English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
Air Pressure Ratio Regulator(0-103bar)
Categories : Sensing, Monitoring & Inspection Equipment
Product Serial: QKL-B1T+QKL-BPF • B1T Electronic Pressure Regulator Provides an air pilot signal to the dome of the air volume booster. By controlling pressure to the top of the diaphragm, we control pressure out of the volume booster. • Air Pressure Ratio Regulator KaoLu’s high pressure ratio regulator is mostly used in high pressure environment, in which the users are used to using mechanical air pressure regulator. Using our high pressure ratio regulator assembly, it is now possible to electronically regulate high pressure from potentially hazardous environment using control such as RS485-modbus serial communication. Using the dome-loaded method controlled by our electronic pressure regulator, the users can achieve pressure up to 3000 psig (210 bar) with resolution up to 5 psig (0.3 bar). Moreover, our high pressure ratio regulator not only works with air, the newly developed ratio regulator is compatible with different fluids such as water and high temperature steam pressure. There is a choice of single loop feedback or external sensor feedback. With single loop feedback where we ensure the dome loaded pilot air is the same, the drawback is that the output pressure from the high pressure ratio regulator is not monitored. The accuracy is typically about 2-3% with this method. In a different scenario where an external sensor was mounted to the ratio regulator or mounted remotely downstream of the high pressure ratio regulator, we can ensure high accuracy to be achieved. Please click on below link for application: Tire Curing
Single Body Die-removing Ejection Compression Molding Machine - FCS Series
Categories : Compression Molding Machines
APPLICATIONS: Conductive rubber, oil seal, automobile parts, keyboard pad, brake lining, mahjong, nontoxic rubber, thermos bottle plugs, nipple, medical rubber plugs etc.
Ultrasonic welding module of Automation KWD(IGBT)
Categories : Welding & Surface Treatment Equipment
Automatic tuning (Frequency control) Resonance frequency compensation during welding cycle. Full bridge IGBT module are used in the generator to improve durability PWM(Plus Width Modulation) amplitude control PWM controls amplitude during start-up to prevent horn damage due to high voltage starts. 8 selective start-up settings for ultrasonic activation to match various requirements of horn's design Protection against Ultrasonic frequency offset & high voltage overload. Automatic frequency self-checking at start-up Frequency compensation as horn's working temperature variation LCD displays the frequency and percentage of amplitude Two kind of welding mold, Time control mold & trigger mold Simple operation, 7" touch panel , abnormal information text display
Rewinding Machine FSR-800
Categories : Slitters and Rewinders
For re-reeling operation of slit rolls with uneven edges or tension. FSR Rewinding Machine will help you to achieve high quality re-reeling, even without the use of an advanced slitting machine. Especially ideal for an automatic filling packaging machine which requires a large reel diameter and rigorous tension quality.
Safety Net
Categories : Industrial Knitting Machines
Fishing net making machine of SR-KF Series is single needle bed Raschel knitting machine designed for making knotless fishing nets with various specifications in all different kinds of raw material; for example, Nylon, PE, PP, etc. The control panel of this series adopts inverters or servo motors to control speed, easy for machine operation and adjustment.
TC5100/TC5200 Multi-Cavity Hot Runner Temperature Controller
Categories : Runner Systems
TC5100/TC5200 features a modular design for easy maintenance. Each zone controls two temperature points, helping reduce equipment costs. With a graphical HMI, RS485 communication, and current detection, it provides intuitive and convenient operation. Suitable for various applications, including automotive, preform injection, and medical consumables. ARICO - The Best Solution Of Hot Runner Temperature Controllers ARICO Technology and worldwide's rubber and plastic injection industry manufacturers have cultivated a long and stable co-operation relationship between us for many years. We was founded in 1987, base on sophisticated manufacturing technology, and focus on the research and development and innovation of industrial control instrument technology. We are not only good at producing customized precision Hot Runner Temperature Controllers and related application equipment, but also provides high-quality Hot Runner Temperature Controllers with the most convenient setting mechanism, stable quality, at a reasonable price to manufacturers in Taiwan, China, the United States, India, Argentina, Israel, Mexico, Thailand, Malaysia, Southeast Asia and other countries. In addition to accumulating and stabilizing partners for related instruments with Hot Runner Temperature Controllers, ARICO continues to conduct research and development in order to provide more stable and efficient machine stability, just for achieving a higher efficiency and stable instrument technology level on temperature control, displacement sensing, pressure sensing, injection molding machine IoT on rubber and plastic industry.
