English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
2.5M wide, 3-layer Air Bubble Film Extrusion Line (With 2 Unwinders)
Categories : Cast Film and Sheet Extrusion Lines
Various models to meet with your needs. Sheet width from 1,200MM to 2,500MM, from 2 layers to 10 layers. Tailored-made machine available.
High-Speed Injection Molding Machine (SA-p Series)
Categories : Toggle Clamping Injection Molding Machines
It is a newly-released servo hydraulic energy-saving model with outward toggle clamping unit, especially suitable for producing bucket containers. With clamping force ranging from 220 tons to 1,000 tons.
Twin Shaft Shredder (Kroko Twin Series)
Categories : Crushing, Shredding & Granulating Equipment
Intelligent control system The program system monitoring the shredding status and allows automatically reverse and forward motion to keep most stability while creating best production. High radial loads with high efficiency and great stability The professionally designed shaft and blades are made with high wear-resistant steel and processed by heat-treatment to increase the service life. It can withstand higher radial load and create higher efficiency while keep the best stability.
SINGLE SCREW AND BARREL FOR BLOW MOLDING
Categories : Screws and Barrels
Screw is the most essential part of blow moulding system, Screw design for blow moulding is the first step in good parison formation, and a major move toward achieving lower overall cycle times. Unlike injection molding, blow molding screws are normally designed for a specific type of material and application, therefore, the screw and barrel for blow molding system such as injection blow moulding machine, PET blowing machine, PET stretch blow moulding machine, extrusion blow moulding, HDPE blow moulding machine that Nan Yun designed is able to provide a high rate of through-put to meet our clients' need.
Solid State Relay
Categories : Control Equipment / Systems
All solid state, optically coupled for 2500VAC isolation between input and output circuit Able to be driven by IC such as TTL & CMOS Internally mounted snobbier circuit protection for huge current application A LED can indicate the operating of devices Long services life and high reliability
Storage Tank with Blowing-PSP
Categories : Material Handling, Conveying & Storage
The PSP series storage tank with optional blower is Sino-Alloy’s solution for the temporary storage of the rubber or plastic pellets before packaging. The PSP series storage tank is made of stainless steel and can be customized to the customer’s specifications. The optional blower/dryer can help ensure there is no buildup of residual moisture. An optional vacuum loader can transport the rubber or plastic pellets from the PSN separator directly to the PSP storage tank. Also available with a packaging function includes air control valves to regulate the output quantity and an automatic weight scale.
6 COLORS FLEXO PRINTING MACHINE (HIGH SPEED TYPE)
Categories : Flexographic Printing Machines
These flexographic printers are able to print in six colors with the following possibility: 0+6, 1+5, 2+4, 3 +3 Max. printing speed 70-80 mts/min Standard printing length is max. 800 mm, bigger printing length can be requested as your demand Equipped with Edge Position Controller (EPC) We didn’t show all our models, please don’t hesitate to contact us for bigger printing machines.
Twin Shaft Pre-Shredder-TS Series
Categories : Crushing, Shredding & Granulating Equipment
TS Series Two Shaft Shredders are low speed high torque hydraulic driven size reduction machines. The shredding shafts are bi-directional, therefore increasing the cutting efficiency and capacity of the machine whilst maximizing knife utilization.
High Precision Injection Mold
Categories : Injection Molds
-Design & Development of Diversified Precise Molds -Mold flow analysis & optimized solution for mold design -Specialized molding system: Sale & Integration (PET/IML/Medical series) -Turnkey Solution Planning & Technology Transferring (operators’ training included)
3 Layer Co-Extrusion PE/PP Lamination Machine for Flexible Packaging Film CE Certificate
Categories : Extrusion Lamination Machines
3 Layer Co-Extrusion PE/PP Lamination Machine for Flexible Packaging Film CE Certificate
T-Shirt Bag Making Machine QTG-850S2
Categories : Bag Making Machine by Applications
T-Shirt Bag Making Machine
Dual-Line Analog Input Process Meter - DL Series
Categories : Sensing, Monitoring & Inspection Equipment
Viatran's multi-purpose, easy-to-use DL Series analog input process meters are ideal for level, flow rate, temperature, or pressure transmitter applications. They accept current and voltage signals (e.g. 4-20 mA, 0-10 V). Three of the front panel buttons can be custom-programmed for a specific operation. The analog input can be scaled to display the process in two different scales; for example, the main display could indicate level in feet and the second display could indicate the volume in gallons.
