English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
INSERT INJECTION MOLD
Categories : Injection Molds
INSERT MOLDING TECHNOLOGY: When a metal, plastic or ceramic part needs to be embedded in plastic to improve product structure it is called Insert Molding. It is a widely used process and one that YOMURA TECHNOLOGIES specializes in. With Insert Molding, a part is placed in a mold cavity then a selected plastic material is injected directly over it resulting is a single part with the insert(s) encapsulated by the material. This process normally uses engineering plastics for improved wear resistance, tensile strength and weight reduction. Insert Molding can be a highly efficient alternative to the assembly of discrete parts using soldering, connectors, fasteners, or adhesives. It also expands plastic capabilities and can reduce final product cost by limiting the amount of costly metal needed to create a part. And importantly, because we can use conventional single shot injection machines for Insert Molding, tooling costs are lower than with a multi-shot processing. Benefits: Reduced assembly and labor costs Because insert molding joins numerous components with thermoplastic, assembly and labor costs are greatly minimized. For example, a single stamping can be overmolded, then perforated to create multiple circuit paths. Reduced size and weight By eliminating fasteners and connectors, and by combining the physical strength of resin and metal inserts, insert molding yields smaller and lighter components. Increased reliability With every part tightly secured in thermoplastic, an insert molded component prevents part loosening, misalignment, improper terminations, and other problems. The thermoplastic resin also provides improved resistance to shock and vibration. Increased design flexibility Designers appreciate the virtually unlimited configurations that insert molding allows. For example, in creating a 3D circuit board, overmolding permits circuitry to move freely through the part, from inside to outside, up walls, down in holes-and the plastic ties it all together. Materials: Engineering plastic or Thermo Plastic Rubber (TPR) inserted with metal frame die casting, plated copper pin, sockets, wire frames, etc. Applications: TPR + Metal Frame(3C Mechanical Parts) ABS + Al. Die Cast (Sports/ Medical) Eng. Plastic + Patting Pin/Eng. Plastic + Wireframe (Connector) Eng. Plastic + Copper Pin/Contact (Precision Electronic Component)
Vertical Electric Injection Molding Machine-YE-50V
Categories : Vertical Injection Molding Machines
A number of patented electric injection device Precision electric injection function Precision electric metering function Electric pedestal does not slide function Energy-saving hydraulic servo mold clamping function Accurate low pressure off mode protection function Energy-saving hydraulic servo thimble function Template rust plating processing Template parallelism fine tuning function Template low-top design With 8 T-groove, easy to fix the mold Thick template with high tensile guide posts Configuration template guide column anti-drip bumper sleeve Configure mechanical closing safety bars Configure mechanical shut-off safety electrical protection Open all the safety gates to stop the design Configuration key type safety door safety switch Configuration rail horizontal operation safety gate design Injection device can be flipped to maintain the factory accuracy to reduce the height of the handling method Injection closed loop feedback function Holding pressure switching point accuracy of 0.01mm Packing pressure accuracy of up to 0.1% High-speed rigid filling, to eliminate floating phenomenon Prevent the drawing function A variety of peripheral equipment chain function Equipped with peripheral equipment power outlet With robot centralized terminal block Hopper holder moving function Equipped with resin feed tube holder Equipped with adjustable height white iron trough Equipped with a perspective control water divider Equipped with cooling water quick connector The machine is neat and without any pipe exposure Than the same level of oil-saving 25% to 60% Than the same level oil machine to save cooling water 70% Equipped with 10.4 "color touch screen PID automatic temperature adjustment function Japan's Mitsubishi control system Equipped with wear-resistant material pipe
HOPPER FEEDING & DIE FACE CUTTING PLASTIC RECYCLING & PELLETIZING MACHINE
Categories : Plastic Pelletizer Machines
Suitable for shredded fragments from rigid plastics and injection materials
Grille Injection Molds
Categories : Injection Molds
Grille Injection Molds Applications: Grille for Cars Air bag Cover Cup Holder for Cars Dashboard Vent for Cars
Liquid Silicone Rubber Injection Molding Machine
Categories : Rain boot Injection Molding Machines
Applicable for the production of vehicle parts, electronic and medical goods, infant care and food products etc. Save time for production process and increase productivity. The best solution to support quality and efficiency. oxygen mask
OVER INJECTION MOLD
Categories : Injection Molds
Over Molding is the process where one material is precision molded over another material, usually rubber (TPE) over plastic, for visual or ergonomic appeal. Very often when the design requires ” soft touch” or waterproofing (IP68), over molding is the manufacturing process that we will use. For over molding success, knowledge of material compatibility is crucial. Our extensive expertise in this field helps assure your end part will have the strong end-application bond and performance that your product success demands. Insert molding can also be combined with over molding using parts made of aluminum, brass, stainless steel, copper, plastic and more.
