English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
Tire Recycling System
Categories : Crushing, Shredding & Granulating Equipment
The tire pre-shredding machine can be equipped with bolted cutting tools to minimize the operational cost and simplify maintenance of the line. Two-stage rasper system effectively liberates the steel from the rubber enabling effective separations and the production of clean wire. The fine granulation system is equipped with a special rotor designed specifically for tire rubber size reduction. It provides maximum throughput, whilst minimizing the amount of fines created. The machine is also optimized for low operational and wear costs. Textile and dust is aspirated at several positions of the recycling system. A central Reverse Jet Filtration System extracts dust from the entire system. Our Milling System can be installed at the back end of the tire recycling machine line system. The size and configuration of the Milling System is configured according to the specific production requirements i.e. size and throughput. Advanced sound attenuation enclosures can be provided to reduce the noise level of the system to < 85dBA. Water spray & misting systems are installed on key components to maintain processing temperatures at safe levels and to protect against fire. System automation ensures that components actions are linked, the system capacity is maximized, and the system is protected against interfering material in the best way. (More About "10 Insights into Our Tire Shredding Machines : Shred Smart" ...)
LM-C Contactless – with TWIIST technology – Multivariable – CANopen
Categories : Sensing, Monitoring & Inspection Equipment
The high performance in terms of robustness, thermal stability and EMC immunity make the LM-C series suitable for use both in industrial environments and mobile hydraulics applications. The possibility to measure additional variables with respect to position (speed, triaxial inclination, acceleration and vibration, electronics temperature) combined with the CANopen protocol, allows to benefit from the advantages of Industry 4.0 in terms of preventive product and process maintenance. Strokes from 100 to 900mm Measurement: position, velocity, triaxial tilt, acceleration and vibration, electronics temperature CANopen output Self-aligning mounting mechanism Operating temperature: -40...+85°C IP67 protection Compliance with RoHS directive 2011/65/EU Output connector M12 - 5 poles male
6 Color Stack Type Flexo Printing Machine for Woven Bags and Paper: HY-6000 Model
Categories : Woven Bag Printing Machine
Special for the pp/pe woven sack roll, and craft paper printing, and various kinds of heavy duty packaging materials. Machine body use big iron casted frame with varnish coating, unwinding with auto tension controller and epc system, roll to roll continue printing bring the most stable and rapid production volume, before fabric and paper go into the printing station with the banana roller to spread the film and paper more even, standard equipped with the crane chain type assist the change raw materials and unload the printed materials.
High Productivity PET Blow Molding Machine L Series
Categories : Horizontal Blow Molding Machines
High Productivity PET Blow Molding Machine
Side Sealing Bag Making Machine(GF-S/SV Series)
Categories : Cutting Machines
The GF-S/SV series is JANDI'S range of servo-driven side sealing bag making machines, covering four cutting widths so that a converter can match the machine to its bag sizes. The GF-24SE/SV pairs with the GF-S600/SV at 600 mm cutting width, followed by the GF-32SE/SV and GF-S800/SV at 800 mm, the GF-40SE/SV and GF-S1000/SV at 1000 mm, and the GF-50SE/SV and GF-S1200/SV at 1200 mm. Cutting length is 800 mm across the series, on film from 0.01 - 0.1 mm.SE models run at Max. 200 Cycles/Min and S models at Max. 150 Cycles/Min. Every machine in the series carries a rear feeder with gusset, fold, slitter and adhesive tape applicator, HMI control, a YASKAWA/JAPAN servo drive, a SICK/GERMANY printing scanner, a conveying belt and a collecting table. Optional equipment includes tension control, EPC, a triangle folding device, punch hole and Mexican hat punch devices, ultrasonic sealing, a perforating sealing knife, an envelope punching mold and an automatic stacking table.Type: side sealing bag making machine series, servo driveCutting widths: 600 mm (GF-24SE/SV, GF-S600/SV), 800 mm (GF-32SE/SV, GF-S800/SV), 1000 mm (GF-40SE/SV, GF-S1000/SV), 1200 mm (GF-50SE/SV, GF-S1200/SV)Cutting length: 800 mm; film thickness 0.01 - 0.1 mmProduction: SE model Max. 200 Cycles/Min; S model Max. 150 Cycles/MinStandard: rear feeder with gusset / fold / slitter / adhesive tape applicator, HMI, servo YASKAWA/JAPAN, printing scanner SICK/GERMANY, conveying belt, collecting tableOptions: tension control, EPC, triangle folding, punch hole, Mexican hat punch, ultrasonic sealing, perforating knife, envelope punching mold, automatic stacking table
Slitter Rewinder Superior-FSL-T
Categories : Slitters and Rewinders
FSL-T Slitter Rewinder is designed for slitting all types of flexible packaging films, photonics and optical materials. Such as cellophane, PET, OPP, CPP, PE, PVC, paper rolls, counterfeit-proof labels. The HCI FSL-T is a universal Slitter Rewinder on the market.
