English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
Aluminum Foil Coating & Laminating Machine (WACL Series)
Categories : Extrusion Coating Machines
WACL series is not just a convention dry laminating machine. The cold form foil is very much concerned proper & precise tension control to handle such thick laminates. In terms of tension control, this machine has mainly designed for Alu-alu foil multi-layers lamination. The arch dryer roller has synchronized with line speed, it’s very low friction and steady when film pass through the dryer. The internal drying chamber has safety LEL detection, this system can automatically discharge when detected high VOC occur during the production. This machine also combined heat seal lacquering coating function. Additional primer coating unit before lacquering unit, so it allows to apply two side (primer+heat seal) coating in one pass. The coating unit has alternative function with direct gravure and semi-flexo coating systems. Coating trolley along with self-pump system and able for quick job change.
Corona Treater - Blown Film TE-A Series
Categories : Welding & Surface Treatment Equipment
FOR HIGH SPEED 3 LAYER INFLATION LDPE/HDPE/PP/EVA/NYLON 2KW~10KW 600~2000MM 2 SIDE TREATMENT STAINLESS STEEL 2mm SEGMENT BAR
Fully Automatic Bottom-Sealed Loop Handle Bag Making Machine With 3 Servo Motors LY-800BL
Categories : Plastic Bag Making Machines
Introduction LY-800BL is a fully automatic bottom-sealing type soft-loop bag making machine. It adopts 3 sets of servo motors for film feeding, cutting and bag conveying to allow smooth and stable production. Features Fully automatic bottom-sealing, side-gusset soft-loop bag making machine. Servo-driven feeding system with one set of photocell for printed bag. Servo-driven flying knife system for cutting. Servo-driven conveyor system for soft-loop unit. Optional post gusseter is available.
Sandwich Extrusion Lamination Machine (YSL-U)
Categories : Extrusion Lamination Machines
This series of machines are available for cement bag, compound materials, sandwich lamination process…etc.
BJABP+AS3-Triple-Lane Fully Automatic Servo-Control High Speed T-Shirt Bag Machine
Categories : Plastic Bag Making Machines
Heat/Cold Cutting with Heat sealing
2 COLORS FLEXO PRINTING MACHINE (STANDARD TYPE)
Categories : Flexographic Printing Machines
These flexographic printers are able to print in two colors with the following possibility: 0+2, 1+1 Max. printing speed 60-70 mts/min Standard printing length is max. 1200mm, bigger printing length can be requested as your demand We didn’t show all our models, please don’t hesitate to contact us for bigger printing machines.
Servo Motor Driven Double Layer T-Shirt Bag & Bottom Bag Making Machine
Categories : Plastic Bag Making Machines
Double Layer Bottom Sealing
4-LINE / 6 LINE PLASTIC SHOPPING BAG MAKING MACHINE
Categories : Plastic Bag Making Machines
Double cutters for making bottom and T-shirt bags. CB2P is equipped with four feeding devices to produce four lines non-printed bags, CB3P is equipped with six feeding devices to produce six lines non-printed bags Punch press in-line to automatically produce T-shirt bags Equipped with conveyor & heat needle devices The machine will stop automatic when there is no film, stuck film & lower temperature Servo motor & photocell are options We didn’t show all specification & model, please kindly contact us for other model & details specification
Vibration Welding Machine HWV-M55LS
Categories : Welding & Surface Treatment Equipment
Vibration welding uses frictional heat to join the interface of two thermoplastic parts under mechanical pressure, the upper clipper clips the thermoplastic to do a high frequency reciprocating according the setting amplitude, it will have frictional heat generated to fully melt the interface, then stop moving and continued to put pressure and cooled to weld two thermoplastic parts
Flat Yarn Extrusion Line - Raffia Tape Stretching Line
Categories : Extrusion Lines For Filaments and Yarn
HY7/SP-80HE,90HE,100HE,110HE,120HE
3-Layer ABA Co-Extrusion Blown Film Machine
Categories : Co-Extrusion Blown Film Machines
3-LAYER ABA CO-EXTRUSION BLOWN FILM MACHINE Extruder 3-Layer (ABC) PE Group/PP/Recycled
Side Force Feeder Type Double Section Recycling Pelletizing Extrusion Line | CK-SFD
Categories : Pelletizing & Compounding Lines
CK-SFD series Side Force Feeder Type Plastic Recycling Pelletizing Line is ideal for recycling dirty plastic crushed films. Possible materials : EPE, EPP, EPS, PP, HDPE, LDPE, ABS, PS crushed films or flakes.
Surface Winding Slitting Machine Series-FSL-BT
Categories : Slitters and Rewinders
Design for slitting thin and slip plastic films of uniform thickness such as laminating paper, aluminum foil, stretch film, isolated film, sticker and other film rolls. The most smooth edge after slit is ensure by the surface wind method.
