English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
Triple Extruder Machine (YSJ)
Categories : Extrusion Lamination Machines
● Working Material: BOPP film, CPP film, PET film, Cellophane, Aluminum foil, Paper, Non-woven fabric, PE film, Nylon film ● Resin: PP / LDPE / LLDPE / EVA / EAA / SURLYN
Onion Bag Machine
Categories : Industrial Knitting Machines
For special wide nets. •For double layered nets.
4 In One Side Sealing Bag Making Machine with Servo Motor Control Model: CW-PFM-SV
Categories : Plastic Bag Making Machines
Full Automatic Side Sealing Soft Loop Handle, Draw Tape, Die Cut & Patch Handle Bag Making Machine by Servo Motor Control.
Control Panel
Categories : Mold Parts
The easy to use control panel offers a simple interface to monitor and control operations of the Quick Mold Change System. The upper half of the screen displays automatic functions while the lower half can be used for operator-controlled functions. This makes this machine easy to control yet still have the functionality needed of a Quick Mold Change System.
Hot Runner Temperature Controller Chassis Series - TC5E
Categories : Control Equipment
High-grade aluminum frame design Stackable design, installation space saved The steel handle for move easily Built-in NFB switch Fan built-in for heat sink Euro type multi-pole connector apply, the quality stable Terminal and wire crimped by auto machine, the quality stable Universal standardized chassis for any brand of module Arico
Single Shaft Shredder (Kroko Series)
Categories : Plastic/Rubber Shredder
Cost Effective Precision Installed with STM gearbox made from Italy. Ensure the best effective precision and the higher torque density. High radial loads with high efficiency and great stability Equipped with professionally designed shaft and blades, it can withstand higher radial load and create higher efficiency while keep the best stability. GENIUS
Powder Vacuum Loader
Categories : Loading and Conveying Machines
Powder Vacuum Loader It’s “trend of the time” by using recycled material in the manufacturing process and absolutely necessary. Considering of create much dust after granulating the recycled material, re-manufacturing with dust to cause raw material waste and burned the motor. To increase the operator health problem and environment pollution. The system composes by suction hopper of powder & floor type vacuum loader with patented vortex cyclone and air filter double pieces. It’s great idea to prevent the dust leakage and air pollution under
Precision Hydraulic Automatic Die-cutting Machine/4 columns Type SC-550
Categories : Foaming Machinery
Advanced & durable hydraulic circuit and steady electronic control system circuits adopted in the hydraulic system enable to achieve high operating performance.
WPC PROFILE EXTRUSION LINE - PE/PP/PS/TPE/PVC
Categories : Extrusion Lines For Pipes and Profiles
The WPC profile extrusion line is a set of machines used in the production of WPC boards. Differences between WPC profile extrusion and general profile extrusion WPC profile extrusion machine is different from general profile extrusion machine, It has to maximize mixing while minimizing damage to the biomass furnish because the WPC material involves two different types of materials: wood and plastic. It is more accurate processing temperature, melt flow index, etc. are required. The same is that general profile extrusion is a process by which various plastic materials are used to develop quality plastic products that have a feature of continuous (ex: plastic board) but do not include sheet or film products. How does WPC profile extrusion line work? The process of WPC profile extrusion begins with the mixing of wood powder and plastic in the mixer. The ratio of wood powder to plastic varies depending on the desired strength and durability of the final product. Once the mixture is blended, it is fed into the conical twin-screw extruder. The extruder has two screws that rotate in opposite directions, pushing the mixture through a barrel and melting it. The molten mixture is then pushed through a die that determines the shape and size of the extruded profile. The extruded profile is then passed through the vacuum calibration table, which cools it and sets its shape. The haul-off machine pulls the profile through the calibration table, maintaining its shape and ensuring its dimensions are correct. The cutting machine cuts the profile to the desired length, and the stacker stacks the finished product. Advantages of WPC profile extrusion line Efficient and consistent production of high-quality WPC profile products. The extrusion process ensures that the final product has a uniform shape and size, with consistent mechanical properties. Highly automated, reducing the risk of human error and increasing efficiency. Cheng-Yu Plastic Machine is a professional WPC profile extrusion line manufacturer As demand for sustainable, eco-friendly products continues to grow, the wood-plastic composite (WPC) market is booming. We develop WPC profile extrusion lines for profile manufacturers who need a reliable, efficient, and high-quality production process. It is a versatile and flexible solution for profile manufacturers in various industries.
