English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
Intensive Mixer
Categories : Rubber Mixing & Pre-Processing Equipment
Compounding For Rubber、Plastic & Chemical Industries Features: 1.Rotors: Two wings design with good cooling design. Excellent cooling ability. Anti-wearing treatment on the surface. 2.Chamber: Drill hole type jacket. Excellent cooling ability. Material contact surface: Hard chrome plating and fine polish. 3.Discharge door: Excellent sealing. No material leakage. 4.Ram: Drive by air cylinder. Good mixing and dispersion quality.
Rubber / Plastic Mixer Machine
Categories : Rubber Mixing & Pre-Processing Equipment
This Intensive Mixer is designed for mixing compounds and specific plastic. The structure of the machine consists of the main air cylinder, floating weight, feeding door, mixing chamber, rotors and discharge device. When performing mixing compound operations, the material and ingredients are fed together into the mixing chamber. The material in the mixing chamber is repeatedly sheared and squeezed by the rotors. This provides a series of chemical rotations between the material and the ingredients, which enables the material pieces to stick together into a paste mass shape. Mixing compound operations are performed according to the set temperature and conditions. This specially designed mixing machine provides efficient mixing and refining for a wide range of raw materials, such as raw rubber, resins, asphalt, cellulose, PVC ane EVA…etc.
Hydraulic Type Die Cutting Machine With Sliding Table Feeding
Categories : Cutting Machines
Application：Special design for die cutting one layer or several layers of such material as rubber sheet, leather, plastic, foam, nylon, paper board and synthetic material. Four column of hydraulic cylinder, average cutting force. Microcomputer controller for maximum operation convenience. High speed sliding table feeding, motion is fast and safe. Safety sensor is equipped in front of cutter, (when sensor is touched, the machine automatically stops the action).
Hydraulic Automatic Feed Die Cutting Machine (Four Column Press)
Categories : Cutting Machines
Application：Suitable for cutting one layer or several layer of such material as rubber sheet (bottom sole, medium sole), EVA, leather, plastic canvas, vacuum foaming products, nylons, carpet, mat, corks, soft tiles, paper boards and synthetic materials. yicheen The improved and upgraded traditional punching machines. Adopt four column of Hydraulic cylinder, average cutting force, high efficiency to raise the productivity. The upper die install by Magnetic platen, it is very convenient to change die. Microcomputer controller with touch sensing screen for maximum operation convenience and accuracy. Also, optional equipped with LCD screen computer control system is available, which it can memory operation program, provide the most convenient in operation and accurate cutting operation. Lubricated system design on Main shaft to avoid machine parts damage in movement and enhance machine lifetime. The Safety device (opening safe net for emergency stop motion) ensures the operator safety. Options: Air shaft unwind device, Air shaft rewind device
Hot Plate Plastic Welding Machine KH-33 (upper and lower cylinder type)
Categories : Welding & Surface Treatment Equipment
1.The machine is constructed of main body, hot mold set and upper & lower fixtures. Upper and lower fixtures moved by cylinder. 2.The welding part's surfaces melted in proper welding time when pressed against the hot plate. 3.The hotplate retracts and forced welding parts together in proper holding time. 4.Enable to weld two mold cavities in one stroke.
Hot Plate Plastic Welding Machine KH-31
Categories : Welding & Surface Treatment Equipment
The machine is constructed of main body, hot mold set and upper & lower fixtures. Only upper fixtures declined by cylinder. The welding part's surfaces melted in proper welding time when pressed against the hot plate The hotplate retracts and forced welding parts together in proper holding time Enable to weld two mold cavities in one stroke
CPV Cylinder Pinch Valve
Product Serial: CPV Cylinder pinch valve are used in biopharmaceutical processing, food and beverage, and industrial applications requiring aseptic process. These compact valves provide reliability and high performance, especially when working with harder or larger outer diameter tubing and require stronger clamping forces. Designed for disposable tubing, each model includes a convenient installation slot for quick loading and unloading. It can be set to normally open or normally closed with an external solenoid valve. Cylinder pinch valve is also known as pneumatic pinch valve, as it requires external pneumatic supply to support its function. It is commonly used to open or close a fluid path through pinching and squeezing the plastic flexible tube. There is also an option with proportionally controlling the distance in which the tube is squeezed which indirectly controls the flow rate. The advantage of using a pinch valve is that it has no contact with the fluid, making it an ideal option for biotechnology processing, food industry, dosing system, blood process/analytical, CIP and SIP process, and biopharmaceutical equipment. Pneumatic pinch valve relies on the amount of external pneumatic pressure supplied to pinch the tube, and thus it provides a higher pinch force, making it suitable for tube with larger durometer or large outer diameter.
Bottom Seal Bag Making Machine + Bag Folding System
Categories : Plastic Bag Making Machines
Automatic Folding system - Servo-controlled 1st & 2nd fold individually (piece by piece), 3rd fold by pneumatic cylinder every 1-15 pieces pile. 4th & 5th folds by optional. Cold-cut system - For thin film material. Machine uses upper heating knife and silicon roller base for sealing. Cutting knife before bag outfeeding.
