English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
LD/LLDPE High Speed Inflation Machine (GF-L55)
Categories : Blown Film Extruders
The GF-L55 is a single-layer blown film line for LD and LLDPE (low density and linear low density polyethylene). It sits in the middle of the GF-L series, which runs from the GF-L35 up to the GF-L65, and is configured for producing polyethylene film for bags and packaging at a maximum film width of 1000 mm. The extruder uses a 55 mm screw driven by a 40 HP motor with inverter control, feeding a 200 mm die fitted with a dual-lip air ring.Rated output is 90 KG/HR. The line is controlled from an independent switch board, and film is taken up on a 1100 mm roller width and wound on a single-station manual surface winder. Options include an auto loader, manual screen changer, pressure gauge, die rotating unit, corona treater, HDPE dies and air ring, flying knife, second-station winder, air shaft and air chiller, so the same base machine can be specified for HDPE or for downstream printing.Material: LD/LLDPEMax. film width: 1000 mmExtruder: 55 mm screw, 40 HP motor with inverterDie: 200 mm with dual-lip air ringMax. capacity: 90 KG/HRRoller width: 1100 mm; single-station manual surface winderOptions: auto loader, manual screen changer, die rotating unit, corona treater, HDPE dies/air ring, 2nd station winder, air chiller
3 Layer Co-Extrusion Inflation Machine (GF-L3C-MT)
Categories : Blown Film Extruders
The GF-L3C-MT is an A-B-C three-layer co-extrusion blown film line. Three extruders feed a co-extrusion die so that the inner, middle and outer layers of the film can be built from different resins, which is how a single film gains properties such as strength from one layer and sealability or surface finish from another. JANDI'S specifies the line for LDPE, LLDPE, mLLDPE, HDPE, EVA and PP.The MT configuration is built for wide flat film and gusseted film, with the film width and gusset width stated in the specification table below. Line configuration, film thickness range and downstream equipment are specified with the buyer at quotation, so the MT should be treated as a platform that JANDI'S tailors to the bag or packaging film the customer produces rather than a fixed catalog item.Type: A-B-C 3 layer co-extrusion blown film lineMaterials: LDPE / LLDPE / mLLDPE / HDPE / EVA / PPModel: GF-L3C-MTFilm width and gusset width: see specification tableDownstream configuration specified at quotation
HDPE High Speed Inflation Machine (GF-H45)
Categories : Blown Film Extruders
The GF-H45 is a high-speed blown film line for HDPE (high density polyethylene), the material used for thin, crisp bags such as grocery and produce bags. It is one of five sizes in the GF-H series, which spans the GF-H35 to the GF-H65, and is specified for a maximum film width of 600 mm. The extruder carries a 45 mm screw with a 20 HP inverter-controlled motor, and the 70 mm die is matched with a dual-lip air ring and a 3HP inverter-controlled blower.Output is rated at 40 KG/HR. The take-up tower is a fixed type with a 700 mm roller width, and winding is on a single-station manual surface winder controlled from an independent switch board. Options cover an auto loader, manual screen changer, pressure gauge, die rotating unit, LDPE dies and air ring, corona treater, embossing unit, second-station winder and air shaft.Material: HDPEMax. film width: 600 mmExtruder: 45 mm screw, 20 HP motor with inverterDie: 70 mm with dual-lip air ring; blower 3HP with inverterMax. capacity: 40 KG/HRTake-up: tower fixed type, 700 mm roller width; single-station manual surface winderOptions: auto loader, manual screen changer, die rotating unit, LDPE dies/air ring, corona treater, embossing unit, 2nd station winder
PVA Water Soluble Blown Film Machine - GF-AV35.45
Categories : Blown Film Extruders
