English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
2RT Mold-Open None Runner-Waste Rubber Injection Molding Machine
Categories : Rain boot Injection Molding Machines
2RT Mold-Open None Runner-Waste Rubber Injection Molding Machine Nature rubber Rubber of metal boned parts Oil resistance rubber NBR+PVC concoction Synthetic rubber Medical/Pharmaceutical usage rubber Heat resistance rubber
for Electrical Injection Molding Machine- TGSM Series
Categories : Transmission, Motors & Drive Systems and Gears
Features: Save power & suitable for big tons of output in production High torque, High rotation speed, Less abrasion & low noise. Lubrication System: Oil Forced Type Reach AGMA 10 LEVEL & UP Gear material: SCM420 Shaft: SCM440 Stable output during injection, Power starts when the material has been delivered and stops automatically when no material is detected Motor Flange & Input Shaft customized available as per request.
PVC、EVA、PP/PE + CaCo3、LSNH PVC+NBR、TPR Compounding System
Categories : Compounding Lines
•Pellets for Medical Tubes •Injection Tube (Medical Use) •Cable & Wire Pellets (LSNH) •Cable & Wire
Heavy Duty Double Toggle Injection Molding Machine
Categories : Horizontal Injection Molding Machines
The new design has ensured maximum space between tie bars, as well as a large daylight area. The fixed and moving platens are designed in such a way that the yensure complete accuracy and precision. The injection carriage uses a balanced double hydraulic cylinder to provide a secure hold between the mould and the nozzle to eliminate nozzle leakage. Linear guide ways reduce mechanical friction, decrease machine wear and increases accuracy over back pressure providing better control of the injection sequence. Bosch proportional valves are equipped with LVDT positional feedback and pressure transducer. The speed of the proportional valves is more precise resulting in more accurate control.
2RT Mold-Open silicone Injection Molding Machine
Categories : Silicone Injection Molding Machines
Features Mold opening design The 3RT surpasses the traditional top opening mold that can be used for the triple or four molds with the design of the opening mold and pushing out the mold in the between. The opening mold can be adjusted by the software with separate opening, separate pushing out the mold in between, continuous opening and continuous pushing out the mold in between.
Micro Injection Molding Machines
Categories : Micro Injection Molding Machines
Quick and cost-effective mold solutions. Small order are available. (min. order of 300 shots) Product weight：From 0.001 gram to 8 grams. Product dilensions：From 1mm to 20mm. Materials：Quality can vary from regular grade to engineering grade all kinds of thermoplastics, even high temperature resins. (Ex. PP,PE,ABS,POM,PA,PC,COC,LCP,PEI,PPSU and PEEK.)
DG-B Series Special-Purpose Bmc Injection Molding Machine
Categories : Automatic Injection Molding Machine
BMC is material mixed by unsaturated polyester, filling agent, coloring agent, releasing agent, catalytic agent and glass fiber. Not only with excellent heat- resistant, mechanic character, electric insulation, stable contractibility, suitable for any electric products of no-fuse-breaker, but also with high intensity, exact size, outstanding appearance, suitable for OA products as copy machines or printers, audio spare parts and car light-housing, etc.
C type Injection molding machine with rotary table
Categories : Rubber Injection Molding Machines
C type Injection molding machine with rotary table With C type configuration to have easy operation access. Rotary table design with two molds shifting to increase production efficiency. Feeding rupture detect to prevent process from rubber shortage. With external heating platen to maintain mold temperature. Automatic operation can be realized by having the auto de-molding device and cleaning system. Rotary table is driven by servo motor which can offer multi-station production with different positions stop. User-friendly color touch screen interface to facilitate all parameters settings and observation. Option available: Auto de-molding device and cleaning system. OPC-UA configuration to connect with MES/ERP system. With the Cold Runner Block (CRB+) control system.