Side Feeder / Side Feeder Twin Screw
Categories : Dosing, Measuring & Mixing Equipment
CYKF developed its own twin screw side feeder to enable the feeding of additives and fillers, such as glass fiber, CaCO3, TiO2, Talc, fire retardant, etc. Materials in powder or pellet are all acceptable. Our rich experiences in plastic extrusion help us catch the critical design points to satisfy different production requirements.
Low Pressure High Flow Proportional Regulator(0-8bar)
Categories : Sensing, Monitoring & Inspection Equipment
Product Serial: QKL-B1H
Flexographic Printing Machine for PP Woven Bags
Categories : Flexographic Printing Machines
● The BOTHEVEN Flexographic Printing Press #MP Serial is design for fabric sheet printing, such as after cutting and bottom sewing of laminated or un-laminated bag, paper bag ....etc. ● Easy operation, easy change printing plate. ● Special design a Action Roller dispense device, the printing cylinder won't dirty conveyor when empty load.
LDPE/LLDPE HIGH SPEED PLASTIC INFLATION MACHINE : KML-35
Categories : Blown Film Extruders Lines
The KML-35 is an LDPE/LLDPE blown film extrusion line within PRM-Taiwan's plastic inflation machinery category, where LDPE/LLDPE resin is extruded and inflated into tubular film through a die and air ring before take-up and winding. The KML-35 processes film in 0.015-0.15 mm thickness at up to 500 mm width, with output between 10-30 kgs/hr. The extruder runs a Ø 35mm screw at a 26:1 L/D ratio with 3-zone auto thermo control on the barrel, driven by an AC 10 HP motor with inverter. The die unit uses a Ø100 mm die with a Ø150 mm air ring, and the take-up section reaches speeds up to 75 m/min. Model: KML-35 Suitable material: LDPE/LLDPE Film thickness: 0.015-0.15 mm Film width range: 500 mm Film output: 10-30 kgs/hr Screw diameter: Ø 35mm, L/D ratio 26:1 Driving motor: AC 10 HP + Inverter Machine dimension: 400×120×380 cm
Extrusion Molding Machine Plastic Auxiliary Solutions
Categories : Turnkey & Auxiliary Integration Solutions
We are capable of offerring a wide range of auxiliary equipment specificaly for extrusion molding mechines, like hopper dryers, dehumidifying dryers, chillers, PET crystallizers, vacuum loaders, mold temperature controllers, master-bacth feeders and auto dosing and mixing systems. Better company image Greater productivity Lower cost Better energy efficiency Less material waste and pollution during the conveying process Better working environment Less noise due to the separation of the blowers from the working place
Vertical Mixer / Blender (YBVM)
Categories : Mixers and Blenders
Applied with vertical gear speed reducer and multi blades of helical angles, the inner surface is stainless made, no pollution and durable. Mix well and rapidly. With motor overload protector and power safety device, operation is safe and easy.
Knotless Fishing Net Making Machine SR-KF series
Categories : Industrial Knitting Machines
Fishing net making machine of SR-KF Series is single needle bed Raschel knitting machine designed for making knotless fishing nets with various specifications in all different kinds of raw material; for example, Nylon, PE, PP, etc. The control panel of this series adopts inverters or servo motors to control speed, easy for machine operation and adjustment.