Shrink Label Re-reeling and Doctoring Machine-FSP Series
Categories : Shrink Sleeve Machinery
-Efficient operation for inspect the shrink label center gluing quality. -Shrink Label printing and surface inspection. -The FSP Re-reeling and Doctoring Machine provides outstanding performance. It is indispensable procedure prior to automatic shrink label inserting machine.
M6 Series Digital Melt Pressure Gauge - 4-20 MA Retransmission
Categories : Sensing, Monitoring & Inspection Equipment
The M6 Series has an improved digital readout utilizing an extra-large five-digit display. The M6 Series melt pressure gauge provides reliable, maintenance-free, localized pressure indication. The small capillary tube filled with a special medium isolates the gauge housing from potential thermal damage.
Transfer Compression Molding Machine - FCSR Series
Categories : Compression Molding Machines
APPLICATIONS: Small rubber silicon products, rubber capacitor, golf ball.
Twin Type Screws With Extrusion Strainer
Categories : Rubber Extrusion Lines
PRODUCT INTRODUCTION Basically,rubber material is very easy to be mixed with many impurities during mixing processes.No doubt,because of this harmful factor,it can easily cause the follow-up products to result in many defects. But now this innovative design machine can solve this annoying problem efficiently. It not only utilizes the Twin Taper Screw Device to squeeze rubber mixing material into the Single Screw Filter Device effectively but also uses the rotation power to push the mixing material into the die heas and also through the filter net to get rid of the impurities completely. After that,the mixing material can be squeezed out from the compression die to pre-formating. As a result,this new innovative machine can fix the quantity,and consequently obtain an excellent reputation in several industry fields such as Oil seal,O-ring,EVA,Tyre and so on.
Inspection Rewinding Machines INSPECT-SB
Categories : Slitters and Rewinders
This double side inspection rewinding machine is designed for flexible packaging application with fully inspection system. This model is able to inspect both sides of material simultaneously, to ensure the best quality in the minimum time. Suitable for the use of cosmetic, medical and high-end products. Moreover, fully integrated system and user-friendly operation maximize the efficiency. By inspecting both sides, manufacturers ensure that the material meets quality standards for both functional and aesthetic requirements, minimizing defects and maximizing efficiency. INSPECT-SB series is the choice for reaching highest productivity with best quality.
FLEXLIFT linear
Categories : Automation, Robotics & Software
The FLEXLIFT is a robotic system designed for machine sizes 320-570. Its main arm has a handling weight of 15 kg , and it is equipped with a secondary arm that can handle 2 kg , which is intended for separate sprue removal. The system's main axes are servo-electric, enabling rapid, simultaneous movements with high repetition accuracy.
