English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
Taper Screw Batch Pre-former
Categories : Rubber Mixing & Pre-Processing Equipment
FUNCTION: This uniquely designed Taper Twin Screw Extruder has a large volume open top hopper, which will accept a whole batch from your mixer without performing. The twin screws continuously and automatically bite and feed the compound, which then is extruded through a die. This simple but effective feeder, allows you to eliminate many labor intensive material handing processes, between your mixer and existing conventional extruders or other equipments.. BENEFITS: Large volume hopper capacity Exceptional cooling and temperature control Full and easy access for cleaning Simple, automatic and continuous operation Easy maintenance Cost effective and affordable
Super Cooling Dispersion Kneader
Categories : Rubber Mixing & Pre-Processing Equipment
This machine most suitable kneading application for all kind Rubber, Plastic and Chemical materials. This machine with following features: High quality processed products ╱ Easy for operating ╱ Easy for color changing╱Extra big rotor jacket for super Cooling ability╱Low temperature mixing╱One pass mixing.
Beverage Packaging
Categories : Liquid Packaging Machines
FCS has been in the industry of machines for many decades. Our machines had met international standard and earned good reputations from our customers. In recent years, we devoted in developing turnkey project, that suitable for water, beverage, detergent, edible oil production line, in order to satisfy customers’ demands of one stop shopping, short lead time, and achievement of time to volume. We are able to implement engineering plans with integration abilities for factory layout planning, equipment, molds, automation peripherals, and mass production technique.
Crushing Machine for Immediate Recycling System C-200 / 250 / 300 B
Categories : Crushing, Shredding & Granulating Equipment
Stainless steel transmission cover
Inspection Rewinding Machines-INSPECT-V
Categories : Slitters and Rewinders
This inspection rewinding machine for finished roll is designed to handle and inspect rolls of material that have already undergone slitting. It supports quality control process, and enables efficient roll rewinding. Additionally, the function of flag detection feature makes it easier to locate flags and perform corrections as needed. This inspection rewinding machine is critical equipment for ensuring that the finished rolls meet quality standards before being pouched or sent for final use.
2400 Fast Display / Alarm Unit
Categories : Sensing, Monitoring & Inspection Equipment
Double configurable input for strain gauge / potentiometer / linear signal / TC / RTD Two auxiliary analog inputs Differential measurement High precision: 0.1 % f.s. ±1 digit High tripping speed Automatic calibration for 6-wire strain gauge Transmitter power supply and strain gauge probe power supply Memory: min. peak, max. peak, max. peak – min. peak 3 configurable alarms, failsafe function 2 digital inputs Up to 4 relay/logic outputs 5-digit display Serial communication interface: - RS485 MODBUS RTU protocol (optional) - Profibus DP slave (optional) Isolated analog retransmission output (optional)
Twin Body Oil Hydraulic Compression Molding Machine - FB SERIES
Categories : Compression Molding Machines
APPLICATIONS: Bakelite, rubber, fiber, brake lining and any kinds of heated compression molding products.
Doctoring and Rewinding Machine Series-FSE
Categories : Slitters and Rewinders
-Quality inspection of round rolls. -Surface inspection after printing. -Roll small rolls into big rolls or vice versa. -For quality inspection for converting materials, electronics, computer and optical materials, film roll and foil roll.
H,TC Series
Categories : Control Equipment / Systems
With thermocouple-break indication ON / OFF or proportional control selectable Heater-break indication selectable 5 alarm output modes selectable ARICO - The Best Solution Of Temperature Controller ARICO Technology and worldwide's rubber and plastic injection industry manufacturers have cultivated a long and stable co-operation relationship between us for many years. We was founded in 1987, base on sophisticated manufacturing technology, and focus on the research and development and innovation of industrial control instrument technology. We are not only good at producing customized precision Temperature Controller and related application equipment, but also provides high-quality Temperature Controller with the most convenient setting mechanism, stable quality, at a reasonable price to manufacturers in Taiwan, China, the United States, India, Argentina, Israel, Mexico, Thailand, Malaysia, Southeast Asia and other countries. In addition to accumulating and stabilizing partners for related instruments with Temperature Controller, ARICO continues to conduct research and development in order to provide more stable and efficient machine stability, just for achieving a higher efficiency and stable instrument technology level on temperature control, displacement sensing, pressure sensing, injection molding machine IoT on rubber and plastic industry.
Single Screw Underwater Pelletizing Extrusion Line | CK-S
Categories : Pelletizing & Compounding Lines
CYKF CK-S series Single Screw Underwater Pelletizing Extrusion Line can be applied to a wide range of applications. It is especially suitable for materials with high viscosity, low MI, and difficulty to be shaped, e.g., TPE and TPR. Possible materials : TPU, TPE, TPV, TPR, PP, PS, PLA, PVA, SEBS, EVA, Rubber, Hot-melt adhesive, Special resin, and Micro pellet, etc.
Conveyer of Fan Cooling Machine
Categories : Rubber Mixing & Pre-Processing Equipment
Rubber, plastic / EVA, mingle banbury and mixing roll and then become strip shape, through this device and immerse plastic material in the Adhesive Proof Agent, again use Cooling Fan for water drying and attain to adhesive proof and cooling effect.
4 Color Offline Type Flexo Printing Machine: FSP-5000 Model
Categories : Flexographic Printing Machines
This is a higher grade flexographic printing machine than ll model, standard equipped with the japan original imported unwinding auto tension controller, and the hydraulic type edge position control (epc) system, double unwind and rewind station, let the operation more efficiency. Films go to the printing station with the banana roller to spread the films much even, and printing station with individually drying pipe providing the printed films for the primary drying, machine with t5 working light keep the working place very bright, upper side with overhead big drying chamber enlarge heating capacities cooperate with the blower ensure the films can be dried accordance with high speed.