Hydro Dipping Machine - Semi-Automatic - YHT223AXF
Categories : Hydrographic / Water transfer Machines
Dipping Tank + Auto Film Layer + Auto Spray System Dipping Tank 3 meters length. A powerful combination of all necessary important processes for WTP processing. From the very beginning laying, and the following activator spraying to the final dipping stage, done the main WTP process with only one button. YHT-223A2XF This machine includes dipping tank, auto film layer and auto spray system. The combination of these 3 components not only makes WTP even simple, but more important– stable quality to the final product. This system can memorize multiple sets of different processes. YHT-223A2XF is perfect for large product and medium quantities of production/day
Air Compressor
Categories : Compressed Air & Pneumatic Equipment
Extruder heading machine printing machine capping machine sealing machine accessories
CFC Free Refrigerant Air cooled Water Chiller SIC-A-R2
Categories : Cooling & Heating Equipment
CFC free Refrigerant Air cooled Water Chiller SUC A R2
WPP-A Contactless Magnetostrictive Linear Position Transducer(Analog Output)
Categories : Sensing, Monitoring & Inspection Equipment
Contactless linear position transducer with HYPERWAVE magnetostrictive technology. The absence of electrical contact on the cursor eliminates all wear and guarantees almost unlimited life. High performance in terms of environmental IP protection and EMC immunity. High accuracy of the mesurement with reference to the non linearity, repeatability and hysteresis. High resistance to vibrations, mechanical shocks for use in a harsh industrial environment.
Fully Automatic High Speed Single Line With Core Garment Cover(Laundry Bag), Garbage Bag, Vegetable Bag, Table Sheet on Roll Making Machine / SBCR-750-OB
Categories : Plastic Bag Making Machines
Computer control over the entire process From film roll to final product, one process flow Automatic film feeding, coordination free from tension adjustment Automatically stop when running out of film / color scanning error / film feeding blocks or jam
Auto Film Layer + Auto Spray System
Categories : Hydrographic / Water transfer Machines
The powerful combination of film laying & activator spraying system makes WTP process simple & stable; in addition, this convenient combination system can be applied on the original YHT standard dipping tanks, thus, increase the expansibility of the dipping system. Water Transfer Printing automated film laying and spraying system. This system can memorize multiple sets of different processes.
Portable Facial Massager KUM-220
KUM-220 provides 1 million times micro vibration per second, it can remduce the freckles and wrinkles, accelerate the circulate of blood, activate cell, enforce the expel of scraps of skin. If continuous apply could achieve pure, white, smooth, firm skin.
Ultrasonic Humidifier KT-100A
1.Ultraquiet, No Water Spots. 2.Energy efficient with low power consumption. 3.Easy installation and operation. 4.With humidity control and mist low high. 5.Safety shut-off when no water in tank. 6.Easy clean and Easy-To-Fill water tank.
Blown Film Machine - QUEENPLAS Series
Categories : Blown Film Extruders
Blown Film Machine - QUEENPLAS Series
Air Cooling Type Recycling & Pelleting Machine
Categories : Pelletizing & Compounding Lines
The MGB-RP-120 is Ming Jilee's air cooling type recycling and pelleting machine, reprocessing HDPE, LDPE, and LLDPE waste film back into resin pellets. Waste material can be fed directly into the inlet without pre-crushing in a separate crusher, since the machine's construction smashes and pellets the material in one step.Operation is straightforward: each heater's temperature is preset in advance, and once all temperature gauges reach the set point, the operator waits roughly 20 - 30 minutes before starting. A hydraulic screen exchanging device allows quick screen changes, a vision window on the barrel lets the operator observe pelleting in progress, granule size is adjusted via the inverter, and an IN-FEED pneumatic pressing cylinder supports production capacity. Output reaches 50 - 60 kg/hr for LDPE/LLDPE and 40 - 50 kg/hr for HDPE.Model: MGB-RP-120Applicable resin: LDPE / LLDPE / HDPE Waste FilmOutput (LDPE/LLDPE): 50 - 60 kg/hrOutput (HDPE): 40 - 50 kg/hrMachine dimension: 2,925 (L) × 2,800 (W) × 2,035 (H) mmMachine weight: 2,900 KgRequired power: 38 kw
Fully Auto. Index Divider Machine
Categories : Bag Making Machine by Applications
The MGA-56-700 is a fully automatic index divider machine that processes paper, PVC, or PP in roll form into A4 or A3 index dividers. An automatic servo motor with computer digital length control keeps operation simple and product specification consistent.From the raw material roll, the machine runs automatic edge lining, edge modification, gold stamping, punching, cutting, and auto counting in one continuous sequence, removing the need for manual handling. The auto E.P.C. edge trimming device, changeable punching tool, and up-and-down interchange collector work with precise, durable punching molds and high-technology electronic control to keep the punching position accurate, while the control and monitor system stops the machine automatically with an alarm if a problem occurs.Model: MGA-56-700Feed material: PP in roll formAvailable size: A4, A3Single layer film thickness: 0.06 - 0.20 mmEffective cutting size: 150 - 364 mm (width) x 150 - 295 mm (length)Output: 70 - 100 pcs/minMachine dimension: 4,350 (L) x 2,100 (W) x 1,500 (H) mmMachine weight: 2,300 kgRequired power: 7.2 kw
DL Die Lifter (Roller Type)
Categories : Quick Mold Change and Clamping Systems
The Quick Die Change System caters for a variety of different Die Lifters which allow for simple and quick movement of dies on a press bed. Forwell supplies two different types of Die Lifters according to the press tonnage, die weight and the die positioning accuracy required. There is a choice between a Spring-Loaded Die Lifter, better suited for light to medium duty pressing operations and a Hydraulic Die Lifter more often used for medium to heavy duty pressing.
