HDPE HIGH SPEED PLASTIC INFLATION MACHINE : KMH-35

Classification : Plastic Inflation Machine

KANG CHYAU INDUSTRY CO., LTD.

Country: Taiwan

Phone: 886-2-22856880

Fax: 886-2-22856883

Contact Person: Gina Kang

E-catalog Inquiry Now

The KMH-35 is a high-speed HDPE blown film extrusion line within PRM-Taiwan's plastic inflation machinery category, where HDPE resin is extruded and inflated into tubular film through a die and air ring before take-up and winding. The KMH-35 produces HDPE film in 0.008-0.10 mm thickness and up to 400 mm width, with output between 10-28 kgs/hr.

The extruder uses a Ø 35 mm screw at a 26:1 L/D ratio, driven by an AC 15 HP motor with inverter and backed by 3-zone auto thermo control on the barrel. The die unit runs a Ø50/80 mm die with a Ø120 mm air ring, and the take-up section operates at speeds up to 85 m/min.

KMH-35

Film Width100-400 mm

Screw Dia.Ø 35 mm

Suitable MaterialHDPE

KMH-35 model High-speed HDPE Blown Film Extrusion Line

MODEL	KMH-35
SUITABLE MATERIAL	HDPE
FILM THICKNESS	0.008-0.10 mm
FILM WIDTH RANGE	400 mm
FILM OUTPUT	10-28 kgs/hr
EXTRUDER UNIT
SCREW DIAMETER/TYPE	Ø 35 mm
SCREW L/D RATIO	26:1
HEATING CAPACITY	5.7 kw
AUTO THERMO CONTROL	3 zone
BARREL COOLING FAN	1/8 HP×1
DRIVING MOTOR	AC 15 HP + Inverter
DIE UNIT
DIE DIAMETER	Ø50/80 mm
AIR RING DIAMETER	Ø120 mm
HEATING CAPACITY	4.6 kw
AUTO THERMO CONTROL	1 zone
COOLING BLOWER	3 HP
TAKE-UP UNIT
TAKE-UP ROLLER	500 mm
EFFECTIVE WIDTH	400 mm
TAKE-UP MOTOR	AC 1/2 HP
TAKE-UP SPEED	85 m/min
ELEVATING MOTOR
WINDING UNIT
ROLLER WIDTH	500 mm
WINDING WIDTH	400 mm
WINDING MOTOR	DC 1/2 HP
MACHINE DIMENSION	350×260×310 cm