English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
HIGH-SPEED STEEL MOLD CUTTER HSP-12
Categories : Foaming Machinery
Innovative Feed Mechanism： In which, the auto up/down feed system is designed for the height of the molded material. Superb And Stabilized Dead-Point Accuracy： For which the dual-axle synchronized mechanical structure is designed to achieve higher lower dead point stability. High-Precision Depth Adjusting Mechanism： Which uses left/right synchronized fine-tune unit to achieve 0.01mm of fine-tuning accuracy. Parameter Saving Function： To name and store relevant parameters after being set. Molding Machine On-Line Function： To carry out synchronized control with other molding machine through on-line operation. Automatic Lubrication Mechanism： In which, the automatic lubrication mechanism is designed to reduce the daily maintenance work.
PLA-25G
Categories : PLA (Biodegradable Plastics)
Specific gravity：2.28~2.31 Application: Air soft bullets, Cosmetic product cases, Gambling chips.
In-Mold Label
Categories : Labels & Shrink Sleeves & IML
In-Mold label (IML) is widely used in food container because the ink is between two layers of film and normally produce in dust-free fab or air conditioning clean room to minimize the human touch. Using IML can do the injection and labeling the product at the time. So it is suitable for mass production and standardization.
Multi-deck Cold / Hot Forming Machine
Categories : Compression Molding Machines
1. Capable of multi-layer production simultaneously to increase productivity and reduce the footprint and energy consumption. 2. Suitable for: rubber, composite parts, carbon fiber. 3. Multi-layer design with air cylinder for mold movement to increase productivity.
One Layer Twin Head Blown Film Machine
Categories : Blown Film Extruders
High speed for T-shirt bag conversion For film width 100~800mm Extruder dia. 45mm, 55mm or 75mm
FIBC Conversion (Cutting)
Categories : Cutting Machines
Suitable for converting tubular fabrics and flat fabrics. The FIBC conversion line extends the possibility to produce hoses and bodies used for 1 loop, 2 loop, and 4 loop FIBC. Depends on customer’s request, optional O and X punch device available for selection.
OPP/BOPP Labeling Machine For Square & Round Bottle -Automatic High Speed
Categories : Labeling Machines
1. Application for labeling round and square shape containers. 2. Fully automatic rotary operation for 330ml-4000ml bottles.(with certain change of parts). 3. Machine frame made of stainless steel 304. 4. PLC electronic control, touch screen monitor and electronic speed control(frequency inverter). 5. With a star-wheel carrying containers firmly while dispensing , provide stable dispensing performance under high-speed operation. 6. Use servo motor to synchronously tracks label supply, label cutting and use specially designed vacuum drum to ensure precise labeling. 7. Three-phase PLC and AC variable control with a synchronized tracking and control system to maintain label cutting accuracy in different running speed. 8. Centralized lubrication system for easy maintenance. 9. Detecting in feed situation with sensor, automatically adjust labeling speed according to feeding situation of production line, making production line coherent. 10. System safety device: when malfunctions such as irregular torques and abnormal feeding occur, machine will automatically stop for operation safety and machine durability. 11. Automatic label proofread system controller made in Germany. 12. Automatic speed self adjustment to contact other machine.
Liquid Silicone Rubber Injection Molding Machine
Categories : Rain boot Injection Molding Machines
Applicable for the production of vehicle parts, electronic and medical goods, infant care and food products etc. Save time for production process and increase productivity. The best solution to support quality and efficiency. oxygen mask
Non-Return Valves (Screw Tip)
Categories : Screws and Barrels
The key of the injection - We provide lots of materials for all kinds of design. Both for ODM or OEM are available for you. Non-Return Valves plays a very important role for your molding process and Tan Star are always dedicate to research and develop for new solution to all coming challenges around the world.
SL-COMBI-The multi-functional coating and laminator
Categories : Industrial Lamination
SL-COMBI ( The multi-functional coating and laminator) The SL-Combi is a versatile machine, combining a series of different coating and lamination techniques. Available for duplex or triplex lamination and up to muti-layer lamination inline with different coating or printing process. The machine could work with solvent, solventless and water based compounds. If you are looking for multi coating and laminating solution, this is the press for you to customize. KYMC
Wire rope coating PVC、PA12 extrusion line
Application: Coating PVC or PA12 on wire rope to protect wire
VALVE GATE-SVDT
Categories : Hot Runner Systems
For the valve pin bushing is integrated with the nozzle, the structure of manifold become very simple, and therefore this series is most suitable for the multi-cavity application. There is a pin in the nozzle and drive by pneumatic or hydraulic to open or close the nozzle. When the valve pin open / close can control the melt filling. Especially for the big gate design, the valve pin will seal the gate after packing process to prevent the stringing and get the unapparent gat mark.