3RT Mold-Open Rubber/Silicon Continuous Transfer Injection Molding Machine-TCC-S3
Categories : Compression Molding Machines
●Nature rubber ●Rubber of metal boned parts ●Oil resistance rubber ●NBR+PVC concoction ●Synthetic rubber ●Medical/Pharmaceutical usage rubber ●Heat resistance rubber
Austrian KEBA controller I series control unit
Categories : Control Equipment
EUROPEAN QUALITY ELEMENTS ENSURE PERFECT PERFORMANCE FOR IMM ● High-performance 32 bit processor ● All I/Os for standard injection molding machines ● PWM current outputs for direct control of proportional valves ● Optimized digital outputs for hydraulic switching valves ● Thermocouple inputs for different types of sensors ● Pulse input for screw speed ● Ethernet connection for host computer ● USB connection for printer, modem, USB stick, etc.
Single-Stage Injection Stretch Blow Molding Machine - ISB Series
Categories : Injection Blow Molding Machines
GF/ISB series adopts the world's most advanced single-stage injection stretch blow molding machine technology. One single machine is able to achieve high quality and efficient productivity. Compared with two-stage PET machines, GF/ISB possesses several advantages. Golfang
Toggle Energy Saving Injection Molding Machine Servo 90E to Servo 570E
Categories : Horizontal Injection Molding Machines
● Effective Energy Saving Unit ● Outstanding Hydraulics ● ASE Servo Pump
2RT Mold-Open Tire Bladder Rubber Injection Molding Machine IRH-S2
Categories : Shoe Sole Making Machines
Mold opening design The 2RT surpasses the traditional top opening mold that can be used for the double or triple molds with the design of the opening mold and pushing out the mold in the between. The opening mold can be adjusted by the software with separate opening, separate pushing out the mold in between, continuous opening and continuous pushing out the mold in between. tyre bladder
YD Vertical Four-Column/Two-Color Rotary Table-Vertical Clamping and Vertical Injection Molding Machines
Categories : Vertical Injection Molding Machines
A. Standard double injection Vertical 4-columns direct-pressure clamping. In the upper mold plate, two separate vertical injection units is installed(separate injection hydraulic oil route) with the addition of round disc for this double injection machine. - Clamping force is 90- 500TON. Computerized and exclusively configured hydraulic system is used, which is more suitable for the production of general products( or special double-material) injection molding. - Two molds are installed on the upper mold plate while three lower molds are installed on the disc. When molding, the disc rotates alternatively at 120°to complete the two-color (two-material) injection molding or overmolding. - Highly efficient disc with water jacket device in the middle for cooling of the lower mold. - Expandable computer programs and special multistation disc (i.e. two upper molds and four lower molds). In the two lower modes, automated embedding and removing devices can be installed optionally to achieve automation of the whole machine work and increase production efficiency. B. Other double injection machine: - Type 1: A set of independent vertical “injection units” is added onto the upper mold plate of the original injection machine to form a double injection machine. Example: YH / YR / YC models + vertical injection. - Type 2: On the original injection machine, one or more sets of independent horizontal (level) injection units is combined to form a double injection machine. - Example: YH / YR models + horizontal injection - Type 3: The two-colors injection molding machine is combined to form a double injection machine by sharing a common disc. - Example: a. YH model + YT model + disc (2 ~ 4 stations) b. YH model + YH model + disc (2 ~ 4 stations)
Multiple Embedded Rotary Injection Molding Machine-YR Series
Categories : Vertical Injection Molding Machines
• Vertical clamping with vertical injection. • Rotary table oscillate 180 °, rotate back / forth for easy loading and finished parts pick out, to increase productivity. • Rotary table with location pin, accurate positioning for mold alignment and automation. • Robot interface capability for complete automation. • Standardized wtih 2-sation function, and capable for 3-station or 4-station function & automation linkup for advanced efficiency. • Standardized wtih 3-column clamp, and available for 4-column clamp upon request.
Preform Injection Molding Molds
Categories : Injection Molds
Professional PET injection molding machine. Whole plant export includes know-how Special use extrusive screw. High mixes for PET plasticity. Digital control system uses 4 CPU computer systems. Heat treated stainless steel molds for a long service life - guaranteed 2 million times. Japan SEIKI hot runner, air valve, and auto temperature control. Double circuit negative pressure chiller. Technical consulting service is available by request.
