plastic Bag Making Machines
The GF-32SE/SV is a servo-driven side sealing bag making machine, the machine type used for clear packaging bags, garment bags and similar side-sealed formats. Within the series — GF-24SE/SV, GF-32SE/SV, GF-40SE/SV and GF-50SE/SV, with matching GF-S600/SV to GF-S1200/SV models — the GF-32SE/SV has a cutting width of 800 mm and a cutting length of 800 mm, on film from 0.01 - 0.1 mm. Production is Max. 200 Cycles/Min for the SE model and Max. 150 Cycles/Min for the S model.The rear feeder is supplied with gusset, fold, slitter and adhesive tape applicator functions, the control panel uses an HMI, and the servo drive is YASKAWA/JAPAN with a SICK/GERMANY printing scanner. A conveying belt and collecting table are included. Options extend the machine to tension control, EPC, a triangle folding device, punch hole and Mexican hat punch devices, ultrasonic sealing, a perforating sealing knife, an envelope punching mold and an automatic stacking table.Type: side sealing bag making machine, servo driveSeries: GF-24SE/SV, GF-32SE/SV, GF-40SE/SV, GF-50SE/SV (GF-S600/SV to GF-S1200/SV)Cutting width: 800 mm; cutting length: 800 mmFilm thickness: 0.01 - 0.1 mmProduction: SE model Max. 200 Cycles/Min; S model Max. 150 Cycles/MinRear feeder with gusset / fold / slitter / adhesive tape applicator; HMI control; servo YASKAWA/JAPAN; printing scanner SICK/GERMANYOptions: tension control, EPC, triangle folding, punch hole, Mexican hat punch, ultrasonic sealing, perforating sealing knife, envelope punching mold, automatic stacking table
Automatic Batch Weighing and Mixing System
Categories : Dosing and Measuring Equipment
Automatically measuring equipment for efficient mix and material processing. Equip with auto conveying system, batching system, mixer, kneader, extruder and steel construction plant. Discharge feeder: scale screw feeder Automatically conveys material to extruder after mixing PC control monitoring system live network Complete installation of pulverizer series
Master-batch Feeder (MF)
Categories : Dosing and Measuring Equipment
The masterbatch mixes with your virgin resin at the machine hopper automatically. You don't need to pre-color nor pre-mix your resin anymore. It saves the manpower, resin, stock costs, and keeps working environment clean. The unit mixes and doses masterbatch, additives, free flowing powders, regrinded and virgin resin to ensure consistent and accurate mixing which results in better quality of product and less rejects. With the special process, the internal part of the unit has no dead corners and makes the dosing process more accurate. Both dosing-cylinder and dosing-screw can be easily changed. The motor feedback control is operated by the tacho-generator which will not be influenced by power fluctuations. It gives the utmost accurate dosing. If some reasons changed R.P.M. of the extruder after setting, the unit will automatically to be changed by the percentage of new R.P.M. By just entering the weight of the materials, screw back time, dosing capacity per turn and additional rate of the masterbatch, the CPU will calculate proper R.P.M. rate automatically. The control panel is user friendly & much more accurate. Besides, it also has the function to store up to 10 sets of R.P.M. setting. To work with the injection molding machines, the unit is also equipped with a timer to control the dosing time.