The GF-AV35.45 listing covers JANDI'S PVA water soluble blown film machines in two extruder sizes, which differ in extruder diameter and maximum film width. Both process PVA based water soluble, compostable and biodegradable compounds into tubular film for water soluble bags and packaging.Each machine is supplied with an extruder, a blown film die, an air ring, a take-up tower and a winder. Options are an auto loader, manual screen changer, pressure gauge, die rotating unit, corona treater, flying knife, second station winder, air shaft and air chiller. The showroom specification table lists the film width and extruder size of each model; details are available with quotation and specifications can be changed on request.Type: PVA water soluble blown film machine, GF-AV35.45 listingModels: two extruder sizes, listed in the specification tableMaterial: PVA based water soluble, compostable and biodegradable compoundsExtruder, blown film die, air ring, take-up tower and winderOptions: auto loader, manual screen changer, pressure gauge, die rotating unitOptions: corona treater, flying knife, second station winder, air shaft, air chillerFilm width and extruder size per model in the specification table
3 Layers High Speed Inflation Machine (GF-ABA-55-50)
Categories : Blown Film Extruders
The GF-ABA-55-50 is a 3-layer high speed inflation machine with an A-B-A structure: the two outer layers are fed from one extruder and the core layer from a second, so that a 3-layer film is produced with two extruders rather than the three used in JANDI'S A-B-C lines (GF-E3C and GF-L3C series). The listing sits in the showroom alongside the biodegradable PLA/PBAT blown film machines.The A-B-A arrangement is used where the two skin layers share the same recipe and the core carries a different compound. The die, air ring, take-up tower and winder are configured with the buyer at quotation, together with film width, thickness range and output; suitability for biodegradable compounds is confirmed at the same stage.Type: 3-layer high speed inflation machine, A-B-A structureModel: GF-ABA-55-50Two extruders: one feeding both outer layers, one feeding the coreBlown film die, air ring, take-up tower and winderFilm width, thickness range and output confirmed at quotationSuitability for PLA/PBAT compounds confirmed at quotation
Knife-Cutting Bag Making Machine (GF-A812E-SV+C)
Categories : Cutting Machines
The GF-A812E-SV+C is a servo-driven knife-cutting bag making machine for bottom sealing bags. In the single-deck GF-A812E/SV configuration it makes 2 x 400 mm W bags or 1 x 800 mm W bags with a cutting width of 850 mm and a cutting length of 1200 mm, on film from 0.01 - 0.1 mm thick. The rear feeder is controlled by feeding sensors, sealing is a single sealing line with one sealing knife, and cutting is by a separate cutting knife.The machine is controlled through an HMI panel with a YASKAWA servo drive from Japan, and automatic stacking is standard. The same series extends to double-deck, triple-deck and 4-deck models — for example the GF-A824E/SV, GF-A836E/SV and GF-A848E/SV — for higher output from one footprint, with special designs available upon request. Options include a hole punch device, printing scanner and automatic punch unit.Type: knife-cutting bag making machine, bottom sealing bagSingle-deck model GF-A812E/SV: 2 x 400 mm W or 1 x 800 mm WCutting width: 850 mm; cutting length: 1200 mmFilm thickness: 0.01 - 0.1 mmRear feeder controlled by feeding sensors; 1 sealing knife, single sealing line; 1 cutting knifeControl: HMI; servo drive YASKAWA / JAPAN; automatic stackingMulti-deck versions: double, triple and 4-deck models; options: hole punch device, printing scanner, auto punch unit
Side Sealing Bag Making Machine (GF-32SE/SV)
Categories : Plastic Bag Making Machines
The GF-32SE/SV is a servo-driven side sealing bag making machine, the machine type used for clear packaging bags, garment bags and similar side-sealed formats. Within the series — GF-24SE/SV, GF-32SE/SV, GF-40SE/SV and GF-50SE/SV, with matching GF-S600/SV to GF-S1200/SV models — the GF-32SE/SV has a cutting width of 800 mm and a cutting length of 800 mm, on film from 0.01 - 0.1 mm. Production is Max. 200 Cycles/Min for the SE model and Max. 150 Cycles/Min for the S model.The rear feeder is supplied with gusset, fold, slitter and adhesive tape applicator functions, the control panel uses an HMI, and the servo drive is YASKAWA/JAPAN with a SICK/GERMANY printing scanner. A conveying belt and collecting table are included. Options extend the machine to tension control, EPC, a triangle folding device, punch hole and Mexican hat punch devices, ultrasonic sealing, a perforating sealing knife, an envelope punching mold and an automatic stacking table.Type: side sealing bag making machine, servo driveSeries: GF-24SE/SV, GF-32SE/SV, GF-40SE/SV, GF-50SE/SV (GF-S600/SV to GF-S1200/SV)Cutting width: 800 mm; cutting length: 800 mmFilm thickness: 0.01 - 0.1 mmProduction: SE model Max. 200 Cycles/Min; S model Max. 150 Cycles/MinRear feeder with gusset / fold / slitter / adhesive tape applicator; HMI control; servo YASKAWA/JAPAN; printing scanner SICK/GERMANYOptions: tension control, EPC, triangle folding, punch hole, Mexican hat punch, ultrasonic sealing, perforating sealing knife, envelope punching mold, automatic stacking table