Back-up Ring
Categories : Industrial Parts & Safety Gear
A Back-up Ring is an essential sealing component designed to be used in conjunction with O-rings to prevent seal extrusion and premature failure in high-pressure, high-temperature, or large-clearance applications. By providing firm structural support to the O-ring, the back-up ring effectively blocks extrusion gaps, ensuring sealing stability, extended service life, and reliable performance under demanding operating conditions. Back-up rings are widely used in hydraulic and pneumatic systems, where pressure spikes and dynamic motion can compromise standard elastomer seals. Available in materials such as PTFE (Teflon) and Nylon, they offer excellent resistance to pressure, wear, and chemical attack, making them ideal for industrial, oil & gas, and heavy-duty engineering applications.
Aluminum Foil Printing Machine(WAP Series)
Categories : Rotogravure Printing Machines
In order to meet the special requirement of aluminum foil printing, the quality and R&D oriented manufacturer-- Worldly Industrial Co., Ltd., has developed the best solution for this special printing accordingly-WAP series. Considering the diverse needs of product printing, Worldly has designed the six-color printing station in printing structure, and combined a coating machine in the terminal. This coating machine has the outstanding capacity to lacquer over aluminum foil after printing to Improve printing effect, and it is also equipped with spine glue function for many different printing requirements. Also, adopts special reverse structure for aluminum foil between each color printing station, and sets up doctor blade units on both sides to enable reverse printing in any color. Easily fulfills various requirements in printing. Besides of that, adopts "Sumimoto" sectional motor system in every printing station; therefore, saving operation time and improve effect/respond time of color register during printing cylinder replacement. This machine also equips a drying tunnel system on the top of it. It is a four-sectional drying tunnel which makes drying more efficiently. Unwinding and Rewinding units are splicing materials in double shaft automatically turret type. And it is non- stop the machine when changing materials, very simple and convenient. All machine is link-controlled by High-efficiency PLC logic controller and HMI touch interface, so the controlling effect is very precise and high efficient. In addition to that, this machine also equips with automatic color register function which makes printing quality beyond perfection. As for Q.C, Worldly selects VIDEO monitoring system to achieve real-time Q.C inspection. It effectively assists printing work and improves quality Even if in high speed printing operation.
Air Cooling Type Recycling & Pelleting Machine
Categories : Recycled Plastic Pelletizing Lines
The MGB-RP-120 is Ming Jilee's air cooling type recycling and pelleting machine, reprocessing HDPE, LDPE, and LLDPE waste film back into resin pellets. Waste material can be fed directly into the inlet without pre-crushing in a separate crusher, since the machine's construction smashes and pellets the material in one step.Operation is straightforward: each heater's temperature is preset in advance, and once all temperature gauges reach the set point, the operator waits roughly 20 - 30 minutes before starting. A hydraulic screen exchanging device allows quick screen changes, a vision window on the barrel lets the operator observe pelleting in progress, granule size is adjusted via the inverter, and an IN-FEED pneumatic pressing cylinder supports production capacity. Output reaches 50 - 60 kg/hr for LDPE/LLDPE and 40 - 50 kg/hr for HDPE.Model: MGB-RP-120Applicable resin: LDPE / LLDPE / HDPE Waste FilmOutput (LDPE/LLDPE): 50 - 60 kg/hrOutput (HDPE): 40 - 50 kg/hrMachine dimension: 2,925 (L) × 2,800 (W) × 2,035 (H) mmMachine weight: 2,900 KgRequired power: 38 kw
Air Bubble / EPE Coreless Rewinding Machine
Categories : Slitters and Rewinders
The MGR-MINIROLL-1600 is Ming Jilee's coreless rewinding machine, purpose-built for rewinding air bubble film (bubble Ø 10 mm) and EPE foam (thickness 1 - 5 mm). It uses an integrated heat needle sealing system in place of traditional tape sealing, plus a cantilever shaft design for quick loading of the mother roll.A proximity switch control automatically stops the machine in case of malfunction, and a fully motorized nip roll cylinder with a built-in pneumatic cutting mechanism keeps material feeding stable and cutting precise. An optional tape dispenser is available for sealing finished rolls. Width of production reaches Max. 1,600 mm, with rewinding dia of 80 - 300 mm and roll length of 3 - 30 meter.Model: MGR-MINIROLL-1600Feed Material: Air bubble film bubble Ø10 mm; PE foam 1 - 5 mmWidth of Production: Max. 1,600 mmLength of the Produce Rolls: 3 - 30 meterRewinding dia: 80 - 300 mm (with air bubble film 2 layers Ø 10 mm)Production Speed: 5 m roll 140 - 180 rolls/hour; 10 m roll 120 - 180 rolls/hourMachine Weight: 1,600 kgPower Consumption: 10 kw