English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
Reel to Reel Printing Line NRP-2012/6C (New Developed Model)
Categories : Flexographic Printing Machines
Reel to Reel Printing Line is the most efficient way for the PP woven bag printing, and capable of two side printing on the bag in the one process, based on the current market demand, we are able to proide 12 colors(each side 6 colors) Reel to Reel Printing Line. Our Reel to Reel Printing Line provide the best printing quality with high output (up to 120 meter / minute) and only one operator required. Decreasing the printing cost to the lowest. It is the most wisdom choice for printing.
Dynisco 1490 – 5 Digit 1/8 DIN Panel Indicator
Categories : Indicators and Sensors
• Universal input • 2 alarm outputs • Retransmission • Min/max valuehold • Modbus communications • Transmitter power supply
Accumulator Head Blow Moulding Machine for L Ring Drum & Open Top Drum
Categories : Blow Molding Machines by Layers
Accumulator Head Blow Moulding Machine for L Ring Drum & Open Top Drum
Three Layer Co-Extrusion ABS Sheet Extrusion Line
Categories : Film and Sheet Extrusion Lines
Three Layer Co-Extrusion ABS Sheet Extrusion Line
4 COLORS FLEXO PRINTING MACHINE (STANDARD TYPE)
Categories : Flexographic Printing Machines
These flexographic printers are able to print in four colors with the following possibility: 0+4, 1+3, 2+2. Max. printing speed 60-70 mts/min Standard printing length is max. 1200mm, bigger printing length can be requested as your demand We didn’t show all our models, please don’t hesitate to contact us for bigger printing machines.
RePet Wood WPC Profile Extrusion Line
Categories : Extrusion Lines For Pipes and Profiles
Green products 100% recyclable & reusable Waterproof / Insetct proof / Anti corrosion Long term service Wood appearance Customization
HOT PLATE PLASTIC PALLET WELDING MACHINE KMH-212 (FRONT-IN FRONT-OUT)
Categories : Automatic Welding Machine
1. Using a hot plate to melt the surface of the welding parts, then forced welding parts to join together. 2. 2. It can meet the requirements of tight joint without damaging the surface of the working piece, and reach to welding effect of waterproof and airproof . 3. Suitable for large or irregular plastic pallet processing. 4. Machine type can be divided into semi-automatic and fully automatic equipment. 5. The pallet feed and collected from the front of machine
Single Shaft Shredder
Categories : Plastic/Rubber Shredder
Single-shaft shredder system can be almost universally used to and are able to process a board range of different materials (woods, copper wire, plastic lump, tire paper, etc.)
KET-100R All-Electric Injection Molding Machine
Categories : Vertical Injection Molding Machines
KETR Series (ROTARY TABLE)
WPC Profile Extrusion Line, WPC Extruder
Categories : Extrusion Lines For Pipes and Profiles
The new plastic-wood composite is similar to wood in look, feeling and smell, but with better performance than wood. Resistant to water, insects, corrosion and mildew. Ideal for applications in high moisture environments...
TR Rotating Clamps
Categories : Mold Parts
The TR system uses a hydraulic mechanism with a 90° turning movement to lock molds and dies into position. This heavy duty Clamping System is available in three different models with a clamping force up to 16 tons.
Central Material Conveying System
Categories : Loading and Conveying Machines
Our central vaccum conveying system also called centralized pneumatic supply system. It can be completely customized to your plastics processing to fullfill the target of continuous operation without downtimes. Central Material Conveying System A central conveying system can control 30 sets of molding machines at the same time and return on your investment in 2-3 years. 1. Better company image 2. Greater productivity 3. Lower cost 4. Better energy efficiency 5. Less material waste and pollution during the conveying process 6. Better working environment 7. Less noise due to the separation of the blowers from the working place
Servo Motor Driven Jumbo Perforating Bag Making Machine
Categories : Plastic Bag Making Machines
Servo Motor Driven Jumbo Perforating Bag Making Machine
PP Woven Bag Related Machinery - JLVFM-SERIES
Categories : Woven Bag Making Machines
“ L ” cutting unit Valve forming unit Display screen operation interface
Ultrasonic Nebulizer KUN-808
Ultrasonic Nebulizer KUN-808 is a professional designed nebulizer, it is suitable for hospital or clinic aerosol therapy.
Taper Screw Batch Pre-former
Categories : Dryers and Dehumidifiers For Plastic Materials
FUNCTION: This uniquely designed Taper Twin Screw Extruder has a large volume open top hopper, which will accept a whole batch from your mixer without performing. The twin screws continuously and automatically bite and feed the compound, which then is extruded through a die. This simple but effective feeder, allows you to eliminate many labor intensive material handing processes, between your mixer and existing conventional extruders or other equipments.. BENEFITS: Large volume hopper capacity Exceptional cooling and temperature control Full and easy access for cleaning Simple, automatic and continuous operation Easy maintenance Cost effective and affordable
Fully Automatic 4/6/8 Tracks T-shirt Bag & Bottom Seal Bag Making Machine SCB-1100-L4/L6/L8
Categories : Bag Making Machine by Applications
Computer control over the entire process From film roll to final pruduct, one process flow Automatically stop when running out of film / film feeding blocks or jam
Stock Blender Rubber Mixing Mill
Categories : Mixers and Blenders
TYPICAL APPLICATIONS The stock blender is installed on the two roll open mixing mill to assist the operator in the mixing of rubber material and chemical power. It features automatic continuous operation, reducing labor requirements, providing safe working conditions, lowering the material temperature, speeding the mix rate and maintaining quality. The action of travel guide holder for the stock blender includes both guide bar type and hydraulic type.