Tiny Inflation Machine (TINY-28)
Categories : Blown Film Extruders
The TINY-28 is a laboratory-scale blown film machine for HD, LD and LLDPE resin, intended for lab use and color testing and for producing small, thin film samples. It is the middle size of three, between the TINY-25 and the GF-HMM28. The extruder uses a 28 mm screw feeding a 40 mm blown film die, and temperature is controlled in 3 ZONES.Maximum film width is 200 mm at a maximum extrusion output of 8 KG/HR. The take-up unit has a 300 mm roller width and the single-station surface friction winder has an effective width of 200 mm. Because the machine is used for resin and masterbatch trials rather than production, JANDI'S notes that specifications can be changed to the customer's requirements.Application: lab use, color testing, small and thin filmMaterial: HD/LD/LLDPE resinMax. film width: 200 mmMax. extrusion output: 8 KG/HRExtruder: 28 mm screw; 40 mm blown film die; 3 ZONES temperature controlTake-up roller width 300 mm; winder effective width 200 mm
JIT Shopping Bag Making Line (JIT Series)
Categories : Bag Making Machine by Applications
The JIT Series is JANDI'S in-line shopping bag making line. Blown film extrusion, printing and bag making run as one continuous process, so resin enters at one end and finished, printed shopping bags leave at the other; there are no intermediate film rolls to store, transport or re-load. This listing covers the series as a whole, which is offered in mono-layer semi-automatic and full-automatic types, an ABA full-automatic type and a two-colour full-automatic type.Because the steps are linked, JANDI'S describes the line by what it removes from a conventional three-machine set-up: separate handling between extrusion, printing and bag making, the floor space and storage for film rolls, and the die-cut scrap, which is recovered on-line and fed back. Line composition, printing configuration, bag size and output are configured with the buyer at quotation.Type: in-line shopping bag making line, JIT SeriesProcess: blown film extrusion, printing and bag making in one lineConfigurations: mono-layer semi-auto, mono-layer full-auto, ABA full-auto, two-colour full-autoSingle-side printing configuration, colour count confirmed at quotationDie-cut scrap recovered on-lineNo intermediate film roll storage between stepsLine composition, bag size and output configured at quotation
Clam-Shell Design Co-Rotating Twin Screw Extruder-PSM20A
Categories : Pelletizing & Compounding Lines
The PSM20A Co-Rotating Twin Screw Extruder has an ultra compact design and is easy to operate. It is designed for optimal double flight screw elements, which maintains the same deep groove, high torque characteristics of our larger full-production models. This compatibility allows for a direct transfer of experimental process parameters to the full production model without conversion factoring. All PSM series extruders meet or exceed CE and international safety standards. Sino-Alloy can also design a custom line to meet your specifications.
Compact Co-Rotating Twin Screw Extruder-PSM30A
Categories : Twin Screw Extruders
The PSM30A Co-Rotating Twin Screw Extruder has an ultra compact design and is easy to operate. It is designed for optimal double flight screw elements, which maintains the same deep groove, high torque characteristics of our larger full-production models. This compatibility allows for a direct transfer of experimental process parameters to the full production model without conversion factoring. All PSM30 series extruders meet or exceed CE and international safety standards. Sino-Alloy can also design a custom line to meet your specifications.
Co-Rotating Twin Screw Extruders-PSM72A
Categories : Twin Screw Extruders
The optimization of the PSM72 series resulted in more efficient and durable designs. The PSM72 series has mid range production capabilities, and easy operation in reasonable price. All PSM72 series extruders meet or exceed CE and international safety standards. Sino-Alloy can also design a custom line to meet your specifications.