Water Cooling Type Plastic Film Recycling Machine (GSR-100)
Categories : Recycling Lines by Application
The GSR-100 is the 100 mm size in JANDI'S GSR water cooling type plastic film recycling series for HD, LD and LLDPE and P.P. scrap. A spiral feeder delivers film into the 100 mm extruder, which is driven by a 60 HP motor; the melt passes a screen changer driven by an A.C. motor with reducer and leaves through a spaghetti type die head into a stainless steel water tank, where the strands are cooled before being blown dry and pelletized by a rotary cutter with fixed blade. Maximum capacity is 190KG/ HR.The GSR-100 sits between the GSR-85 and GSR-120 in a series of six sizes, from the GSR-45 with a 45 mm extruder and 15 HP motor to the GSR-150 with a 150 mm extruder and 100 HP motor. Control is from an independent switch board. The option list is shared across the series: conveyor with metal detector, crusher, screw conveyor, vacuum pump, pressure gauge, hydraulic screen changer, second extruder, vibrating screen, and air blower with storage tank.Type: water cooling (spaghetti type) plastic film recycling machineMaterial: HD/LD/LLDPE & P.P.Extruder: 100 mm; driving motor 60 HPMax. capacity: 190KG/ HRFeeding: spiral feeder; screen changer driven by A.C. motor with reducer; spaghetti type die headStainless steel water tank and blower; rotary cutter with fixed bladeSeries: GSR-45 (45 mm, 15 HP) to GSR-150 (150 mm, 100 HP); options: conveyor with metal detector, crusher, hydraulic screen changer, 2nd extruder, vibrating screen
Water Cooling Type Plastic Film Recycling Machine (GSR-85)
Categories : Recycling Lines by Application
The GSR-85 is a water cooling type plastic film recycling machine for HD, LD and LLDPE and P.P. scrap. Film is fed by a spiral feeder into an 85 mm extruder driven by a 40 HP motor, passes a screen changer driven by an A.C. motor with reducer, and is extruded through a spaghetti type die head into a stainless steel water tank. The cooled strands are blown dry and cut by a pull and cutting unit with a rotary cutter and fixed blade, at a maximum capacity of 120 KG/HR.The GSR-85 is the mid-size machine in a series that runs from the GSR-45 to the GSR-150, with extruder sizes from 45 mm to 150 mm and driving motors from 15 HP to 100 HP. All sizes are controlled from an independent switch board. Options include a conveyor with metal detector, crusher, screw conveyor, vacuum pump, pressure gauge, hydraulic screen changer, second extruder, vibrating screen, and an air blower with storage tank.Type: water cooling (spaghetti type) plastic film recycling machineMaterial: HD/LD/LLDPE & P.P.Extruder: 85 mm; driving motor 40 HPMax. capacity: 120 KG/HRFeeding: spiral feeder; screen changer driven by A.C. motor with reducer; spaghetti type die headStainless steel water tank and blower; pull and cutting unit with rotary cutter and fixed bladeSeries: GSR-45 to GSR-150 (45 mm to 150 mm, 15 HP to 100 HP); options: conveyor with metal detector, crusher, hydraulic screen changer, 2nd extruder, vibrating screen
Film Extrusion Molding Machine Auxiliary Solutions
Categories : Turnkey & Auxiliary Integration Solutions
We have a wide range of auxiliary equipment for film extrusion molding mechines, like hopper dryers, dehumidifying dryers, chillers, PET crystallizers, vacuum loaders, mold temperature controllers, master-bacth feeders and auto dosing and mixing systems. Better company image Greater productivity Lower cost Better energy efficiency Less material waste and pollution during the conveying process Better working environment Less noise due to the separation of the blowers from the working place
Feeder-Ruder Pellet Making Extruder
Categories : Pelletizing & Compounding Lines
Extrusion & Pelletizing for Rubber、Plastic & Chemical Industries This new model Feeder-Ruder Pellet Making Extruder usage for extruding and pellet making after Plastic or Rubber compound mixing in the Dispersion Kneader and conveying to the hopper of this machine. Pellets making method with mold Hot Face Cutting and Water ring cutting two kind.
4.0G 10 Heads Multihead Weigher (3L)
Categories : Dosing and Measuring Equipment
Multihead Weigher Working Principle The multihead weigher or computer combination weigher usually uses different weigh heads to measure the precise weight of the products. After the product is fed into the top of the multihead combination weigher, the internal distribution system of the weigher starts working. This system distributes the product. With the help of linear feed plates, different linear feeders will deliver some product into the feed hopper. For example, if you are using a 14-head multihead weigher machine, there will normally be 14 linear feeders that will deliver products to 14 feed hoppers. After the products are delivered to the hopper, the load cell begins to calculate the weight of the product in the weigh hopper, and the processor in the multihead weigher then calculates the best combination of available weights needed to achieve the desired target weight.