Twin Body Oil Hydraulic Compression Molding Machine - FB SERIES
Categories : Compression Molding Machines
APPLICATIONS: Bakelite, rubber, fiber, brake lining and any kinds of heated compression molding products.
Label Cutting Machines CUT-300/400
Categories : Cutting Machines
This cutting machine can convert shrink sleeve label into pieces for manual application or integrate with rewind unit for automatic application. The cutting system with a pillar type cutting block can apply clean and accurate cuts at high speed. This cutting machine is also equipped with 75˚ and 90˚ horizontal perforation device to make packaging easier to tear. This cutting machine allows shrink sleeve labels to be processed as required and meet manual and automatic application.
All Electric Blow Moulding Machine for 200ml, 500ml Shampoo Bottle
Categories : Electric Blow Molding Machines
All Electric Blow Moulding Machine for 800ml Bottle with view stripe High Efficiency and Eco-Friendly Design The FKI All-Electric HDPE Bottle Making Machine is specifically engineered for producing 200ml and 500ml shampoo bottles from HDPE (High-Density Polyethylene) material. This advanced machine integrates an energy-saving system, drastically reducing power consumption while maintaining high-speed, consistent output. With its fully electric operation, the machine eliminates the need for hydraulic oil, ensuring a cleaner, more sustainable manufacturing environment.
Screws And Barrels For Plastic Injection Molding
Categories : Screws and Barrels
Nan Yun's injection molding screw design team is able to provide ideal screw solutions for injection molding screw application. As the largest screw and barrel manufacture in Taiwan, Nan Yun has invaluable experience on screw barrel design for plastic moulding machine, vertical plastic injection moulding machine. there are more wear and tear on these components for injection moulding machine due to its cycle is longer than the rest of plastic machinery, so that it’s essential to have correct combination of material between screw and barrel for plastic injection molding to ensure a better performance and lasting lifetime.
Inspection Rewinding Machines-INSPECT-V
Categories : Slitters and Rewinders
This inspection rewinding machine for finished roll is designed to handle and inspect rolls of material that have already undergone slitting. It supports quality control process, and enables efficient roll rewinding. Additionally, the function of flag detection feature makes it easier to locate flags and perform corrections as needed. This inspection rewinding machine is critical equipment for ensuring that the finished rolls meet quality standards before being pouched or sent for final use.
PET Blow Mold / PET Preform Mold
Categories : Blow Molding Molds
PET Blow Mold / PET Preform Mold ● Molds are designed for high performance using alloy steels and stainless steels, which guarantee maximum precision, high stability, and long life.
Water Cooling Pelletizer Line (Horizontal Type)
Categories : Plastic Pelletizer Machines
WATER COOLING PELLETIZER LINE (HORIZONTAL TYPE)
8 COLORS FLEXO PRINTING MACHINE (HIGH SPEED TYPE)
Categories : Flexographic Printing Machines
Our machines are suitable to print PP, PE, BOPP, OPP, PE shrinkable film, packing paper, glass paper, non-woven bags. Using hydraulic system to lift up & down the printing cylinders for easy operation. Equipped with meter counter, the machine will stop automatically when reaching the meter. Using high-capacity hot air dryer to make the production faster. The dryer and fan will shut down automatic when machine stops. When machine stops, the ink rolls keep running to avoid drying of ink. The rubber roller is ozone-resistance & solvent-resistance. The ink tray is with cover & faucet. Ink pump, air shaft, ceramic roller & doctor blade etc. are options.
TC5V Valve Gate Controller - 8 Zones
Categories : Control Equipment
Multiple Touch-off signal options ( AC220 / 110 / DC24 / Switch type ) Multiple output voltage options ( AC220 / 110 / DC24 / Relay / MOS Relay ) Time display is adjustable to the first digit after the decimal point Stopwatch can be either accumulative or countdown Three optional control modes Optional pressure retaining mode MOS Relay extension of working life Mechanical Relay ( up to 600 mA ) is optional Arico
Shredder-granulator Combo-GCV Series
Categories : Plastic Crushers
Shredder-granulator Combo GCV series machine is a set of shredding and granulating integrated processing equipment, widely used in a variety of plastic materials. The upper space of the equipment is set as the shredding area, which adopts the structure of closely arranged small-blade- rotor-shaft, and is equipped with the forced feeding mechanism of the space is provided with a crushing area, and the structure of the rotor shaft and the feeding mode can be determined according to different materials, characteristics and output of the crushed objects. The shredded and crushed materials do not need any conveying equipments. The machine has more compact structure, using less footprint, which has an outstanding cost performance.
3 Layer Co-Extrusion Cast Film Line
Categories : Film and Sheet Extrusion Lines
3 Layer Co-Extrusion Cast Film Line
Vibration Welding Machine HWV-15HLS
Categories : Automatic Welding Machine
Vibration welding uses frictional heat to join the interface of two thermoplastic parts under mechanical pressure, the upper clipper clips the thermoplastic to do a high frequency reciprocating according the setting amplitude, it will have frictional heat generated to fully melt the interface, then stop moving and continued to put pressure and cooled to weld two thermoplastic parts