Raschel Knitting Machine SR-F series
Categories : Industrial Knitting Machines
Model SR-F series is Single needle bed Raschel knitting machine, designed for making the flat yarn products. The efficiency of knitting machine will be 10% more if it matches slitting & extension machine. Because of its steady yarn feeding, the machine can raise the quality of fabric also reduce the waste rate. But if customer had flat yarn or monofilament making machine already, we would offer creel as yarn let off system to correspond with customer's demand.
High Speed Side Sealing Zipper Bag Making Machine with Servo Motor Control Model: CW-Z-SV
Categories : Plastic Bag Making Machines
High Speed Side Sealing Zipper Bag Making Machine with Servo Motor Control Model: CW-Z-SV
Semi Automatic Long Loop Handle Bag Making Machine LY-700LH
Categories : Plastic Bag Making Machines
Features: - Semi-automatic loop handle bag making machine. - PLC motion control. - Human-machine interface for easy setting.
Draw Tape Side Sealing Bag Making & Folding Machine
Categories : Bag Making Machine by Applications
Servo motor driven, efficient mechanical structure. Fully automatic, large screen , easy to read, user friendly. Pleasant cutting and sealing, with high firmness.
Agriculture Heavy Duty LDPE/LLDPE Blown Film Line
Categories : Blown Film Extruders
Agriculture Heavy Duty LDPE/LLDPE Blown Film Line
Co-rotating Twin Screw Strand Pelletizing Compounding Line | CK-HT
Categories : Twin Screw Extruders
CK-HT series Co-rotating Twin Screw Strand Pelletizing Compounding Extrusion Line is especially for composite materials that are suitable for strand pelletizing production method. It can be applied to a wide range of plastics. Possible materials: Various composite materials, e.g. PC, PE, PS, ABS, Nylon, LCP, PPS with additives of glass fiber, Wood powder, CaCO3.
Corona Treater - High Speed THH-2H
Categories : Welding & Surface Treatment Equipment
Corona treater for Printing purpose, features Output 8~20 kw Treat width 1000~3000 mm Speed 100~300 m/min. 2 side treatment 38-46 dyne Apply to inflation, lamination,printing, cutting application Stainless discharge 12 steps
Sandwich Folding Machine With 1 Colors Rotogravure Printing
Categories : Bag Making Machine by Applications
The MGA-27B-1000+GB-1060A is Ming Jilee's sandwich folding machine with 1-color rotogravure printing, built to fold CPP and BOPP film into sandwich-style sheets while printing a single color in line. It is part of the MGA-27B series, which also includes the -1200, -1400 and -1600 models.Working width scales from 1,000 (W) mm on the base MGA-27B-1000+GB-1060A up to 1,200 (W) mm, 1,400 (W) mm and 1,600 (W) mm on the larger series models, all running at the same output range of 10 - 120 Meter/min, so the width can be sized to the job without changing production speed.Model: MGA-27B-1000+GB-1060AFeed material: CPP & BOPPSize (this model): 1,000 (W) mmSeries sizes available: MGA-27B-1200 (1,200mm), MGA-27B-1400 (1,400mm), MGA-27B-1600 (1,600mm)Output: 10 - 120 Meter/min
Seaming Machine-K2
Categories : Shrink Sleeve Machinery
The seaming machine K2 model is one of our most popular machines, with over 400 units in operation worldwide. This machine is capable of running at speeds of 300 meters per minute, efficiently forming sleeves through its adjustable forming section. Available in 300mm and 400mm lay-flat models, it offers versatility and precision for a variety of applications in the packaging industry.