Single Screw Type Loss-in-Weight Feeder
Categories : Dosing and Measuring Equipment
Loss-In-Weight Feeder is a precision feeding device designed specifically for handling granular or free-flowing powdered materials. Utilizing advanced technology, this feeder is capable of delivering maximum accuracy at minimal feed rates, meeting the precise ingredient requirements in different industries.
Loss-In-Weight Feeder
Categories : Dosing and Measuring Equipment
Loss-in-weight feeder is a gravimetric metering device that provides continued feeding without cause batch problems. The feeder receives constant feedback from the sensor to ensure the materials are delivered in a precise amount that saves manpower successfully. CYKF provides different types of loss-in-weight feeders, including single screw, twin screw, and the models for feeding liquids. Various sizes and configurations are available to satisfy wide applications. Our team equipped with both profession and experience in the field of plastic extrusion. We provide suggestions and service for equipment integration to help customers save more money and get higher profits.
Large-flow Twin Screw Feeder
Categories : Dosing and Measuring Equipment
Large-flow Twin Screw Feeder
Injection Molding Machine Plastic Auxiliary Solutions
Categories : Turnkey & Auxiliary Integration Solutions
YANN BANG offers a wide range of auxiliary equipment specificaly for injection molding mechines, like hopper dryers, dehumidifying dryers, chillers, PET crystallizers, vacuum loaders, mold temperature controllers, master-bacth feeders and auto dosing and mixing systems. Better company image Greater productivity Lower cost Better energy efficiency Less material waste and pollution during the conveying process Better working environment Less noise due to the separation of the blowers from the working place
Gravimetric Auto Dosing & Mixing System (ADMG)
Categories : Dosing and Measuring Equipment
COST SAVE: ADMG can measure powder resin, granule resin, master-batch, or additive precisely. EASY OPERATE: By entering the percentage of each batch and supply value to operate effectively, HMI automatically calculates all required values operate and monitor by single personnel or connect a PC through a modern to through a modern to maintain the system or solve problem. HMI is dynamic and versatile to provide the most efficient and economic operation. ACCURACY & CONSISTENCY: ADMG automatically measures the required amount accumulatively in order when you add extra resins or additives which will not affect the precision of dosing or mixing. ERROR REPORT: Error problems are recorded the time by day, month, and year for the maintenance. EASY CLEAN & SPACE SAVE: Stainless design and individual function units are easy to discharge and install.
Gravimetric Blenders - SGB
Categories : Dosing and Measuring Equipment
• Evenly mixing of materials after accurately weighing, control accuracy strictly of ±0.1~±0.3%. • Auto calibration after each material weighting ensures accuracy. • Up to 100 recipes can be stored for later use. • Alarm log function. • All parts detachable for easy cleaning. • For SGB-600 and models below, machine mount model is the standard supply (equipped with magnetic base,manual discharge valve), optional pneumatic slide gate is available also. • For SGB-2000 and models above, floor stand is the standard supply (equipped with moveable floor stand, storage hopper and pneumatic slide gate), optional SBU suction box is available also. • Has the function of recycled material compensation (recycling hopper is standardly equipped with low level switch). Aberration coompensation can be automatically calculated based to the feeding amount of recycled materials. • Memory card can be optional selected to store ratio information for product quality control. • Hopper low level sensor can be optional selected to send alarm when material is insufficent. • Optional analog signals (0~10V) output function for screw automatic adjusting of extrusion molding machine. • RS485 communication is optional to realize the centralized monitoring of connecting with molding machine. • Floor stand, pneumatic slide gate, storage bin and suction box should be optionally purchased for floor mounting. (Applicable for SGB-600 and models below)
Gravimetric Doser SGD
Categories : Dosing and Measuring Equipment
SGD gravimetric doser is suitable for continues precision dosing of masterbatch to the plastic process machine. The unit has a selection of four dosing screw sizes for different throughput needs. The unit can supports up to two sets of dosing screws for various material receipt. The lose-it-weight technology allows doser to measure and correct dosing to realize constant dosing precision. SGD syncronize dosing speed in extruder mode via analog 0~10V input from the extruder. Combination of Shini VL venturi loader realizes auto conveying of material to SGD at all time.