Instant Recycling System
Categories : Plastic Waste Recycling Machines
In the past, operators throw away the sprues or waste material in small amount or wait for collecting them in big amount to reuse. However, that may be stuck dust by static electricity become too bade to be reused for a while. That not only occupies your space but also costs your time to assort, break plastic nature and regenerate in such long process. Yann Bang “Instant recycling system” use a crusher immediately granulate the sprues, waste material or NG product into small pieces as recycled material that be mixed with virgin material by a proportional valve in right proportion. The recycling process helps you cost down material outlay without effected quality. Small size with low noise and low power consumption is great for long hour operation. A small automatic peripheral instant recycling system for you molding machine combine with four individual equipments: crusher, automatic vacuum loader, hopper dryer and proportional valve. Also can be used with a robot or belt conveyor. The main function is to mix the granulated waste directly from the injection molding machine and the virgin material with a right proportion. Benefit you with less material ware and pollution for your standard productions. 1. Auto instant recycling system can recycle, convey and dry the granulated material sequentially. 2. Less noise and less dust to keep your working area clean. 3. Compact size, light weight and easy-to move. 4. Accurate mixing proportion for good quality. 5. Instant recycling provides the high-efficient productivity and save material cost.
Tensile Strength Tester
Categories : Dosing and Measuring Equipment
The GT-7010AEP is specially designed for measuring the strength of PP/HDPE flat yarn.
6 COLORS FLEXO PRINTING MACHINE (STANDARD TYPE)
Categories : Flexographic Printing Machines
These flexographic printers are able to print in six colors with the following possibility: 0+6, 1+5, 2+4, 3+3 Max. printing speed 60-70 mts/min Standard printing length is max. 800 mm, bigger printing length can be requested as your demand We didn’t show all our models, please don’t hesitate to contact us for bigger printing machines.
KT Series Injection Molding Machine (STANDARD)
Categories : Vertical Injection Molding Machines
Vertical Injection Molding Machine
Proportional Solenoid Valve 0-310L/min
Categories : Separators
Product Serial: KLPV-HP We offer high flow small size proportional valves. This non-spool design uses a moving part to ensure frictionless performance and a lifespan of up to 10 million cycles. This design ensures easy maintenance and cleaning. Our valve bodies are resistant to high and low temperatures, showing the same performance in different environments, suitable for air, oil, hydrogen, oxygen. Mounting options provide in-line and manifold options.
D-2 Electronics Type AVR / Stabilizer (NU)
Categories : Electrical and Control Systems
Specially for automatic control and distribution panel Compact size NU series electronic Automatic Voltage Regulator is in all-electronic automatic control. It is featured with rapid voltage regulation, frequency wave of output is same as input, free of distortion and has very wide input range. It can absorb surge instantly and there is perfect protecting devices that is suitable for area with instable voltage or where steady voltage required.