DOUBLE INJECTION MOLDING
Categories : Injection Molds
Double Injection, sometimes known as 2 material 2 shot molding or 2K molding, is an innovative manufacturing process used to produce complicated molded parts from two different materials. Through a highly specialized and automated process we carefully control the injection of multiple materials, including two different kinds of resin, into a single, multi-chambered mold. Double Injection in performed on one machine that is programmed to perform two injections in one cycle. In the first cycle, a nozzle injects plastic into a mold. The mold is then automatically rotated and a different type of plastic is injected into the mold from a second nozzle. Double Injection Molding optimizes co-polymerization of hard and soft materials to create powerful molecular bond. The result is a single part with production and feature advantages. It can be used for a variety of product designs across all industries. It also allows for molding using clear plastics, colored graphics and stylish finishes which improves your product functionality and marketplace value.
Thermosetting Injection Molding Machine 90BBE to 400BBE
Categories : Horizontal Injection Molding Machines
● EXTRA ELEMENTS FOR THERMOSET PROCESSING ● SPECIAL SCREW BARREL DESIGN FOR THERMOSET MOLDING ● THREE-STAGES HEATING COMPONENT FOR KEEPING THERMOSETS UNDER A PERFECT PLASTISIZING CONDITION
Standing rain boot mold (single-color and two-color)
Categories : Injection Molds
Standing rain boot mould (single-color and two-color) shoe mold, shoe mould, mould on shoes, mould shoes,mould in shoes Rain boots, boots, work shoes, gumboot,pvc shoe,eva shoe,pvc boot,plastic shoe,injection shoe
Dual / Two Color Injection Molding Machine DNT Series
Dual color injection molding machines are dual color demand with two injection units that enable to perform two color at one time and spare second processing time.
LIQUID INJECTION MOLDING
Categories : Silicone Injection Molding Machines
Liquid Injection Molding (LIM) and Transfer Molding are preferred processes for manufacturing solid silicone rubber items used in a wide range of applications such as medical equipment, watersports, gas masks, military gear, waterproof device cases, 3C products and much more. MATERIALS: Shin Etsu / Dow Corning/ GE Silicones ADVANTAGES & APPLICATIONS: Low viscosity and lower injection pressure, good for silicon molding Good chemical stability and environmental protection High dimensional accuracy It produces high quality parts without secondary finishing and allows much shorter production cycles than other processes. Over-molding together with hard plastic frame (PC or ABS etc.) for waterproof devices, shock proofing, shielding, etc. Very thin wall design (0.25mm thick around) for silicone to adhere on plastic housing (rib) to meet the demand of low profile product design. Water proof feature can be secured by the combination of soft rubber contacts and with constant pressure provided by hard plastic housing (rib).
E Series Servo-electric Injection Molding Machine
Categories : Electrical Injection Molding Machines
The "E-series" had created excellent performance, due to the best application of servo motor.
DG-P Series Special-Purpose Pet Injection Molding Machine
Categories : Electrical Injection Molding Machines
Recently, PET material is used greatly on producing containers, and gradually substitutes PP, PE, PVC material. Due to the characteristic of PET, the screw design is different from general. Besides, during producing mold, when the alternation of coldness and heat, the mold surface will be liable to congeal to mist when it touch with air. This affects its process of crystallization largely. Therefore, it is significant to maintain the temperature stable at clamping side; and DG-P series injection molding machine is particular to PET material producing.
Vertical Clamping Vertical Injection Machine-YH Series
Categories : Vertical Injection Molding Machines
- Four-column/vertical clamping, vertical injection. Rectangular shape between tie bars for easy insert. - Twin injection cylinder balanced for smooth and powerful injection. - Simple structure, small occupancy. - Double action clamping cylinder for fast clamping, slow speed high-pressure clamping. - Single sliding pushes the lower mold out for easy loading/unloading. - Double sliding use two lower mold, machine molding the parts while the operator is loading the other mold, to increase productivity.