English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
Servo Robot For Mobile Frame Loading
Categories : Automation, Robotics & Software
This industrial robot is used for automatic embedding feeding device for steel sheets for I.M.M, which solves the problem of manual insert(low efficiency, high scrap rate and high production cost). Using magnetic sensor to positioning with 1 axis servo control system make the insert more accurate. HMI interface is easy to operate.
Dynisco Burst Plugs BP420
Categories : Sensing, Monitoring & Inspection Equipment
■ Welded one piece assembly – no degradation of joint strength at elevated temperatures ■ Iconel rupture disk – stable through a wide range of temperatures ■ Burst pressure ranges from 1,000 to 15,000 psig ■ Accuracy of ±10% of rated burst pressure at 300°C (750°F) ■ Leak rate exceeds 1x10-6 standard cc/sec
MONO LAYER BLOWN FILM MACHINE - LE Series (Cost Efficient)
Categories : Blown Film Extruders
MONO-LAYER-HDPE-LDPE-MLDPE-PP 2-LAYER HDPE/LDPE/MLDPE/PP
Mould Dryer / Mold Dryer (AC)
Categories : Dryers and Dehumidifiers
Too high humidity in air may affect the quality of your mold surface because of the condensation forming on the molded surface. An industrial air conditioner is perfect working with preform injection molding machine. The dry air from the industrial air conditioner reduces the condensation while the mold is cooling. That accurately controls the humid around the mold to ensure your product in good quality. P.I.D temperature controller system (IC control panel). Abnormal warning display (IC control panel). Motor overloading & phase-reversing protection. The through-out air temperature from the air conditioner can be adjusted. Special water-exhausting design.
Fully Automatic 3 / 4 Fold Bottom Seal Garbage Bags Making Machine-SE-40-3F / SE-50-3F / SE-40-4F / SE-50-4F
Categories : Plastic Bag Making Machines
Computer control over the entire process From film roll to final product, one process flow Servo motor, as standard attachment, makes it easy to adjust the bag length and production speed Automatically stop when running out of film / film feeding blocks or jam / scanning error
Vacuum Rubber Oil Seal Hydraulic Compression Molding Machine - FCVR Series
Categories : Compression Molding Machines
APPLICATIONS: Automobile & motorcycle oil seal, valve steam seal, V seal, O-ring and rubber seal products.
Standard Model Dispersion Kneader
Categories : Dispersion Kneaders
Compounding For Rubber、Plastic & Chemical Industries Features: This machine most suitable kneading application for all kind Rubber, Plastic and Chemical material This machine with following features: High quality processed products. Easy for operate. Easy for color change.
Flexographic Jumbo Bag Printing Press
Categories : Flexographic Printing Machines
● This Printing Press is Specially Designed for Jumbo Bag Printing. ● Equipped Ink Circulation Pump in Each Color for Manage Proper Ink Consistency. ● Patented Separation Device between Printing Roller and Conveyor Belt to Avoid Stain ●Conveyor During Empty Load. ● 1 to 5 Printing Press Flexibly Provided According to Customer's Demand. ● Custom-made designs are available.
P.P. HIGH SPEED PLASTIC INFLATION MACHINE : KPP-65/75
Categories : Blown Film Extruders
The KPP-65/75 is a high-speed P.P. plastic inflation (blown film extrusion) machine available in two widths — 650 mm (KPP-65) and 900 mm (KPP-75) — for applications such as plastic garment bags.The KPP-65 runs a Ø 65 mm screw (28:1 L/D ratio) with a 30 HP AC driving motor, a Ø300 mm die, and a Ø450 mm air ring; the KPP-75 runs a Ø 75 mm screw with a 40 HP AC driving motor, a Ø450 mm die, and a Ø700 mm air ring. Film thickness is 0.025-0.10 mm for both, with output of 28-60 kgs/hr (KPP-65) and 30-70 kgs/hr (KPP-75).Model: KPP-65 / KPP-75Suitable material: P.P.Film thickness: 0.025-0.10 mmFilm width range: 650 mm (KPP-65) / 900 mm (KPP-75)Film output: 28-60 kgs/hr (KPP-65) / 30-70 kgs/hr (KPP-75)Screw diameter/type: Ø 65 mm / Ø 75 mm, L/D ratio 28:1Driving motor: AC 30 HP (KPP-65) / AC 40 HP (KPP-75) + InverterMachine dimension: 500x200x400 cm (KPP-65) / 730x450x470 cm (KPP-75)
Plasma - J4
Categories : Welding & Surface Treatment Equipment
Plasma Treater Country of Origin：Taiwan Plasma treaters produce plasma surface treating to promote the adhesion of inks, adhesives, coatings, sealants & paints. Manufacturers integrate in-line plasma treatment equipment to enhance adhesion on plastics, composites, metals & glass surfaces. The plasma pretreatment process cleans, etches, & functionalizes surfaces to activate bonding sites by increasing wettability & surface energy.