Hot Needle Perforation Machine
Categories : Plastic Bag Making Machines
The MGR-HPR-1000 is Ming Jilee's hot needle perforation machine, designed to perforate BOPP, CPP, and PE film. The hot needle pins are imported from Europe, and the perforating system runs as a closed system that keeps hot air energy within the working area, keeping heating consumption down.A high-precision edge position controller and fully automatic tension controller keep film quality stable during operation, and pin design is customized down to a minimum pitch of 2 × 2 mm. For thin PE material, the heating system can be switched off so the needles mark small holes instead of perforating with heat. A special holding shaft lets operators remove finished rolls easily once a roll is complete.Model: MGR-HPR-1000Unwind width: 300 - 1000 mmRewind diameter: 600 mm (Max.)Pin design: customized (min pitch is 2 × 2 mm)Machine speed: 60 - 130 m/min (depend on material and design)Machine dimension: 4,200 (L) × 2,150 (W) × 1,960 (H) mmMachine weight: 4000 kgRequired power: 24.5 kw
PVC Wood-Grained Printing & U.V.Curing Equipment
Categories : Extrusion Coating Machines
One line equipment includes a conveyor, U.V. curing machine, U.V. coating machine, 3-colors wood-grain printing machine, and wash-out machine, we can meet customers' requirements in choosing the suitable machine.
Three-Layer HDPE Co-Extrusion Blown Film Machine
Categories : Blown Film Extruders Lines
The KS-ML3-45-55-45 Three-Layer HDPE Co-Extrusion Blown Film Machine is a high-efficiency blown film line developed by KUNG HSING Plastic Machinery for liner bags and general packaging bag applications.Engineered for HDPE- and MDPE-based formulations, with excellent adaptability to recycled materials, this machine delivers stable film formation, consistent bag quality, and reliable winding performance, even at thin gauges ranging from 10 to 50 microns.
Rubber Processing Machine
Categories : Rubber Recycling Machines
Reclaimed rubber machinery Rubber recycling machinery are designed for recycling waste rubber, rubber tires, rubber scraps into new rubber products. It consists of cracker, grinding roll, refiner and its auxiliary equipments.
Stepper-Controlled Proportional Valve 0-230L/min
Categories : Valves & Manifolds
Product Serial: FC-120+PM-120 Proportional Flow Control Valve consists of PM series driver and FC series proportional flow valve. With an input signal either through analogue or digital, the needle inside the proportional valve moves proportionally to the signal. This series is able to control the flow rate of air and liquid with high resolution, high accuracy, and high repeatability. It is developed for industries that require a high degree of adjustment in flow rate. Series PM driver provides series FC valve with the required power and control signal (step and direction). It controls the step of a bipolar stepper motor with an analogue signal (0-10 VDC/4-20mA/RS485 Modbus).
Plate (5 partition)
Categories : Rigid Packaging & Containers
Product Number: EG-108 Color: White Material: Fiber Shape: Rectangular Size: 8" x10" Height: 3/4inches Box Size: 9"x10.6" x24.2" Unit Per Box: 400
Extrusion Lamination Machines FML-EXL
Categories : Industrial Lamination
PLC STATION 1 - Laminating speed control - Extruding speed setting - Laminating parameter setting - Operation temperature setting - Driver status monitoring - Production additives saving - Malfunction warning information - Tension information monitoring PLC STATION 2 - Automatic unwind tension control - Diameter detecting control - Dancer roller tension control - Automatic cutting roll change - Jointing gluing surface check - Automatic pre-drive jointing - Automatic infeed tension control - E/P transducer control PLC STATION 3 - Automatic rewind tension control - Rewind tape tension control - Dancer roller tension control - Automatic cutting roll change - Non-stop roll change - Automatic length counting - Automatic outfeed tension control - E/P transducer control
Anti-Leakage Vacuum-PSY
Categories : Valves & Manifolds
The PSY anti-overflow vacuum was developed by Sino-Alloy Machinery as an important accessory to their extruder line. Developed to prevent extruded material overflow from the vacuum vent during degassing and subsequent vacuum failure. The PSY anti-overflow vacuum is driven by a pair of vertical intermeshed screws to move overflow material back to the material barrel while degassing with the vacuum. Can also be installed on side feeders to prevent overflow.
Ultrasonic Metal Welding Machine KWG2620-E
Categories : Welding & Surface Treatment Equipment
Ultrasonic metal welding, generally for the fusion of low melting point metal materials such as copper, aluminum, etc. Taking the ultrasonic welding metal plate as an example, the two metal plates are overlapped and placed on the base, and the ultrasonic welding head is pressed against the coincident metal plate with appropriate pressure, and a lateral vibration of 20,000 to 40,000 times per second is applied. The two metal plate joints are subjected to high frequency vibration friction and welded. In this welding mode, the solvent is not required, and the welding portion does not need to pass current and heat, and is close to the cold joint, and the intermetallic compound is less likely to occur, and the structure changes little. The welding feature is that the deformation of the joint is less, the material is not melted, and the thermal influence of the material is not significantly changed. The fragile cast structure or the intermetallic compound can be obtained, and the fusion of the foil and the small joint can be achieved without strong resistance welding. Long foil can be applied by roller type continuous welding. KWG0935 model can be applied to lithium battery copper aluminum foil and aluminum nickel sheet welding, copper aluminum foil spot welding, capacitor copper aluminum foil spot welding, etc. KWG2020 model can be applied to lithium battery aluminum shell and aluminum nickel sheet welding, wire and terminal welding, wire butt welding, wire and metal plate welding, metal plate spot welding, etc........