LDPE/LLDPE HIGH SPEED PLASTIC INFLATION MACHINE : KML-80
Categories : Blown Film Extruders
The KML-80 is a high-speed plastic inflation machine for blown film extrusion of LDPE and LLDPE resins, producing film up to 2,000 mm wide for applications such as plastic farm film and car film.The extruder unit is fitted with an Ø80mm screw at a 30:1 L/D ratio and a 75 HP AC driving motor with inverter, supported by 7-zone auto thermo control. The die unit uses an Ø500mm die and Ø550mm air ring, and the take-up unit runs at speeds up to 45 m/min across the 2000 mm effective width.Model: KML-80Suitable material: LDPE/LLDPEFilm thickness: 0.03-0.15 mmFilm width range: 2000 mmFilm output: 200 kgs/hrScrew diameter/type: Ø80mm, L/D ratio 30:1Driving motor: AC 75 HP + InverterTake-up speed: 45 m/minMachine dimension: 800×500×900 cm
STRETCH FILM LDPE/LLDPE PLASTIC INFLATION MAKING MACHINE : KML-45S/55S
Categories : Blown Film Extruders
The KML-45S/55S is a stretch film plastic inflation making machine that converts LDPE/LLDPE pellets into stretch film through blown film extrusion, with adjustable film thickness and width.The KML-45S runs an Ø45mm screw at a 30:1 L/D ratio with a 20 HP AC driving motor, producing film up to 600 mm wide at 20-55 kgs/hr; the KML-55S runs an Ø55mm screw at the same ratio with a 30 HP AC driving motor, producing film up to 900 mm wide at 30-72 kgs/hr. Both models include an auto tension controller, waste collecting winder, and adhesives auto-feeder.Models: KML-45S / KML-55SSuitable material: LDPE/LLDPE (both)Film thickness: 0.008-0.10 mm (both)Film width range: KML-45S 600 mm; KML-55S 900 mmFilm output: KML-45S 20-55 kgs/hr; KML-55S 30-72 kgs/hrScrew diameter/type: KML-45S Ø45mm; KML-55S Ø55mm (L/D ratio 30:1 both)Driving motor: KML-45S AC 20 HP + Inverter; KML-55S AC 30 HP + InverterEquipment: Auto tension controller, waste collecting winder, adhesives auto-feederTake-up speed: KML-45S 75 m/min; KML-55S 65 m/min
Flexographic Printing Machine - QF IN-LINE
Categories : Flexographic Printing Machines
Flexographic Printing Machine - QF IN-LINE
Large Pipe Shredder-J Series
Categories : Crushing, Shredding & Granulating Equipment
J1200 Pipe Shredding system is designed to process plastic pipe or plastic profile with a 6-meter-long, 1200 mm diameter. Four-shaft shredding design is a leading technology in the world and an initiative origination in China. With the best cutting rotor assignment, the fours shafts form the best cutting angle. Separate motor starting design highly reduces import for the electricity network. The cutting shaft can be controlled separately, so as to bring down the running cost of the machine. Every cutting shaft owns specific features according to its location, to achieve the best cutting effect. The feeding system is equipped with a multilevel hydraulic cylinder, powered and controlled by an efficient, stable, and automatic control system. Feeding speed can be controlled for shredding different materials so that the target of energy saving can be achieved. The equipment is with a compact and reliable design. Safe checking doors and covers are designed with hydraulic opening devices for easy maintenance.
E-3 Intelligent High Power AVR / Stabilizer (PSN)
Categories : Electronic, Automation and Safety Components
Specially for whole plant power equipment Intelligent High Power Automatic Voltage Regulator with large capacity sectional and divisional design, it is suitable for entire plant voltage regulation. Combining with distribution panel, it is very convenient to build to the site. Electrical and mechanical monitoring / feedback / warning and remote contact as well as high power surge suppressor, it meets international standard IEEE587 specification.
Plastic Lump Crusher
Categories : Crushing, Shredding & Granulating Equipment
Easily maintenance with hydraulic opening body for cleaning residue and changingthe blades. Includes stable energy current system that helps you save energy and with special design on the rotary cutting angle. Bearings have been installed outside of the machine body that enables you to give easy maintenance. The bearings will not be influenced by the temperature of the body, which will increase durability. Hopper is able to take in big plastic products, thanks to the rotating diameter that has been considerably increased. Application- Plastic bottles, plastic tanks, Drums, appliances covers, etc.
Hinged Container EG-66
Categories : Rigid Packaging & Containers
Product Number: EG-66 Color: Natural Material: Fiber Shape: Clam shell