Four Injection Cylinders Design Injection Molding Machine
Categories : Rain boot Injection Molding Machines
Four Injection Cylinders Design Injection Molding Machine
Latex Balloon Dipping Machine-JB-QQ
Categories : Rubber Dipping Machines
The main craftwork flow is: -Milling -Vulcanization -Stripping Off -Acid Wash -Brush Wash -Hot Water Wash -Dipping Coagulant -Dipping Latex -Drying -Beading -Drying -Add Slurry This machine system realized communication controlled by humanity-machine interface. They raise the digitized level of the system having it steady. Industry level modularization design, simple humanity-machine dialog and main speed and every section temperature can be shown in the screen. Each oven’s temperature can be controlled automatically by the temperature controller. Balloon dipping machine consists of main frame,acid tank,washing tank,stripping device,acid tank,water tank,cogulant tank,oven,latex tank, beading, rail,converying system,ladder, storage tank,vulcanization tank,mixing tank etc. The electric control system include the Programmable Logic Control(PLC), touch screen, converter etc. electronic control units and wires. Except the touch screen and sensors, the other electric parts were installed inside the control box. The control box is easy to maintance. The PLC and its software is the heart of the control system. It is mainly for help the balloon dipping machine to finish its machine action, parameter control and trouble inspection etc. It can control and manage the manufacturing, quality, user operation interface in real time.
DESIGN AND DEVELOPMENT PARTNER
Categories : Injection Molds
JDM / ODM SERVICES When bringing a new product to market or re-launching an existing product with new features, key success metrics are quality and timing t o market. Either or both may be negatively impacted if the design proves difficult to manufacture especially if there is a rapid demand for increased volume. A design partner who is well integrated with a full service manufacturing system knows how to minimize risk. Our design teams have executed numerous design-build projects for customers across a variety of industries on a global scale. We incorporate manufacturability, assembly and test principles into the EDI-early design stages involved of a product to assure seamless production. JDM/ODM services include : To use the PLM system to monitor the product life cycle management. Concept Development Mechanical Drawing Layout Documentation Verification Material Management & Sourcing Rapid Prototyping & Soft Tooling Initial Pilot Builds & DFM αTest /βTest/ Burn-in Tooling & molding in house Final Assembly Following the design phase of your product, we build prototypes to test the DFM manufacturablity and any industry compliances. Prototyping may occur multiple times at various points in the design and planning stages for a project. Once all the design and manufacturing issues are worked out, we can rapidly transition into full-scale production. Please visit our Contract Assembly page to learn more about our assembly facilities. OEM Our Original Equipment Manufacturer (OEM) service is responsible for designing and building a product according to a customer’s own specifications. Our service also includes & DFM,EDI,3D printer rapid prototype global distribution and returned product factory repair, which can greatly reduce customer’s overall production costs.
ABA Blown Film Machine (JC-ABA Series)
Categories : Co-Extrusion Blown Film Machines
JC-ABA Series - 3 layer Co-Extrusion Blown Film is the ultimate solution producing high quality film at lower production cost. The ABA 3 layer co-extrusion line consist two high performance extruders with a 3 layer ABA co-extrusion die head. The outer layer is dominantly with virgin materials, and the core layer with large percentage of CaCo3 or in-house recycled pellets material. Further the ABA 3 layer blown film structure also persist higher strength characteristic than conventional monolayer film, which overall gives an advantage to the competitive market.
PLA-28G
Categories : PLA (Biodegradable Plastics)
Specific gravity：2.51~2.54 Application: Air soft bullets, Cosmetic product cases, Gambling chips.
3RT Mold-Open Rubber/Silicon Continuous Transfer Injection Molding Machine-TCC-S3
Categories : Compression Molding Machines
●Nature rubber ●Rubber of metal boned parts ●Oil resistance rubber ●NBR+PVC concoction ●Synthetic rubber ●Medical/Pharmaceutical usage rubber ●Heat resistance rubber
Multi-Axle Auto Film Bonding Machine ALM-700LE
Categories : Cutting Machines
Patented Bonding Mechanism： In achieving higher bonding accuracy and without air bubbles. Fully Automatic Tension Control System： The tension of materials for each axle is controlled in an automatic way. Servo Transmission Control： Dual-Axle servomotor is used to achieve synchronized alignment control. Diversified Size Option： The parameter fine-tuning can be executed according to the characteristics of different materials. High Clean Bonding Environment： which meet high-cleanliness bonding space requirements in providing higher Y-Rate. Unique Material Handling Techniques： which is designed according to the characteristics of optical film to avoid scratching the material.