Feeder-Ruder Pellet Making Extruder
Categories : Pelletizing & Compounding Lines
This new model Feeder-Ruder Pellet Making Extruder usage for extruding and pellet making after Plastic or Rubber compound mixing in the Dispersion Kneader and conveying to the hopper of this machine. Pellets making method with mold Hot Face Cutting and Water ring cutting two kind.
Feeder-Ruder Pellet Making Extruder
Categories : Pelletizing & Compounding Lines
This new model Feeder-Ruder Pellet Extruder usage for extruding and pellet producing after Plastic or Rubber compound mixing in the Dispersion Kneader and conveying to the hopper of this machine. Pellets making method with mold Hot Face Cutting and Water ring cutting two kind..
Blow Molding Machine Plastic Auxiliary Solutions
Categories : Turnkey & Auxiliary Integration Solutions
For blow molding mechines, we can supply a wide variety of auxiliary equipment, e.g.: hopper dryers, dehumidifying dryers, chillers, PET crystallizers, vacuum loaders, mold temperature controllers, master-bacth feeders and auto dosing and mixing systems. Better company image Greater productivity Lower cost Better energy efficiency Less material waste and pollution during the conveying process Better working environment Less noise due to the separation of the blowers from the working place
Belt Type
Categories : Dosing and Measuring Equipment
Loss-In-Weight Feeder is a precision feeding device designed specifically for handling granular or free-flowing powdered materials. Utilizing advanced technology, this feeder is capable of delivering maximum accuracy at minimal feed rates, meeting the precise ingredient requirements in different industries.
Knife-Cutting Bag Making Machine (GF-A812E-SV+C)
Categories : Cutting Machines
The GF-A812E-SV+C is a servo-driven knife-cutting bag making machine for bottom sealing bags. In the single-deck GF-A812E/SV configuration it makes 2 x 400 mm W bags or 1 x 800 mm W bags with a cutting width of 850 mm and a cutting length of 1200 mm, on film from 0.01 - 0.1 mm thick. The rear feeder is controlled by feeding sensors, sealing is a single sealing line with one sealing knife, and cutting is by a separate cutting knife.The machine is controlled through an HMI panel with a YASKAWA servo drive from Japan, and automatic stacking is standard. The same series extends to double-deck, triple-deck and 4-deck models — for example the GF-A824E/SV, GF-A836E/SV and GF-A848E/SV — for higher output from one footprint, with special designs available upon request. Options include a hole punch device, printing scanner and automatic punch unit.Type: knife-cutting bag making machine, bottom sealing bagSingle-deck model GF-A812E/SV: 2 x 400 mm W or 1 x 800 mm WCutting width: 850 mm; cutting length: 1200 mmFilm thickness: 0.01 - 0.1 mmRear feeder controlled by feeding sensors; 1 sealing knife, single sealing line; 1 cutting knifeControl: HMI; servo drive YASKAWA / JAPAN; automatic stackingMulti-deck versions: double, triple and 4-deck models; options: hole punch device, printing scanner, auto punch unit
Side Sealing Bag Making Machine Biodegradable Material(GF-S/SV Series)
Categories : Plastic Bag Making Machines
The GF-S/SV Series is a side sealing bag making machine configured for biodegradable material. It is the biodegradable-film version of JANDI'S GF-S/SV and SE/SV side sealers: folded or tubular film is sealed and cut along the side to make side-seal bags from PLA and PBAT based film.The GF-S/SV layout includes a rear feeder with gusset, fold, slitter and adhesive tape applicator functions, a servo drive, an HMI control panel, a printing scanner, a conveying belt and a collecting table. Options in the range include tension control, EPC edge guiding, a triangle folding device, punch hole and Mexican-hat punch devices, ultrasonic sealing, a perforating sealing knife, an envelope punching mould and an automatic stacking table. Cutting width, cutting length, film thickness range and production speed are confirmed at quotation.Type: side sealing bag making machine for biodegradable material, GF-S/SV SeriesMaterial: PLA and PBAT based biodegradable filmServo drive with HMI control panelRear feeder: gusset, fold, slitter, adhesive tape applicatorPrinting scanner, conveying belt and collecting tableOptions: tension control, EPC, triangle folding, punch hole, Mexican-hat punchOptions: ultrasonic sealing, perforating sealing knife, envelope punching mould, automatic stacking tableCutting width, length, film thickness and speed confirmed at quotation
Master-batch Feeder for Powder (MFP)
Categories : Dosing and Measuring Equipment
Easy operation: Enter the weight of the resins, screw back time, dosing capacity per turn and additional rate of the masterbatch, it will calculate proper R.P.M. rate automatically. The function is available to store up to 10 sets of R.P.M. Setting memory. Flexible extension: Each feeder controls and operates individually. It is easy to add extra a feeder or change the type of screw later. A dosing and mixing system of various resins is available for your early inquiry. Precise calculation: With the special process, the internal part of the unit has no dead corners and makes the dosing process more accurate.