TS Swing Type Clamps
Categories : Quick Mold Change and Clamping Systems
This system is hydraulically controlled and uses a swing motion to lock the dies or plates in place once it is positioned. It offers very secure clamping and is available in three different models.
High Speed Cutting Machine - FSC-201 Pvc
Categories : Cutting Machines
This cutting machine is suited for perforating and cutting operations for various shrink labels (shrink sleeves). It provides flexible cutting profiles of the product. Also for electronics, computer and optical materials, film roll and foil roll cutting operations. Series Models: FSC-201, 301, 501 Pvc Cutting Machine
Automatic Drilling, AL.Foil Sealing & Capping Machine
Categories : Extrusion Coating Machines
● There are three functions in this machine, and you can operate them individually or synchronously. ● With additional conveyor for feeding tubes automatically. ● No tube, no sealing and capping.
IN LINE SHUTTLE TRACK BAG MAKING MACHINE
Categories : Plastic Bag Making Machines
TA-S-750,TA-S-1000,TA-S-1250,TA-S-1500,TA-S-1750,TA-S-2000,TA-S-2250,TA-S-2500
Accumulator Head Blow Moulding Machine for Table Top
Categories : Extrusion Blow Molding Machines
Compact design with less footprint Energy saving with high/low pressure circuit ONE HMI for total operation function Remote access for support diagnosis and troubleshooting Product range up to 22kgs shot weight
Twin-Cone High Speed Pelletizing Machine-Underwater Cutting
Categories : Pelletizing & Compounding Lines
Suitable for high viscosity raw materials, such as PP, PMMA, TPU, PU, PLA, PET, TPU, PU, PLA and etc. High viscosity raw material. High Capacity, Low electricity usage, Easy to clean and change materials, Knead well, Underwater cutting
Automatic Strand Pelletizing System
Categories : Pelletizing & Compounding Lines
Born For Extreme Automation The molten polymer been extruder from the die, fall into automatic water flow. High-pressure water flow from a special designed spray nozzle pulls the strands immediately while cooling at the same time. No more drawing strands before pelletizing. Minimize the lump waste during drawing the strands. GENIUS
HDPE / LDPE / LLDPE (A/B/A) TWO LAYER : KMTL-50S
Categories : Blown Film Extruders
The KMTL-50S is a 2-layer ABA blown film extrusion line for HDPE, LDPE, and LLDPE film, used in applications such as car film, food packaging, and courier bags.The extruder unit runs Ø 50mm ×2 screws with a 30:1 L/D ratio and 25.8 kw of heating capacity across 8 auto thermo zones, feeding a rotating die (die diameter H: 100/150 mm, A/B/A) with a Ø 165 mm air ring for bubble cooling. A servo-driven take-up (1.5 kw) and winding unit (1 kw) handle the film at speeds up to 100 m/min, producing film from 0.010-0.15 mm thick and up to 1200 mm wide.Model: KMTL-50SSuitable material: HDPE / LDPE / LLDPEFilm thickness: 0.010-0.15 mmFilm width range: 1200 mmFilm output: 90-140 kgs/hrScrew diameter: Ø 50mm ×2, L/D ratio 30:1Die diameter: H: 100/150 mm (A/B/A)Driving motor: AC 30 HP + InverterTake-up speed: 100 m/min
CNC AC Servo Beam Robots - Redstone Series
Categories : Automation, Robotics & Software
The Redstone series of robotic arms are used for various types of horizontal plastic injection molding machines of 50-800 tons. There are 3-axis and 5-axis AC servo drives. The product arm robot is for taking out products and runners. The vertical arm structures are single stage and telescopic stage, runner arm can be added to take out runner. The Redstone series of robots are suitable for high-precision, high-speed removal and embedding/insert, with fast response and high positioning accuracy for quick removal for single cavity and multiple cavities and embedding/insert applications.