BMC Injection Molding Machine - 300BMC to 850BMC
Categories : Horizontal Injection Molding Machines
Common commissioning for molding products such as electric parts and auto headlamps with insulated characteristics. Steel and FRP plates are installed on the fixed and movable platens to insulate the heat generation from the thermoset mold.
3D CAD simulation figure & ABS + CNC proofing
The biggest problem in rain boot mold creation is discussion. In the past, 2D sketches were used to discuss patterns and then reference samples were used to assist imagination between both sides. However, rain boots are composed by the curvature of the curved surface of the high variation.Only by 2D sketches and sample auxiliary may lead to a gap between imagination and practices, resulting in continuous modification. Rain boot mould：PVC wellies, boots or foam material wellies and boots shoe mold, shoe mould, mould on shoes, mould shoes,mould in shoes Rain boots, boots, work shoes, gumboot,pvc shoe,eva shoe,pvc boot,plastic shoe,injection shoe
C type Injection molding machine with rotary table
Categories : Rubber Injection Molding Machines
C type Injection molding machine with rotary table With C type configuration to have easy operation access. Rotary table design with two molds shifting to increase production efficiency. Feeding rupture detect to prevent process from rubber shortage. With external heating platen to maintain mold temperature. Automatic operation can be realized by having the auto de-molding device and cleaning system. Rotary table is driven by servo motor which can offer multi-station production with different positions stop. User-friendly color touch screen interface to facilitate all parameters settings and observation. Option available: Auto de-molding device and cleaning system. OPC-UA configuration to connect with MES/ERP system. With the Cold Runner Block (CRB+) control system.
Single-Stage Injection Stretch Blow Molding Machine - ISB Series
Categories : Injection Blow Molding Machines
GF/ISB series adopts the world's most advanced single-stage injection stretch blow molding machine technology. One single machine is able to achieve high quality and efficient productivity. Compared with two-stage PET machines, GF/ISB possesses several advantages. Golfang
Motorcycle Injection Molds
Categories : Injection Molds
The appearance of surface mainly finished in texture or plating. Meet customer high requirements for product fitting.
Rubber Back-Injection Molding Machine
Categories : Rubber Injection Molding Machines
Rubber Back-Injection Molding Machine Nature rubber Rubber of metal boned parts Oil resistance rubber NBR+PVC concoction Synthetic rubber Medical/Pharmaceutical usage rubber Heat resistance rubber
MICRO MOLDING
Categories : Injection Molds
Micro molding is a very specialized art form, which is a kind of tooling design , manufactures small and precision plastic components with polymer-based functional devices, by increasingly demanded in the fields of life science, electronics, medical, photonics, automotive, and aerospace. The tiny-scale molding form of injection molding that entails building a cavity to match the shape of the part you want to make, sort of like the plastic molding that makes Lego bricks. THERE ARE THREE DIFFERENT THINGS TO KEEP IN MIND WITH MICRO MOLDING : Micro means the size of the part. It is the most common definition when dealing with micro molding. Micro features relates to tiny parts on a larger part. As a whole, the part can be big, but its components can be smaller, or micro features. Micro tolerance is how the parts are measured and how close to the needed measurement the part has to be to be considered a good or usable part. When a part is molded, it has to measure within the needed measurement (the tolerance), which could be as small as a thousandth of an inch. Small parts that are simple to make have tolerances that are not as tight and would be considered regular molding. SOME ADVANTAGES OF DESIGN GUIDE IN YOMURA AS : Dimension Aspect ratios around 6:1 (material dependent) Wall thickness : 0.3 mm ( 0.012”) min. for plastic Hole dimension : 0.2mm ( 0.008”) – 0.5mm ( 0.02”) min. Pitch of hole : 0.3 mm ( 0.012”) – 0.50 mm ( 0.02”) min. Tolerance (min) : 0.01 mm ( 0.0004”) – 0.02 mm ( 0.0008”).