Mold Temperature Controller (YBMI/YBMD)
Categories : Control Equipment / Systems
Steady controlled temperature makes plastic molding accurate in size and consistent with quality. Accurate mold temperature solves the problem of plastic flow patterns, reducing flow and weld lines, gloss appearance, record grooves effect, silver streaking, stress-whitening, warping, and etc.... P.I.D temperature controllers are used for accurate control of temperature within±1℃. Two-step-heating selector makes rapid temperature increasing possible when require thus saving time and power specially start up in the morning. Patented “Heat-insulated” design improves your safety, extend the machine’s lifetime and make maintenance more efficiently. YBMI : By oil, suit for long-term continuous operation, keep the temperature steady, no flash on tiny and thin products, and no corrosion. However, the heater may be damaged if you do not use the thermo oil correctly or change oil routinely. Recommend to choose oil-type mold temperature controller when your required temperature is 150℃ or above. YBMD : By water, heating up faster, cooling better, harmless to your mold and more economic than oil type for maintenance and cost. However, the water boiling point is low and the element of different water may occur corrosion or limescale to affect the heat exchange and products quality. Recommend to choose water-type mold temperature controller when your required temperature is 150℃ or below.
Slitting Machines COMPACT/ HSC
Categories : Slitters and Rewinders
The SLIT-HSC slitter is designed with a compact, space saving structure that combines high performance with exceptional ease of operation. Its compact machine body helps maximize factory floor utilization while improving overal production efficiency.Featuring a simplified workflow design and an intuitive control interface, the machine minimizes operator training requirements and enables faster setup, adjustment, and daily maintainance. Equipped with a stable automatic tension control system and high-precision slitting desgin, the SLIT-HSC delivers consistent, high-quality slit rolls even during high-speed operation. It is an ideal slitting solution that balances efficiency, operational stability, and user-friendly performance.
CH- Plasma - M
Categories : Welding & Surface Treatment Equipment
Plasma Treater Country of Origin：Taiwan Plasma treaters produce plasma surface treating to promote the adhesion of inks, adhesives, coatings, sealants & paints. Manufacturers integrate in-line plasma treatment equipment to enhance adhesion on plastics, composites, metals & glass surfaces. The plasma pretreatment process cleans, etches, & functionalizes surfaces to activate bonding sites by increasing wettability & surface energy.
SPX-2 Series
Categories : Sensing, Monitoring & Inspection Equipment
Smart 4-20mA pressure transmitters designed for use in hazardous locations and are available with a variety of different process and electrical connections.
Plasma - JR
Categories : Welding & Surface Treatment Equipment
Applied to 30mm width or tube inside surface treatment. Detail specification contact please. Plasma treaters produce plasma surface treating to promote the adhesion of inks, adhesives, coatings, sealants & paints. Manufacturers integrate in-line plasma treatment equipment to enhance adhesion on plastics, composites, metals & glass surfaces. The plasma pretreatment process cleans, etches, & functionalizes surfaces to activate bonding sites by increasing wettability & surface energy.
Plastic Pelletizing Machine with Crusher
Categories : Crushing, Shredding & Granulating Equipment
RECYCLING-PE-PP-ABS-PS
Double Deck Bottom Seal Bag Making Machine (4/6/8 lines) DL-V-(4/6/8)
Categories : Plastic Bag Making Machines
Cold-cut system - For thin film material. Machine uses upper heating knife and silicon roller base for sealing. Cutting knife before bag outfeeding. Double-decks production - 2 sets of sealing blades & silicon roller sets are place vertically on top of each other to seal different lines, cutting done on the same knife.
Sealing and Cutting Machine(Three Step) - FSC-303 / FSC-503
Categories : Sealing Machines
Suitable for the 3 steps sealing operation for one side sealing bag, gusset and center sealing bag, zig-zag cutting bag, hole punching bag and notch punching bag.
“Standard” Self-contained Hopper Loaders - SAL
Categories : Material Handling, Conveying & Storage
SAL series of models are mainly used beside injection molding machines, extrusion machines or other machines to dry the plastic materials, which are installed on the drying hopper directly. It also can collocate with the SICH or SCH collective hoppers to work on the inlet of the injection molding machine. After setting, the machine can work automatically and independently without frequent adjustment. For its high installing position, it may give shortage alarm occasionally. Therefore, it’s available to equip the distal switch options to dismiss the alarm.