Ultrasonic Metal Welding Machine KWG2620-E
Categories : Automatic Welding Machine
Ultrasonic metal welding, generally for the fusion of low melting point metal materials such as copper, aluminum, etc. Taking the ultrasonic welding metal plate as an example, the two metal plates are overlapped and placed on the base, and the ultrasonic welding head is pressed against the coincident metal plate with appropriate pressure, and a lateral vibration of 20,000 to 40,000 times per second is applied. The two metal plate joints are subjected to high frequency vibration friction and welded. In this welding mode, the solvent is not required, and the welding portion does not need to pass current and heat, and is close to the cold joint, and the intermetallic compound is less likely to occur, and the structure changes little. The welding feature is that the deformation of the joint is less, the material is not melted, and the thermal influence of the material is not significantly changed. The fragile cast structure or the intermetallic compound can be obtained, and the fusion of the foil and the small joint can be achieved without strong resistance welding. Long foil can be applied by roller type continuous welding. KWG0935 model can be applied to lithium battery copper aluminum foil and aluminum nickel sheet welding, copper aluminum foil spot welding, capacitor copper aluminum foil spot welding, etc. KWG2020 model can be applied to lithium battery aluminum shell and aluminum nickel sheet welding, wire and terminal welding, wire butt welding, wire and metal plate welding, metal plate spot welding, etc........
Hopper Dryers - SHD-U
Categories : Dryers and Dehumidifiers For Plastic Materials
SHD-U hopper dryer can efficiently dry most of standard hygroscopic plastics as to ensure high quality molding products. The concise structure makes it easy to mount on the IMM, and the drying hopper can also be directly mounted on the floor with the floor stand. Besides, there are multiple optional accessories to meet different production demands, such as hot air recycler, magnetic base and maintenance ladder etc.
Fully Automatic High Speed Disposable Plastic Gloves Making Machine / SSD-800-HGL(Calendar)
Categories : Bag Making Machine by Applications
-Computer control over the entire process -Jumbo film roll to final pruduct ( 2 line output ) , one process flow -Automatically stop when running out of film / film feeding blocks or jam -Automatically tear off the waste edge film -Melting cut-off ( no cutting knife ) system save time and manpower on adjusting knife -Capable to produce 3 types in same machine
Three-Layer Co-Extrusion Blown Film Machine KS-ML3-95-110-95
Categories : Blown Film Extruders
Wide-Width, High-Output Three-Layer Blown Film Solution for Packaging Applications The KS-ML3-95-110-95 Three-Layer Co-Extrusion Blown Film Machine is a high-performance blown film line developed by KUNG HSING Plastic Machinery for lamination films, shrink films, and food packaging applications. By integrating European key components, intelligent control systems, and advanced cooling and thickness measurement technologies, this machine delivers stable production, excellent gauge uniformity, and consistent film quality, even under wide-width and high-output operating conditions.
Quick Die Change System
Categories : Mold Changing Systems
Forwell’s Quick Die Change System is an automatic die changing system that can be specifically designed for hydraulic and mechanical power presses and press production lines. This system automates the die changing process and provides increased speed, efficiency and productivity to a workshop. die casting machine
Fully Automatic Bag Top Hemming Conversion Line (In-Line Process for Cutting-Sewing-Bag Top Hemming For Woven Bag) Model No: HEMITEC
Fully Automatic In-Line Process For Cutting-Sewing-Bag Top Hemming with 22~25 bags/min production capacity. (All-in-One Process from PP Woven Rolls into Finished Bags) Without Bag Top Hemming, the HEMITEC can process for Normal Cutting-Sewing Function with 38~40 bags/min production capacity. Experiencing Clean Process of Bag Top Hemming. Largely Reducing Hand-Touching on the Bag Top Area. Servo Driven Gripper Type Conveying Delivery, Ensuring Neat & Steady Bag Delivery. Saving Manpower and Saving Cultivated Training for Skilled Manuel Operators.