2RT Mold-Open Tire Bladder Rubber Back-Injection Molding Machine
Categories : Rubber Injection Molding Machines
The 2RT surpasses the traditional top opening mold that can be used for the double or triple molds with the design of the opening mold and pushing out the mold in the between. The opening mold can be adjusted by the software with separate opening, separate pushing out the mold in between, continuous opening and continuous pushing out the mold in between. tyre bladder
30% Glass Fiber Reinforced Nylon 6 Material (PA6 GF30)
Categories : Composite Material
PA6 30% Glass Fiber Reinforced (PA6 GF30), also known as PA6 GF30 material or 30 glass filled nylon, is a widely used engineering plastic with excellent mechanical strength, rigidity, and heat resistance. This nylon compound performs consistently across different environments, offering easy injection molding, a smooth surface finish, and robust structural support.
Servo Energy Saving Injection Molding Machine CX-60 – CX-1600
Categories : Horizontal Injection Molding Machines
APPLICATIONS:Packaging,Optics,Electronics,PET Preform,Closures,Cutlery,Thin Wall,Automotive
EP - Packaging Injection Molding Machine
Categories : Automatic Injection Molding Machine
● vertical servo motor clamping system. ● Horizontal parting line injection system. ● Sevor motor and air pressure system. ● FUJI 7” full color TFT-LCD touch panel controller. ● 3 stages injection 2 stage holding pressure and 100 mold data can be saved. ● All-electic injection system, the most precise packaging quality. ● Dual protection of restart button and safty light curtains.
Pepper cap 8 holes
Categories : Injection Molds
JIN CHIA HUNG specializes in the design and manufacturing of 8-hole pepper cap injection molds, offering complete mold configuration and production planning to reduce mold development and testing time. Made with premium German mold steel (such as SKD11), our molds deliver superior accuracy, long-term stability, and extended service life. Each mold is rigorously inspected before shipment, ensuring reliable quality for use in spice containers, food packaging, and kitchenware applications.
Single-Stage Injection Blow Molding Machine - IB Series
Categories : Injection Blow Molding Machines
Advanced Single Stage Blow Molding Machine Commonly used in the production of pet bottle, the mechanical design of Golfang Single Stage Blow Molding Machine is based on the blueprint of the world's most popular machine- the plastic injection machine with pressure booster ram system. Solid construction, durability, high precision, high stability, easy operation, easy maintenance and low running cost.
2RT Mold-Open silicone Injection Molding Machine
Categories : Silicone Injection Molding Machines
Features Mold opening design The 3RT surpasses the traditional top opening mold that can be used for the triple or four molds with the design of the opening mold and pushing out the mold in the between. The opening mold can be adjusted by the software with separate opening, separate pushing out the mold in between, continuous opening and continuous pushing out the mold in between.
CE Certificate Rubber Back-Injection Molding Machine
Categories : Rubber Injection Molding Machines
A special design of two-stage material supply is adopted. It expels bubbles out of the raw material in the most effective way and there is no dead material.
Non-Return Valves (Screw Tip)
Categories : Screws and Barrels
The key of the injection - We provide lots of materials for all kinds of design. Both for ODM or OEM are available for you. Non-Return Valves plays a very important role for your molding process and Tan Star are always dedicate to research and develop for new solution to all coming challenges around the world.