Eddy Current Non-Ferrous Metal Separator Line
Categories : Washing & Classifying Lines
Rey Long's JLECS-1000W is a complete non-ferrous metal separation line combining three stages in one system: a vibratory feeder for material distribution, a high-intensity magnetic drum separator for ferrous removal, and an eddy current magnetic roller for precise non-ferrous metal recovery. Ideal for recycling plants, e-waste processing, and mixed-material sorting.
High Pressure Liquid Injector-PSX
Categories : Machine-Specific Spare Parts
The PSX high-pressure liquid injector was developed by Sino-Alloy Machinery as an important accessory to their extruder line. The PSX high-pressure liquid injector is made up of a storage tank, proprietary precision plunger pump, and one-way valve type fluid injector. It can generate pressures as high as 50 kg/cm. This feeder can be connected to any feeding port of the extruder. The PSX high-pressure liquid injector is also capable of injecting high pressure gases or super-fluid liquids. Not only is it suitable for the injection of liquid and gaseous additives in rubber or plastics materials, but also for may plastic and rubber reactive processes or the injection of liquid ingredients in food and pharmaceutical. The PSX high-pressure liquid injector can also be supplied with heating and insulation devices, loss-in-weight metering devices, or flow controllers for precise measurements of the input quantity.
Spaghetti Type Recycling Machine(GSR Series)
Categories : Recycling Lines by Application
The GSR Series is JANDI'S water cooling, spaghetti type recycling machine for polyethylene and polypropylene film scrap. Film is fed by a spiral feeder into the extruder, and the melt is extruded through a spaghetti type die head into strands; the strands are cooled in a stainless steel water tank, dried by a blower and cut into pellets by a pull and cutting unit with a rotary cutter and fixed blade. A screen changer driven by an AC motor with reducer filters the melt ahead of the die.The series covers a range of extruder sizes and motor ratings so that capacity can be matched to the scrap volume of a film or bag plant; the figures for each model are listed per model in JANDI'S GSR specification table. Options include a conveyor with metal detector, crusher, screw conveyor, vacuum pump, pressure gauge, hydraulic screen changer, second extruder, vibrating screen and an air blower with storage tank. Details are available with quotation.Type: water cooling, spaghetti type recycling machine, GSR SeriesMaterial: HD/LD/LLDPE and PP film scrapSpiral feeder into the extruderScreen changer driven by AC motor with reducerSpaghetti type die head, stainless steel water tank and blowerPull and cutting unit with rotary cutter and fixed bladeOptions: conveyor with metal detector, crusher, screw conveyor, vacuum pump, hydraulic screen changer, second extruder, vibrating screenExtruder size and capacity per model, confirmed at quotation
Liquid Feeder
Categories : Dosing and Measuring Equipment
Quantitative constantly speed for conveying liquid, emulsion and oil. Accuracy up to ±0.5% ~ 1%. Machine only contacts with the hose which can be used for corrosive liquids. Hoses are easy to replace and reduce contamination after cleaning. The industrial 4.0 model which is used RS485 MODBUS. Easy to connect the computer, man-machine interface, PLC and other connections. ※ Speed and the hose will affect the accuracy.