High Speed Side Sealing Bag Making Machine with Servo Motor Control Model: CWSS-SV
Categories : Plastic Bag Making Machines
High Speed Side Sealing Bag Making Machine with Servo Motor Control Model: CWSS-SV
GRP-H Single-phase solid state relay with Advanced Diagnostic, up to 120A
Categories : Control Equipment / Systems
The ability to propose customized control solutions allows to rapidly satisfy the most different automation needs. For this purpose, the GRP series provides a wide range of extremely compact SSRs, with a solid basic structure but scalable as current sizes (from 15A to 120A), control type and configuration features. Current range from 15A up to 120A Ultra slim dimension IO-Link communication Digital and proportional (V/mA) command Control mode (ZC/BF/HSC/PA) Linear resistance and Infrared lamps (LWIR/MWIR) heaters control Load voltage 480Vac, 600Vac Opt. Partial heater break alarm (1/8) NFC configuration Din rail mounting
2 Lanes Chicken Bag Side Sealing Bag Machine
Categories : Plastic Bag Making Machines
The MGA-06-800CB2 is Ming Jilee's 2-lane chicken bag side sealing machine, converting PE blown film into side-sealed chicken bags. A Japanese-made servo motor controls bag size precisely for consistent quality, while a dancing roll station with AC motor and inverter speed control keeps unwinding flexible and efficient.The machine handles curved shapes at high sealing speed, with a built-in suction unit that removes waste and an adjustable holes puncher for precise hole alignment. Its strong sealing bar delivers clean cuts and consistent seal quality across the 75 - 800 mm effective bag width.Model: MGA-06-800CB2Feed material: PE Blown FilmThickness range: 0.02 - 0.08 mmEffective width of bag for side seal: 75 - 800 mmEffective chicken bag length for twin lines: Max. 350 mmEffective chicken bag length for single line: Max. 700 mmOutput (chicken bag): 120-260 pcs/minMachine dimension: 7,600 (L) × 1,700 (W) × 1,960 (H) mmRequired power: 7KW
Repet Wood WPC Granule Pelletizer Plant
Categories : Pelletizing & Compounding Lines
Indoor & outdoor building material Outdoor furniture
4 Color Reel-to-reel Offline Type Flexo Printing Machine: LL-5000 Model
Categories : Flexographic Printing Machines
Reel to reel type off-line flexographic printing machine, very good quality for printing the color flexible of 4+0, 3+1, 2+2, machine standard with the manual tension control, machine frame is iron casted and varnish coated, very strong and long duration. Upper side with 2 sets drying box, the films after printing will guide to the drying boxes for drying, ensure that the films can be dried accordance with the speed.
Hinged Container EG-991
Categories : Rigid Packaging & Containers
Product Number: EG-991 Color: White Material: Fiber Shape: Clam shell
Skip Conveyor
Categories : Material Handling, Conveying & Storage
For material conveying after from dispersion Kneader
Metal Detecting Separators - SMS
Categories : Separating & Filtration Equipment
SMS series metal detecting separators are highly sensitive and accurate in detecting and separating metal grains, such as steel, iron, copper, aluminum, lead, tin, etc. It can be installed directly on injection molding machine or (extruders) hoppers to protect the screw of machine from the damage caused by hard metals. When it installed on the injection molding machine or on hopper of the extruder, material level sensor should be mounted on the hopper to prevent material blockage which affects machine testing.
Self-Cleaning Filter
Categories : Pelletizing & Compounding Lines
Quality Boosting & Cost Saving The two scrapers in the filter remove the residues filtered from the surface of the special precision processed screen. Then, they are emitted from the bottom screw. With the pressure sensor and inverter, this filter can control the scraping speed as well as stabilize and maintain the pressure inside the flow automatically. This filtration process can reduce residues by over 80% of the melted polymer. GENIUS
Rewinder Machine
Categories : Slitters and Rewinders
This machine can rewind large roll to become small roll.
Side Entry Robot SSE
Categories : Automation, Robotics & Software
SSE industrial robot is designed for thin-walled products which cycle time below 6sec. With its high speed features can improve the production efficiency. Suitable for injection molding machine with clamping force under 400 tons.
Tensile Strength Tester
Categories : Sensing, Monitoring & Inspection Equipment
The GT-7010AEP is specially designed for measuring the strength of PP/HDPE flat yarn.
Overmolding Injection Molding
Categories : Household & Daily Goods
Overmolding Injection Molding Technology is a multi-material molding process that combines two or more materials in a single mold to enhance structural integrity, comfort, and functionality. This process allows flexible materials (such as TPE, TPU, or silicone) to be molded over a rigid substrate (such as ABS, PC, or PA), providing superior grip, durability, and impact resistance. This technology is widely used in automotive, electronics, medical devices, and consumer products, particularly for components requiring ergonomic design, shock absorption, anti-slip surfaces, and sealing properties. Compared to traditional assembly methods, overmolding technology offers cost savings, improved structural integrity, and an enhanced product appearance and feel.
32 OZ Round Bowl EG-32
Categories : Rigid Packaging & Containers
Product Number: EG-32 Color: Natural Material: Fiber Shape: Round
Surface Winding Slitting Machine Series-FSL-BT
Categories : Slitters and Rewinders
Design for slitting thin and slip plastic films of uniform thickness such as laminating paper, aluminum foil, stretch film, isolated film, sticker and other film rolls. The most smooth edge after slit is ensure by the surface wind method.
Separator-PSN
Categories : Separating & Filtration Equipment
The PSN series separator was developed by Sino-Alloy Machinery as an important accessory to their extruder line to ensure uniform pellets Powerful high-speed vibration motors with multiple screens and mesh sizes to filter out small fines and large agglomerates. Optional air-cooling and dehumidifying functions can be added to further reduce the heat and moisture of the pellets.