Search - screen changer

FILM/BAGS WASTE PLASTIC RECYCLING MACHINE : KCR-150

Categories : Recycling Lines by Application

The KCR-150 is a film/bag waste plastic recycling machine for HDPE, LDPE, and LLDPE film or bags, crushing and reprocessing the waste into pellets at an output of 300-400 kgs / hr.Waste is crushed by a 50 HP crusher, moved via a 2 HP screw conveyor into a 5" feed size, then collected in a 1400 L waste tank before entering a single-degasification Ø 150 mm screw (L/D ratio 30:1) heated at 141 kw across 8 zones and driven by an AC 125 hp inverter motor. The melt is extruded through a circular-shape die with a hydraulic-cylinder screen changer, cooled by a water-cooling system with a 2 HP pump, dehydrated by a 5 HP motor, and pelletized by a 2 pcs (spring) pelletizer.Model: KCR-150Suitable material: HDPE/LDPE/LLDPEOutput: 300-400 kgs / hrCrusher: 50 HPScrew diameter: Ø 150 mm, L/D ratio 30:1Heating capacity: 141 kw, 8 zoneDriving motor: AC 125 hp + InverterDie type: Circular Shape Extrusion DieWaste collecting tank: 1400 L

Manual Screen Changer

Categories : Separating & Filtration Equipment

Screen Changer-PSG

Categories : Filtration & Screen Changers

The PSG series hydraulic screen changer was developed by Sino-Alloy Machinery as an important accessory for filtering out contaminants. Suitable for filtering out impurities and the amount of filtration can be determined by using different mesh sizes to meet high quality filter requirements. The PSG screen changer uses a manually operated hydraulic actuator to move the dual-cavity piston, allowing for changes within a few seconds. Additionally, it has a simple compact design for ease of use and cleaning.

HDPE High Speed Inflation Machine (GF-H45)

Categories : Blown Film Extruders

The GF-H45 is a high-speed blown film line for HDPE (high density polyethylene), the material used for thin, crisp bags such as grocery and produce bags. It is one of five sizes in the GF-H series, which spans the GF-H35 to the GF-H65, and is specified for a maximum film width of 600 mm. The extruder carries a 45 mm screw with a 20 HP inverter-controlled motor, and the 70 mm die is matched with a dual-lip air ring and a 3HP inverter-controlled blower. Output is rated at 40 KG/HR. The take-up tower is a fixed type with a 700 mm roller width, and winding is on a single-station manual surface winder controlled from an independent switch board. Options cover an auto loader, manual screen changer, pressure gauge, die rotating unit, LDPE dies and air ring, corona treater, embossing unit, second-station winder and air shaft. Material: HDPE Max. film width: 600 mm Extruder: 45 mm screw, 20 HP motor with inverter Die: 70 mm with dual-lip air ring; blower 3HP with inverter Max. capacity: 40 KG/HR Take-up: tower fixed type, 700 mm roller width; single-station manual surface winder Options: auto loader, manual screen changer, die rotating unit, LDPE dies/air ring, corona treater, embossing unit, 2nd station winder

Triple Manifold CPP Film Co Extrusion Line

Categories : Co-Extrusion Blown Film Machines

The MGB-CPP-1800-2LF is a triple manifold CPP film co-extrusion line built on a two-layer-stand design that saves space and cost, with a twin-screw configuration enabling dual production. The control system uses a movable human touch interface with digital communication monitoring of screw rotational speed, die head temperature, pressure, thermo air knife, and vacuum box, plus remote monitoring and recipe management.Temperature control uses an SCR system holding a tolerance of ±1°C to precisely control plasticizing, sheet thickness, flatness, and foaming proportion. The screw incorporates a static mixer and gear pump to accurately control extruding output, pressure, and time for homogeneous color, while a non-stop screen changer unit keeps production running during screen changes. A BAB three-layer auto die head with thickness measurement auto-adjusts film thickness for different materials, and in-line trimming, slitting, and crushing units recycle waste immediately.Model: MGB-CPP-1800-2LFLayers distribution: ABAThickness: 0.03 - 0.2 mmOutput: 250 - 450 kg/hrMachine dimension: 16,000 (L) x 7,500 (W) x 6,000 (H) mmOptional equipment: 20TON Chiller (1), Embossing roller (1)

PE Stretch Casting Film Extrusion Machine

Categories : Film and Sheet Extrusion Lines

T-Die Extruder machine can produce waterproof PE film for baby diaper, sanitary napkin, folders, table cloths, medical film, etc. Film thickness 0.03~1 mm Equipped with a fully automatic winder with cutting and changing rolls functions Hydraulic screen changer for short maintenance stop We didn’t show all our models, please don’t hesitate to contact us for bigger extruders.

PVA Water Soluble Blown Film Machine - GF-AV35.45

Categories : Blown Film Extruders

The GF-AV35.45 listing covers JANDI'S PVA water soluble blown film machines in two extruder sizes, which differ in extruder diameter and maximum film width. Both process PVA based water soluble, compostable and biodegradable compounds into tubular film for water soluble bags and packaging. Each machine is supplied with an extruder, a blown film die, an air ring, a take-up tower and a winder. Options are an auto loader, manual screen changer, pressure gauge, die rotating unit, corona treater, flying knife, second station winder, air shaft and air chiller. The showroom specification table lists the film width and extruder size of each model; details are available with quotation and specifications can be changed on request. Type: PVA water soluble blown film machine, GF-AV35.45 listing Models: two extruder sizes, listed in the specification table Material: PVA based water soluble, compostable and biodegradable compounds Extruder, blown film die, air ring, take-up tower and winder Options: auto loader, manual screen changer, pressure gauge, die rotating unit Options: corona treater, flying knife, second station winder, air shaft, air chiller Film width and extruder size per model in the specification table