Die Face Cutting Type Recycling Machine(GHR Series)
Categories : Recycling Lines by Application
The GHR series is a die face cutting type plastic film recycling machine for HD, LD and LLDPE and P.P. film scrap, producing pellets that can go back into the extruder. Scrap is fed into a stainless steel densifying tank with rotary cutters, then extruded through a hydraulic screen changer and cut at the die face; the pellets are dried in a stainless steel centrifuge unit and collected in a stainless steel storage unit. The series covers extruder sizes of 65 mm, 85 mm, 100 mm and 120 mm.Motors with inverter are 50 HP, 75 HP, 100 HP and 125 HP across the four sizes, for maximum capacities of 120 KG/HR, 200 KG/HR, 300 KG/HR and 400 KG/HR. Options include a conveyor with metal detector, crusher, screw conveyor, vacuum pump, pressure gauge, second extruder, film roll feeder and vibrating screen. JANDI'S notes that adding a crusher makes it easier to handle scrap of different sizes such as loose film and die-cut waste, gives a more even temperature in the densifying stage, and results in more stable feeding, more stable extrusion output and more uniform pellet sizes.Type: die face cutting type plastic film recycling machineMaterial: HD/LD/LLDPE & P.P.Models: GHR65E, GHR-85E, GHR-100E, GHR-120E; extruder 65 mm, 85 mm, 100 mm, 120 mmMotor with inverter: 50 HP, 75 HP, 100 HP, 125 HPMax. capacity: 120 KG/HR, 200 KG/HR, 300 KG/HR, 400 KG/HRDensifying tank with rotary cutters, hydraulic screen changer, centrifuge drying unit and storage unit in stainless steelOptions: conveyor with metal detector, crusher, screw conveyor, vacuum pump, 2nd extruder, film roll feeder, vibrating screen
Side Sealing Bag Making Machine(GF-S/SV Series)
Categories : Cutting Machines
The GF-S/SV series is JANDI'S range of servo-driven side sealing bag making machines, covering four cutting widths so that a converter can match the machine to its bag sizes. The GF-24SE/SV pairs with the GF-S600/SV at 600 mm cutting width, followed by the GF-32SE/SV and GF-S800/SV at 800 mm, the GF-40SE/SV and GF-S1000/SV at 1000 mm, and the GF-50SE/SV and GF-S1200/SV at 1200 mm. Cutting length is 800 mm across the series, on film from 0.01 - 0.1 mm.SE models run at Max. 200 Cycles/Min and S models at Max. 150 Cycles/Min. Every machine in the series carries a rear feeder with gusset, fold, slitter and adhesive tape applicator, HMI control, a YASKAWA/JAPAN servo drive, a SICK/GERMANY printing scanner, a conveying belt and a collecting table. Optional equipment includes tension control, EPC, a triangle folding device, punch hole and Mexican hat punch devices, ultrasonic sealing, a perforating sealing knife, an envelope punching mold and an automatic stacking table.Type: side sealing bag making machine series, servo driveCutting widths: 600 mm (GF-24SE/SV, GF-S600/SV), 800 mm (GF-32SE/SV, GF-S800/SV), 1000 mm (GF-40SE/SV, GF-S1000/SV), 1200 mm (GF-50SE/SV, GF-S1200/SV)Cutting length: 800 mm; film thickness 0.01 - 0.1 mmProduction: SE model Max. 200 Cycles/Min; S model Max. 150 Cycles/MinStandard: rear feeder with gusset / fold / slitter / adhesive tape applicator, HMI, servo YASKAWA/JAPAN, printing scanner SICK/GERMANY, conveying belt, collecting tableOptions: tension control, EPC, triangle folding, punch hole, Mexican hat punch, ultrasonic sealing, perforating knife, envelope punching mold, automatic stacking table
Extrusion Molding Machine Plastic Auxiliary Solutions
Categories : Turnkey & Auxiliary Integration Solutions
We are capable of offerring a wide range of auxiliary equipment specificaly for extrusion molding mechines, like hopper dryers, dehumidifying dryers, chillers, PET crystallizers, vacuum loaders, mold temperature controllers, master-bacth feeders and auto dosing and mixing systems. Better company image Greater productivity Lower cost Better energy efficiency Less material waste and pollution during the conveying process Better working environment Less noise due to the separation of the blowers from the working place