Dual-Line Analog Input Process Meter - DL Series
Categories : Sensing, Monitoring & Inspection Equipment
Viatran's multi-purpose, easy-to-use DL Series analog input process meters are ideal for level, flow rate, temperature, or pressure transmitter applications. They accept current and voltage signals (e.g. 4-20 mA, 0-10 V). Three of the front panel buttons can be custom-programmed for a specific operation. The analog input can be scaled to display the process in two different scales; for example, the main display could indicate level in feet and the second display could indicate the volume in gallons.
F-1 AFC series AC Power Source
Categories : Transmission, Motors & Drive Systems and Gears
The AFC Series is an economically priced AC power source to provide reliable voltage and frequency simulation for general applications, such as testing for home appliance, electronic, medical equipment, lighting and other fields of production or R&D. Utilized PWM switching technology, AFC provides high quality pure sine waveform with output level up to 2,000kVA. The AC source is coupled with output voltage range of 5~300V and output frequency of 47~63Hz, 50/60Hz fixed. User can select optional frequency output of 2 or 4 times standard frequency and 400Hz.
PLASTIC GLOVE BAG MAKING MACHINE
Categories : Bag Making Machine by Applications
Designed to produce disposable gloves for food handle or any bag with irregular shape. Can be two molds to have more production. Without photocell Purchasing optional double cutter, conveyor & heat needle devices can produce flat bags in the same machine to let the machine have several functions like flat bags, glove bags & irregular bags. Optional servo motor for better length adjustment & easier operation We didn’t show all specification & model, please kindly contact us for other model & details specification
PY1_Rectilinear Displacement Transducer
Categories : Sensing, Monitoring & Inspection Equipment
Compact. Double support for measurement rod. Side connection permits through-rod structure, guaranteeing greater overall sturdiness of the sensor. Model PY1 has a joint for greater tolerance in movement. PY2 and PY3 automatically position the head thanks to the return spring, making them the best solution for precise checks on cams or products leaving an automatic production line. ( Geotechnics, sanders, ceramic machines (thickness and planarity check), woodworking machines (thickness and planarity check )
Inspection Rewinding Machines-INSPECT-V
Categories : Slitters and Rewinders
This inspection rewinding machine for finished roll is designed to handle and inspect rolls of material that have already undergone slitting. It supports quality control process, and enables efficient roll rewinding. Additionally, the function of flag detection feature makes it easier to locate flags and perform corrections as needed. This inspection rewinding machine is critical equipment for ensuring that the finished rolls meet quality standards before being pouched or sent for final use.
Intermesh Dispersion Kneader Mixer For Rubber And Plastic
Categories : Dispersion Kneaders
The new technology design of this dispersion kneader is equipped with a unique engage-type rotor for mixing/kneading rubber / plastic compounds with different characteristics. The special features are as follows: Fast mixing time. 3-8 mins / batch (depends on different material characteristics, feeding time,cleaning time, and so on) It is specialized for materials requiring low temperature, high oil consumption, and materials with very low hardness, ensuring homogeneous distribution and the highest degree of dispersion mixing. Construction of machine is strong and stable, with no shaking during mixing processes. Accurate temperature control system. Efficient cooling system. Can be applied for different composite materials. Pressure lid is driven by oil hydraulic system which can be adjusted to reduce energy consumption.
All Electric 3 Layer, Double Station Blow Moulding Machine for Plastic Bottle Making
Categories : Electric Blow Molding Machines
All Electric 3 Layer, Double Station Blow Moulding Machine for Plastic Bottle Making Energy Saving Power consumption 40~50%↓ Production output 20~25%↑ ECO No hydraulic oil, no pollution, Noise level 20dB reduced. Industry 4.0 Smart manufacturing, with SCADA system.