Rotary Table Low Pressure Molding Machine
Categories : Horizontal Injection Molding Machines
Low pressure molding production is a process uses hot liquidify Polyamide material. Wire harnesses, connectors, sensors, micro switches, etc. These Automotive Electronics need to be waterproof and durable. rapid production, environmental protection, reduce the defect rates and better outlook design, the application of low-pressure injection machines in this automotive industry has gradually increased.
Manual Feeding Transfer Injection Molding Machine
Categories : Rubber Injection Molding Machines
Features Injection volume control High precision optical ruler is adopted for precisely calculating and controlling. Design of rotary injection board Special designs for loading/unloading functions are provided. It causes no dead material in the injection nozzle. It is easy to clean the material. It is durable and the quality is stable.
Toggle Outward Injection Molding Machine E Series
Categories : Horizontal Injection Molding Machines
Plastic (toggle outward) injection molding machines are the particular design of toggle mechanism. They allow the application of the dynamic force concentrated on the centre of the moving platen, eliminating deflection and distributing the clamping force evenly over the entire mould surface.
E Series Servo-electric Injection Molding Machine
Categories : Electrical Injection Molding Machines
The "E-series" had created excellent performance, due to the best application of servo motor.
3RT Mold-Open Rubber Injection Molding Machine IRH-S3
Categories : Rain boot Injection Molding Machines
Mold opening design The 3RT surpasses the traditional top opening mold that can be used for the triple or four molds with the design of the opening mold and pushing out the mold in the between. The opening mold can be adjusted by the software with separate opening, separate pushing out the mold in between, continuous opening and continuous pushing out the mold in between. Injection volume control High precision optical ruler is adopted for precisely calculating and controlling. Design of rotary injection board Special designs for loading/unloading functions are provided. It causes no dead material in the injection nozzle. It is easy to clean the material. It is durable and the quality is stable. Safety design A high-tech infrared safety electronic sensor and automatic warning system are adopted to monitors the status of machine in order to provide extra protection to ensure the operation safety for operators. Hydraulic system Design Hydraulic system Designed by proportional pressure and flow ratio, which is steady, quiet and low frequency of malfunction. Two shafts can be operated simultaneously.
2RT Mold-Open None Runner-Waste Rubber Injection Molding Machine
Categories : Rain boot Injection Molding Machines
2RT Mold-Open None Runner-Waste Rubber Injection Molding Machine Nature rubber Rubber of metal boned parts Oil resistance rubber NBR+PVC concoction Synthetic rubber Medical/Pharmaceutical usage rubber Heat resistance rubber
PET Preform Injection Molding Machine Servo - 120PET to Servo 470PET
Categories : Horizontal Injection Molding Machines
Standard L/D ratio of 24 times and above for good plasticizing quality. Application of barrier type screw features and an extra barrier ridge to ensure homogenous plasticization when melting PET. Because of the viscosity of the PET, the screw speed and capacity of the hydraulic motor is upgraded to achieve higher plasticization. Compatible with auxiliaries such as PET preform molds, material dryer, mold sweat dehumidifier, water chiller, conveyor and post-cooling automation. Optional features such as a shut-off nozzle or an ejector on the fly are available. These are for shortening the total cycle time and maximizing the output.
Injection Mold for Plastic Rattan furniture Mold Maker
Categories : Injection Molds
Mold size: 990W x 1290L x 950H mm Mold weight: 6800kg Injection machine: 1000TON
Delicacy-Perfection V Series Injection Molding Machine
Categories : Automatic Injection Molding Machine
Occupy minimum space, exquisite and nimble, it can reduce cost and promote the product quality. Adopt slider design, easy operation, it is suitable for inserting molding. Adopt “light curtain” safety system to promote the operator safety.
PVC Injection Molding Machine 90PVC to 320PVC
Categories : Horizontal Injection Molding Machines
Common commissioning for molding products such as fittings of a highly acid chemical. A one-piece rod and a standard L/D ratio screw design makes melt flow smoothly. Includes a standard, grade B, bimetallic screw barrel to provide a better wear-resistance and lifespan. Radiation fans set on top of the sleeve of the barrel to avoid overheating issues of the rigid PVC inside of the barrel.