Taper Twin-Screw Sheet Preforming Machine
Categories : Film and Sheet Extrusion Lines
Sheet Pre-forming for Rubber, Plastic & Chemical Industries This new model TAPER TWIN-SCREW SHEETS PREFORMING MACHINE usage for the rubber compound mixing after DISPERSION KNEADER conveying to the hopper of this machine to go extruding and rolling for sheet. This machine not only simply to operate but also upgrading the work efficiency, and may go with the mixer to do the integrated production
Multi Mold Temperature Controller (YMWP)
Categories : Control Equipment
Heat Up & Cool Down Your Mold Without Waiting! YMWP combines a chiller and a mold temperature controller to one. No need to wait or switch either your chiller or your mold temperature controller to cool down or heat up the required temperature. YMWP is different to other generic chillers or mold temperature controllers which can supply cooling water and hot water for your mold at the same time in steady and good condition. Save your energy cost and space. Cool down quickly from 35°C to 10°C in minutes. Use the latest European, American or Japanese compressor and pump. High-efficient transmission function can save up to 25% energy. Excellent stability. Save time to preheat or cool down your mold’s temperature degree. Completed safety protection to lengthen the operating time. Save space and cost. Supply cooling water and hot water (max 180°C) at the same time by the 2-in-1 design.
High Productivity PET Blow Molding Machine L Series
Categories : Horizontal Blow Molding Machines
High Productivity PET Blow Molding Machine
Servo Motor Driven U-Liner Bag Making Machine
Categories : Bag Making Machine by Applications
Servo Motor Driven U-Liner Bag Making Machine
Ultrasonic Metal Welding Machine KWG2620-EW
Categories : Automatic Welding Machine
Ultrasonic metal welding, generally for the fusion of low melting point metal materials such as copper, aluminum, etc. Taking the ultrasonic welding metal plate as an example, the two metal plates are overlapped and placed on the base, and the ultrasonic welding head is pressed against the coincident metal plate with appropriate pressure, and a lateral vibration of 20,000 to 40,000 times per second is applied. The two metal plate joints are subjected to high frequency vibration friction and welded. In this welding mode, the solvent is not required, and the welding portion does not need to pass current and heat, and is close to the cold joint, and the intermetallic compound is less likely to occur, and the structure changes little. The welding feature is that the deformation of the joint is less, the material is not melted, and the thermal influence of the material is not significantly changed. The fragile cast structure or the intermetallic compound can be obtained, and the fusion of the foil and the small joint can be achieved without strong resistance welding. Long foil can be applied by roller type continuous welding. KWG0935 model can be applied to lithium battery copper aluminum foil and aluminum nickel sheet welding, copper aluminum foil spot welding, capacitor copper aluminum foil spot welding, etc. KWG2020 model can be applied to lithium battery aluminum shell and aluminum nickel sheet welding, wire and terminal welding, wire butt welding, wire and metal plate welding, metal plate spot welding, etc........
YHT Manual Spraying Gun
Categories : Hydro Dipping Spraying Equipment
High efficiency spray gun, completely atomizes activator when spraying. Suggest it is used for spraying base coats, clear coats, and activator. Consistent spraying and atomization will provide you excellent result. Cooperate with ： Spraying Booth for base coat and top coat dipping machine
Single Needle Bar Raschel Knitting Machine
Categories : Industrial Knitting Machines
Rugged, distortion - proof welded steel construction. Main drive by special cams, which are dynamically balanced, and run in oil in the machine bed. Machines available for widely different applicants. Applications from fine mesh to coarse mesh available.
Water Chiller (YBW)
Categories : Cooling Equipment / Industrial Chillers
Water Chiller (YBW ) Use the latest European, American or Japanese compressor, available in single and double compressors. The compressors of the double-compressor model can either run alone or together. High-efficient shell-pipe condenser which has heat-transmission function can save energy. Well-designed safety protection. It is also equipped with a digital temperature display indicator and abnormal warning indicators for the long lasting. Applied Machinery: oil temperature, ultrasonic ,high frequency machine／injection ／extrusion／blow molding machine
J Shape Banana Bag Holes Punching and Sealing Machine
Categories : Plastic Bag Making Machines
MGA-17B-700SP (CPP)
Bag Making Machine For Static Shielding Bag -FSC-503-1
Categories : Plastic Bag Making Machines
The FSC-503-1 Static Shielding Bag / Anti-Static Bag Making Machine is designed for producing Static Shielding Bag, Anti Static Bag which protects electronic devices from ESD and electrostatic fields.