Mono Layer Bottom Blow Moulding Machine for 20lt~30lt Jerry Can
Categories : Blow Molding Machines by Layers
Mono Layer Bottom Blow Moulding Machine for 20lt~30lt jerry can Single Head, Single Station
Fully Automatic High Speed 2 Lines with Core T-Shirt & Bottom Sealing Bags on Roll Making Machine with Slitting & Gusseting Unit-STBCR-40-G2+OS+2W
Categories : Plastic Bag Making Machines
Computer control over the entire process From film roll to final product, one process flow Automatic film feeding, coordination free from tension adjustment Oscillation film feeding system for stability and high out put Automatically stop when running out of film / film feeding blocks or jam Automatically core changing system Punch system on magnetic roller
Low-Speed Crushing Machine - C-S210 / 260 / 310 / 420 SB
Categories : Crushing, Shredding & Granulating Equipment
● Slanted tooth rotary cutter for increased cutting power ● Produces little powder and low noise. ● Suitable for materials with high fiber content.
Dry / Wet Laminating Machine (WDWL Series)
Categories : Industrial Lamination
New model of Laminating Machine. Worldly multi-function and high efficient dry & wet laminating machine can apply to working on various materials. Especially the design of two-in-one function has outstanding performance; moreover it can economize your investment cost. Worldly multi-function laminating machine will increase your production and create infinite advantages for future benefit. -Low wastage -Drying tunnel guiding roller is motor driven and is synchronized with the line speed -Coating unit smoothing roller for uniform glue coating over the entire surface -Three roller press design on lamination unit provides rigid and uniform pressure for the highest quality laminations -Foil unwinder
PP Woven Bag Printing Line - JLRPM-SERIES
Categories : Flexographic Printing Machines
Helical toothed gear drive from main motor to each printing station Automatic hydraulic plate drum throw off during printing stop High speed printing with high printing quality
Air Bubble / EPE Coreless Rewinding Machine
Categories : Slitters and Rewinders
The MGR-MINIROLL-1600 is Ming Jilee's coreless rewinding machine, purpose-built for rewinding air bubble film (bubble Ø 10 mm) and EPE foam (thickness 1 - 5 mm). It uses an integrated heat needle sealing system in place of traditional tape sealing, plus a cantilever shaft design for quick loading of the mother roll.A proximity switch control automatically stops the machine in case of malfunction, and a fully motorized nip roll cylinder with a built-in pneumatic cutting mechanism keeps material feeding stable and cutting precise. An optional tape dispenser is available for sealing finished rolls. Width of production reaches Max. 1,600 mm, with rewinding dia of 80 - 300 mm and roll length of 3 - 30 meter.Model: MGR-MINIROLL-1600Feed Material: Air bubble film bubble Ø10 mm; PE foam 1 - 5 mmWidth of Production: Max. 1,600 mmLength of the Produce Rolls: 3 - 30 meterRewinding dia: 80 - 300 mm (with air bubble film 2 layers Ø 10 mm)Production Speed: 5 m roll 140 - 180 rolls/hour; 10 m roll 120 - 180 rolls/hourMachine Weight: 1,600 kgPower Consumption: 10 kw
High Precision Injection Mold
Categories : Injection Molds
-Design & Development of Diversified Precise Molds -Mold flow analysis & optimized solution for mold design -Specialized molding system: Sale & Integration (PET/IML/Medical series) -Turnkey Solution Planning & Technology Transferring (operators’ training included)
E-1 Intelligent Transformer AVR / Stabilizer (PS-B)
Categories : Electronic, Automation and Safety Components
Specially for transformer & voltage regulation equipment Specialized design of voltage regulator and voltage transformation, changing from 3 phase 380V to 3 phase 220V at capacity between 12 and 15 KVA. The equipment is most suitable for matching with precision machine for export. Control and mechanism of PS series Intelligent model has the function of voltage transformation, voltage regulation, warning and protection.