Dynisco 1496 & 1498 Temperature Controllers
Categories : Dosing and Measuring Equipment
• Easy to configure, simple to operate • Single device for heat control-only, heat/cool control, or indicator-only • Universal input • Selectable controller or indicator modes • Heat only or heat/cool control type • Process & loop alarms • Available in 1/16 & 1/8 DIN formats • Modbus RS485 communications • Ramping setpoint
Bag-on-Roll Making Machine Biodegradable Material(GF-R/SV Series)
Categories : Plastic Bag Making Machines
The GF-R/SV Series is a bag-on-roll making machine configured for biodegradable material. It is the biodegradable-film version of JANDI'S servo-driven semi-automatic GF-R/SV bag-on-roll machines: tubular film is sealed and perforated at each bag length and wound into rolls of tear-off bags, using PLA and PBAT based compounds instead of polyethylene.The machine follows the GF-R/SV layout, with a tension-type sealing knife, a perforating knife of teeth or band-saw type, a silicone roller sealing base, a temperature controller and a printing scanner for printed film. Single-line and two-line models are available in the range, with maximum cutting width, cutting length and production speed depending on the model; longer cutting lengths are available on request. Model selection is confirmed at quotation.Type: bag-on-roll making machine for biodegradable material, GF-R/SV SeriesMaterial: PLA and PBAT based biodegradable filmServo drive, semi-automaticTension-type sealing knife with silicone roller sealing basePerforating knife: teeth type or band sawTemperature controller and printing scannerSingle-line and two-line models in the rangeCutting width, length and speed confirmed at quotation
Fully Automatic High Speed T-Shirt Bag & Bottom Sealing with core Bags-On-Roll Making Machine with Hot Slitting and Side Gusseting Devicet
Categories : Plastic Bag Making Machines
The TOSBR-40-G2+OS-C is Ming Jilee's fully automatic high speed T-shirt bag and bottom sealing bags-on-roll (with core) making machine, built with hot slitting and a side gusseting device to produce rolled T-shirt bags in one automated line.It runs a bag length of 350 mm and bag width of 180 - 330 mm, processing film at 0.006 - 0.035 mm thickness at a max speed of 200 pcs/min/line, warmed by a 4 kw heater on a 220V, 3Phases, 30KVA power supply. The line winds a jumbo roll of W1200 x Ø900 mm down to a finished roll of W330 x Ø150 mm.Model: TOSBR-40-G2+OS-CBag length: 350 mmBag width: 180 - 330 mmFilm thickness: 0.006 - 0.035 mmMax speed: 200 pcs/min/lineDimensions (jumbo roll): W1200 x Ø900 mmDimensions (finished roll): W330 x Ø150 mmDimensions (machine): L12150 x W2400 x H2120mmPower: 220V, 3Phases, 30KVA
Shredder Integrated Plastic Recycling Machine
Categories : Crushing, Shredding & Granulating Equipment
Genius Machinery always seeks mutual growth with customers, providing the best solutions. ShredMax, based on this principle, is conceived through continuous brainstorming.
Economy Bottom Seal Bag on roll Making Machine + Manual Roll Change System
Categories : Plastic Bag Making Machines
* Cold-cut system - For thin film material. Machine uses upper heating knife and silicon roller base for sealing. Cutting knife before bag outfeeding. * Manual change rewinder - Cored & Coreless roll changes are done manually.
Memory Hopper 30 Heads Multihead Weigher
Categories : Dosing and Measuring Equipment
Memory Hopper 30 Heads Multihead Weigher
CCS3065-ACP Plastic Film 3-in-1 recycle Pelletizer
Categories : Pelletizing & Compounding Lines
3 in 1 recycling machine combines the Shredder, Extruder and Pelletizer
Fully Automatic Display Book Machine
Categories : Film and Sheet Extrusion Lines
The MGA-68-550 is a fully automatic display book machine built for clear books, display books, and the inner pockets used inside them. It runs the complete process automatically, from the PP hard cover sheet through pocket cutting, dotting, and ultrasonic welding to the hard cover, producing a finished, packaged display book.Seven main units cover the line: PP sheet auto in-feeding, advertising paper auto in-feeding, label film cutting, label film heat sealing, inner pocket sealing, cutting, auto counting and dotting, ultrasonic PP sheet welding, auto packaging, and an auto count conveyor. A special heat sealing knife and cross cutter act in synchronous motion to keep the size of each display book uniform, an edge position controller (E.P.C.) keeps the PP inner pocket neat, and the control and monitor system stops the machine automatically with an alarm if a problem occurs.Model: MGA-68-550Feed material: IPP (Blown film), form for pocketMax film size for sealing & cutting: A4Material thickness: spine labeling film 0.08 - 0.12 mm; inside pocket each layer 0.035 - 0.06 mm; PP sheet 0.4 - 1.5 mmInner pocket cutting cycle: Max. 120 pcs/minOutput: 10 Inner pocket (20 Pages) 6 - 7 pcs/min; 5 Inner pocket (10 Pages) 7 - 9 pcs/minMachine dimension: 8,000 (L) x 5,800 (W) x 2,000 (H) mmMachine weight: 7,000 kgRequired power: 8.5 kw
Fully Automatic Loop Handle Bag Maker with Continuous Sealers LY-800LC
Categories : Plastic Bag Making Machines
Introduction LY-800LC is a high-speed, specialized soft-loop bag making machine. The servo-driven feeding system works perfectly with soft-loop . The unique control of servo-feeding system with continuous sealer provides highly efficient and good quality of production. The human-machine interface is standard part for easy and friendly operation. Features Specialized soft-loop bag making machine. High quality continuous sealing unit for top sealing. Servo-driven feeding system with one set of photocell for printed bag. Human-machine interface for easy setting.