PLA/ PBAT Blown Film Machine

Categories : Blown Film Extruders

The PLA/PBAT Blown Film Machine (GF-LB Series) is a blown film line configured for compostable and biodegradable resins based on PLA and PBAT. It produces tubular film from these compounds for downstream bag making, in the same way that JANDI'S GF-L series does for conventional polyethylene, and is listed in the showroom specification table as the GF-LB Series with film width and extruder size selected per model. The line is built from an extruder, a blown film die, an air ring, a take-up tower and a winder. Options include an auto loader, manual screen changer, pressure gauge, die rotating unit, corona treater, flying knife, second station winder, air shaft and air chiller. Film width, output and configuration are confirmed with the buyer at quotation; the specification table below lists the series range. Type: single-layer blown film machine, GF-LB Series Material: PLA/PBAT based compostable and biodegradable compounds Extruder, blown film die, air ring, take-up tower and winder Options: auto loader, manual screen changer, pressure gauge, die rotating unit Options: corona treater, flying knife, second station winder, air shaft, air chiller Film width and extruder size per model, confirmed at quotation

LD/LLDPE High Speed Inflation Machine (GF-L55)

Categories : Blown Film Extruders

The GF-L55 is a single-layer blown film line for LD and LLDPE (low density and linear low density polyethylene). It sits in the middle of the GF-L series, which runs from the GF-L35 up to the GF-L65, and is configured for producing polyethylene film for bags and packaging at a maximum film width of 1000 mm. The extruder uses a 55 mm screw driven by a 40 HP motor with inverter control, feeding a 200 mm die fitted with a dual-lip air ring. Rated output is 90 KG/HR. The line is controlled from an independent switch board, and film is taken up on a 1100 mm roller width and wound on a single-station manual surface winder. Options include an auto loader, manual screen changer, pressure gauge, die rotating unit, corona treater, HDPE dies and air ring, flying knife, second-station winder, air shaft and air chiller, so the same base machine can be specified for HDPE or for downstream printing. Material: LD/LLDPE Max. film width: 1000 mm Extruder: 55 mm screw, 40 HP motor with inverter Die: 200 mm with dual-lip air ring Max. capacity: 90 KG/HR Roller width: 1100 mm; single-station manual surface winder Options: auto loader, manual screen changer, die rotating unit, corona treater, HDPE dies/air ring, 2nd station winder, air chiller

High-Speed Dyeing & Pelletizing Production Line

Categories : Pelletizing & Compounding Lines

Suitable for masterbatch with fiber pelletizing, HDPE, LLDPE, LDPE, PP, PMMA, ABS, PC, Nylon, etc. Special screw design for compounding Changing material is easy Easy to operate Machine frame is very strong Customized screen changer

Die Face Cutting Type Recycling Machine(GHR Series)

Categories : Recycling Lines by Application

The GHR series is a die face cutting type plastic film recycling machine for HD, LD and LLDPE and P.P. film scrap, producing pellets that can go back into the extruder. Scrap is fed into a stainless steel densifying tank with rotary cutters, then extruded through a hydraulic screen changer and cut at the die face; the pellets are dried in a stainless steel centrifuge unit and collected in a stainless steel storage unit. The series covers extruder sizes of 65 mm, 85 mm, 100 mm and 120 mm.Motors with inverter are 50 HP, 75 HP, 100 HP and 125 HP across the four sizes, for maximum capacities of 120 KG/HR, 200 KG/HR, 300 KG/HR and 400 KG/HR. Options include a conveyor with metal detector, crusher, screw conveyor, vacuum pump, pressure gauge, second extruder, film roll feeder and vibrating screen. JANDI'S notes that adding a crusher makes it easier to handle scrap of different sizes such as loose film and die-cut waste, gives a more even temperature in the densifying stage, and results in more stable feeding, more stable extrusion output and more uniform pellet sizes.Type: die face cutting type plastic film recycling machineMaterial: HD/LD/LLDPE & P.P.Models: GHR65E, GHR-85E, GHR-100E, GHR-120E; extruder 65 mm, 85 mm, 100 mm, 120 mmMotor with inverter: 50 HP, 75 HP, 100 HP, 125 HPMax. capacity: 120 KG/HR, 200 KG/HR, 300 KG/HR, 400 KG/HRDensifying tank with rotary cutters, hydraulic screen changer, centrifuge drying unit and storage unit in stainless steelOptions: conveyor with metal detector, crusher, screw conveyor, vacuum pump, 2nd extruder, film roll feeder, vibrating screen

FILM/BAGS WASTE PLASTIC RECYCLING MACHINE : KCR-100

Categories : Recycling Lines by Application

The KCR-100 is a film/bag waste plastic recycling machine for HDPE, LDPE, and LLDPE film or bags, crushing and reprocessing the waste into pellets at an output of 80-200 kgs / hr.Waste is crushed by a 15 HP crusher, moved via a 2 HP screw conveyor into a 5" feed size, then collected in a 1400 L waste tank before entering a single-degasification Ø 100 mm screw (L/D ratio 30:1) heated at 71.7 kw across 6 zones and driven by an AC 60 hp inverter motor. The melt is extruded through a circular-shape die with a hydraulic-cylinder screen changer, cooled by a water-cooling system with 2 HP x 2 pumps, dehydrated by a 5 HP motor, and pelletized by a 2 pcs (spring) pelletizer.Model: KCR-100Suitable material: HDPE/LDPE/LLDPEOutput: 80-200 kgs / hrCrusher: 15 HPScrew diameter: Ø 100 mm, L/D ratio 30:1Heating capacity: 71.7 kw, 6 zoneDriving motor: AC 60 hp + InverterDie type: Circular Shape Extrusion DieWaste collecting tank: 1400 L