English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
PET Stretch Blow Molding Machine - TEM08SH2
Categories : Automatic Blow Molding Machines
Economic and energy saving compare with other crystallized machines.It can save up to 50% of energy. Through star wheel, stable and smooth to transport system.
Silicone Double Injection Machine - YD Series
Categories : Silicone Injection Molding Machines
Silicone and plastic double injection system Satisfy two requirements in once.
30% Glass Fiber Reinforced Nylon 6 Material (PA6 GF30)
Categories : Composite Material
PA6 30% Glass Fiber Reinforced (PA6 GF30), also known as PA6 GF30 material or 30 glass filled nylon, is a widely used engineering plastic with excellent mechanical strength, rigidity, and heat resistance. This nylon compound performs consistently across different environments, offering easy injection molding, a smooth surface finish, and robust structural support.
GT -The Servo Driven Press
Categories : Rotogravure Printing Machines
GT ( The Servo Driven Press) The press is highly automated with servo drive on each print station. This press is designed to combine rotogravure printing quality with short change over times, low waste levels and easy operations. If you are looking for a servo driven rotogravure press, this is the press for you to customize
PET PLA sheet extrusion line
Categories : Film and Sheet Extrusion Lines
PET PLA sheet extrusion line
POLYCARBONATE CORRUGATED SHEET-L20
Categories : Pipes, Sheets & Profiles
Polycarbonate Sheet (PC Sheet) is a high polymer with excellent impact resistance, transparency and light transmission. The PC sheets are widely used in factories, buildings(corridors and windows, etc.)
Magnetic Clamping System
Categories : Mold Changing Systems
Electro-permanent magnetic quick mold change system is perfectly for 50~4000 Tons injection molding machines.The latest magnetic structure and outstanding design of magnetic circuit achieves a 20% and more of the magnetic force than traditional magnetic temperate design Electro-permanent magnetic quick mold change system provides much greater improvement on mold change efficiency. It performs less than 3 minutes for mold changing of general injection molding machine. For large size machine, it will shorten the mold changing time from 2 hours down to 10 minutes. The system requires just single operator for mold changing job. Without any tool, operator can easily handle this system beyond the safety distance of the machine. The system can reduce labor cost and man power waste greatly. 8 special safety function designs can fully protect machine operation safety.
Nitrile And Latex Glove Dipping And Coating Machine-JB-SUB
Categories : Rubber Dipping Machines
1.The machine use continues moving chain which can produce high capacity and low cost glove. 2.Keep dipping level in balance and adjust dipping length automatically. 3.The molds arrange in tight that save lots of oven space 4.Hot air cycle system to make temperature in oven is even 5.The machine has collect system that can reuse the redundant latex 6.Install a whole row molds that can change the mold by row easily which will not affect the production capacity.
Vertical 4 station Core-rotate Injection Molding Machine
Categories : Silicone Injection Molding Machines
The machine is designed for silicone rubber products which have poor fluidity and require long heating time.
Bottle Filling Machine
Categories : Labeling Machines
FEATURES : 1. Made of SUS#304 corrosion resistant stainless steel and aluminum alloy 2. Filling volume and speed can be adjusted easily PLC control system with HMI touch panel for easy management 3. Memory storage of 15 to 20 sets for future usage 4. Ball-valve shut-off nozzle prevents liquid from dripping down 5. Dipping nozzles can prevent spillage and diminish bubbles 6. Capacity depends on filling nozzles, product and volume. 7. Machine is customized 4 - 12 filling nozzles. 8. It can be optional combined with the capping machine, labeling machine, shrink machine… 9. Piston pump filler is standard equipment, servo filler is optional. APPLICATIONS : Shampoo, Engine oil, Motor oil, Hair condition, Lubricant, Water, Sauce and other liquid or paste products …..etc..
ULTRA LOW ENERGY DRYER
Categories : Dryers and Dehumidifiers For Plastic Materials
The first ULTRA Low Energy Dryer for plastics. Ultra-low kW energy usage - fast ROI and savings for a lifetime. Drying costs so low, it’s almost free Energy efficient unique vacuum drying technology Faster drying, faster start-ups, minimal maintenance
Rubber/Silicone Preformer Slicer
Categories : Rubber Cutting Machines
Nature rubber Rubber of metal boned parts Oil resistance rubber NBR+PVC concoction Synthetic rubber Medical/Pharmaceutical usage rubber Heat resistance rubber
C Type Shuttle Table Low Pressure Molding Machine
Categories : Low Pressure Injection Molding Machines
Low pressure molding is a new injection molding process in recent years. Low pressure molding production is a process uses hot liquidify Polyamide material.
Two Platens Injection Molding Machine - 400MBE to 2300MBE
Categories : Injection Molding Machines by Platen
The actuator of the clamping force is installed on the fixed platen of the conventional two platens injection molding machine. The design of the MBE model has four sets of traveling cylinders inside of the movable platen to close the mold and to build up the clamping force at the center of the platen.