5-Layer Co-Extrusion Blown Film Machine
Categories : Co-Extrusion Blown Film Machines
Extruder 5-Layer PE Group/Recycled/PA/EVOH 5-Layer Co-Extrusion Blown Film Machine 5-LAYER CO-EXTRUSION BLOW
Fully Automatic High Speed Bottom Seal & Star Seal Bag on roll Making Machine (Perforation Bag & S Shape Bag)/ SOSR-1000-R
Categories : Plastic Bag Making Machines
Computer control over the entire process From film roll to final product, one process flow Automatic film feeding, coordination free from tension adjustment Automatically stop when running out of film / color scanning error / film feeding blocks or jam Oscillation film feeding system for stability and high out put
Solar Module Aluminum Foil Welder KUM-4088
Categories : Welding & Surface Treatment Equipment
KING ULTRASONIC Solar Module Aluminum Foil Welder KUM-4088
CCS1030-STC Single Screw Lab-Scale Extruder
Categories : Single Screw Extruders
Suitable for recycling, coloring, laboratory testing, and more.
Sandwich Folding Machine With 1 Colors Rotogravure Printing
Categories : Bag Making Machine by Applications
The MGA-27B-1000+GB-1060A is Ming Jilee's sandwich folding machine with 1-color rotogravure printing, built to fold CPP and BOPP film into sandwich-style sheets while printing a single color in line. It is part of the MGA-27B series, which also includes the -1200, -1400 and -1600 models.Working width scales from 1,000 (W) mm on the base MGA-27B-1000+GB-1060A up to 1,200 (W) mm, 1,400 (W) mm and 1,600 (W) mm on the larger series models, all running at the same output range of 10 - 120 Meter/min, so the width can be sized to the job without changing production speed.Model: MGA-27B-1000+GB-1060AFeed material: CPP & BOPPSize (this model): 1,000 (W) mmSeries sizes available: MGA-27B-1200 (1,200mm), MGA-27B-1400 (1,400mm), MGA-27B-1600 (1,600mm)Output: 10 - 120 Meter/min
Activator
Categories : Hydrographic / Water transfer Machines
Our Activator are engineered to optimally activate water transfer printing films. Packing: 15kgs/ drum
PK_Rodless Rectilinear Displacement Transducer
Categories : Sensing, Monitoring & Inspection Equipment
The absence of a rod lets the cursor be used along the axis for longer strokes. ( Injection presses, woodworking )
Cabinet Dryers - CD
Categories : Dryers and Dehumidifiers
CD series of cabinet dryers are mostly used for simultaneous drying of different kinds of polymers in small quantities or for drying materials for trial molding. They can also be applied in electronic engineering, electroplating, pharmacy, paint baking, printing industries, etc. for preheating or drying related products.
6 Rolls T-shirt Bag Making Machine
Categories : Bag Making Machine by Applications
with automatic packing unit
TPE for Medical Instrument - TM Series
Categories : TPE (Thermoplastic Elastomer)
Ever Polymer has the mission to satisfy all the application needs for thermoplastic elastomers (TPE) raw materials in the market. TPE TPE for Medical TPR tpe material tpe material eco friendly tpe material manufacturer tpe material properties tpe material toxic tpe plastic recycling tpe raw material tpe rubber what is tpe material tpe material safety