PVC、EVA、PP/PE + CaCo3、LSNH PVC+NBR、TPR Compounding System
Categories : Compounding Lines
•Pellets for Medical Tubes •Injection Tube (Medical Use) •Cable & Wire Pellets (LSNH) •Cable & Wire
3D CAD simulation figure & ABS + CNC proofing
The biggest problem in rain boot mold creation is discussion. In the past, 2D sketches were used to discuss patterns and then reference samples were used to assist imagination between both sides. However, rain boots are composed by the curvature of the curved surface of the high variation.Only by 2D sketches and sample auxiliary may lead to a gap between imagination and practices, resulting in continuous modification. Rain boot mould：PVC wellies, boots or foam material wellies and boots shoe mold, shoe mould, mould on shoes, mould shoes,mould in shoes Rain boots, boots, work shoes, gumboot,pvc shoe,eva shoe,pvc boot,plastic shoe,injection shoe
Rubber strip (aluminum strip) air pressure shaft 12mm~600mm
The airbag of this type of product is made of strong and durable TPU material, with a multi-claw design placed in the T-groove. The external pressure strip can be matched with rubber, aluminum strips and other materials, and can also be installed with sliding balls, rollers, etc. There are high-load and lightweight designs. The 6" air shaft tube is 2 meters long and weighs about 20KG, with a minimum diameter of 12mm.
One Layer Twin Head Blown Film Machine
Categories : Blown Film Extruders
High speed for T-shirt bag conversion For film width 100~800mm Extruder dia. 45mm, 55mm or 75mm
DG250 Mini Injection Molding Machine
Categories : Automatic Injection Molding Machine
1.Humanized Operation Panel 2.Aut-lubricate System 3.Injection System Adopts Precision Linear Sliding Track 4.Injection Purge Cover 5.Hopper Move-out Device
Polyamid 6 - NA7200GK35
Categories : PA(Polyamide) /Nylon
Glass fiber 35% reinforced, high modulus, high impact, black colored. Applications: Hand tools, Power tools, Gardening tools, Automobiles, motorbikes, bicycle parts and components, Spare parts of sports equipment, Electronics, Electrical cases and components, OA office components, Water supplies, Medical rehabilitation equipment.
Polyamid 66 - NB1200G33
Categories : PA(Polyamide) /Nylon
Glass fiber 33% reinforced, high flow. Applications: Hand tools, Power tools, Gardening tools, Automobiles, motorbikes, bicycle parts and components, Spare parts of sports equipment, Electronics, Electrical cases and components, OA office components, Water supplies, Medical rehabilitation equipment.
LDPE Super High Speed Blown Film Machine
Categories : Blown Film Extruders
King-Plus HES Series is designed to produce HDPE plastic film, while LES series for LDPE plastic film. These machines could give you advantages with high-quality, extraordinary mixing performance and high output capacity. With precise machinery design, they could work in efficiency state to realize the achievement of saving energy. HDPE & LDPE film is commonly used to shopping bag, garbage bag, surface protection film and barrier film etc.. There are some auxiliary options as like rotary die seat, auto loader, gusset device, embossing device and auto roll change device and so on, to build a especially-suitable blown film machine for you.
High Temperature & High Pressure Heat Transfer Medium System - GF/TO Series
Categories : Control Equipment
GF/TO-Series Heat Transfer Medium for indirect Circulation System / Mold Temperature Controller With both cooling and heating capabilities, is the required system for enhancing the effectiveness of the main unit's running temperature. ●With both heating and cooling functions. ●A substitute for steam boiler: Safe, inexplosive and high heat efficiency.
J- Frame Rubber Injection Molding Machine (F.I.L.O.)
Categories : Shoe Sole Making Machines
●Simplicity in material preparation. Flexibility in the production of complicated product. ●Compound with plasticizing process and temperature controlling pre-heating, decrease curing time and increase production efficiency. ●Material fully filled with mold via runner path, suitable for complex product forming. ●Combined with molding design and injection flow control, decrease rubber flash and save labor cost. ●Vertical molding clamping device suitable for product with insert.
TABLE TYPE SEALING MACHINE-ET-58M
Categories : Sealing Machines
1. It is made of the stainless 2. Operation simple, quick and easy
Moduflex-The Multi-Combination Modular Press
Categories : Flexographic Printing Machines
The Moduflex is a gearless press that provides fast register setup ad tighter register tolerances. The press is able to combine with inline gravure, inline flexo, offset, die cutting sheet cutters and has a rotary screen. The press is suited for both mid and wide web application. If you are looking to integrate different production line processes together and with the highest flexibility, this is the press for you to customize
Hydraulic Edge Position Controller
Photoelectric sensor detects by projection, easy to use without setting, accuracy 1mm.
2RT Mold-Open Tire Bladder Rubber Back-Injection Molding Machine
Categories : Rubber Injection Molding Machines
The 2RT surpasses the traditional top opening mold that can be used for the double or triple molds with the design of the opening mold and pushing out the mold in the between. The opening mold can be adjusted by the software with separate opening, separate pushing out the mold in between, continuous opening and continuous pushing out the mold in between. tyre bladder
Spindle Servo Motor-SP3 Series
Categories : Motors
SP3 suitable for technical request below 12000RPM and available for customized or high speed type spindle motor.
P-14
Categories : Injection Molds
