English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
JIT Shopping Bag Making Line (JIT Series)
Categories : Bag Making Machine by Applications
The JIT Series is JANDI'S in-line shopping bag making line. Blown film extrusion, printing and bag making run as one continuous process, so resin enters at one end and finished, printed shopping bags leave at the other; there are no intermediate film rolls to store, transport or re-load. This listing covers the series as a whole, which is offered in mono-layer semi-automatic and full-automatic types, an ABA full-automatic type and a two-colour full-automatic type.Because the steps are linked, JANDI'S describes the line by what it removes from a conventional three-machine set-up: separate handling between extrusion, printing and bag making, the floor space and storage for film rolls, and the die-cut scrap, which is recovered on-line and fed back. Line composition, printing configuration, bag size and output are configured with the buyer at quotation.Type: in-line shopping bag making line, JIT SeriesProcess: blown film extrusion, printing and bag making in one lineConfigurations: mono-layer semi-auto, mono-layer full-auto, ABA full-auto, two-colour full-autoSingle-side printing configuration, colour count confirmed at quotationDie-cut scrap recovered on-lineNo intermediate film roll storage between stepsLine composition, bag size and output configured at quotation
T-Shirt Bag Making Line (JIT-45D)
Categories : Bag Making Machine by Applications
The JIT-45D is the 2-Color T-shirt Bag Making Line in JANDI'S JIT series. Rather than a stand-alone bag machine, a JIT line links blown film extrusion, printing and bag making into one in-line process, so that resin enters at one end and finished, printed T-shirt bags leave at the other without intermediate film rolls being stored and re-handled. The 45D designation identifies the two-color printing configuration of the line.The JIT series is offered in several configurations — mono-layer semi-automatic and full-automatic types, an ABA full-automatic type and the 2-color full-automatic type represented by the JIT-45D — so the line can be matched to the film structure and print requirement of the bag. Line composition, film width and output are configured with the buyer at quotation, and the specification table below lists the models in the series.Type: T-shirt bag making line, in-line blown film, printing and bag makingConfiguration: 2-Color full-automatic typeModel: JIT-45DSeries alternatives: mono-layer semi-auto, mono-layer full-auto, ABA full-auto typesLine composition and output configured at quotation
T-Shirt Bag Making Line (JIT-55)
Categories : Bag Making Machine by Applications
The JIT-55 is the mono-layer semi-automatic type in JANDI'S JIT T-shirt bag making line. A JIT line links blown film extrusion, flexographic printing and bag making into one in-line process: resin goes in at one end and printed, heat-cut T-shirt bags come out at the other, without film rolls being stored and re-handled between steps. The line is specified for biodegradable material as well as HDPE resin with filler.The in-line flexographic printer runs water-based and solvent-based inks, a bobbin change unit allows non-stop operation, and a waste recovery unit returns the die-cut scrap to the line. Compared with the two-colour full-automatic type in the same series, the JIT-55 is the semi-automatic configuration; bag size, motor size and roller width are listed in the specification table below.Type: T-shirt bag making line, in-line blown film, printing and bag makingConfiguration: mono-layer semi-automatic typeModel: JIT-55Material: biodegradable material, HDPE resin, fillerIn-line flexographic printer for water-based and solvent-based inksBobbin change unit for non-stop operationHeat-cutting type bag sealing unitWaste recovery unit for on-line reuse of die-cut scrap
Side Sealing Bag Making Machine (GF-32SE/SV)
Categories : Plastic Bag Making Machines
The GF-32SE/SV is a servo-driven side sealing bag making machine, the machine type used for clear packaging bags, garment bags and similar side-sealed formats. Within the series — GF-24SE/SV, GF-32SE/SV, GF-40SE/SV and GF-50SE/SV, with matching GF-S600/SV to GF-S1200/SV models — the GF-32SE/SV has a cutting width of 800 mm and a cutting length of 800 mm, on film from 0.01 - 0.1 mm. Production is Max. 200 Cycles/Min for the SE model and Max. 150 Cycles/Min for the S model.The rear feeder is supplied with gusset, fold, slitter and adhesive tape applicator functions, the control panel uses an HMI, and the servo drive is YASKAWA/JAPAN with a SICK/GERMANY printing scanner. A conveying belt and collecting table are included. Options extend the machine to tension control, EPC, a triangle folding device, punch hole and Mexican hat punch devices, ultrasonic sealing, a perforating sealing knife, an envelope punching mold and an automatic stacking table.Type: side sealing bag making machine, servo driveSeries: GF-24SE/SV, GF-32SE/SV, GF-40SE/SV, GF-50SE/SV (GF-S600/SV to GF-S1200/SV)Cutting width: 800 mm; cutting length: 800 mmFilm thickness: 0.01 - 0.1 mmProduction: SE model Max. 200 Cycles/Min; S model Max. 150 Cycles/MinRear feeder with gusset / fold / slitter / adhesive tape applicator; HMI control; servo YASKAWA/JAPAN; printing scanner SICK/GERMANYOptions: tension control, EPC, triangle folding, punch hole, Mexican hat punch, ultrasonic sealing, perforating sealing knife, envelope punching mold, automatic stacking table
Blow Molding Machine PBI-X Series
Categories : Extrusion Blow Molding Machines
This series of machine is equipped with a standard accumulator head. Especially ideal for producing picnic tables, tool boxes, toys, automotive duct, L-ring drums and stacking chemical drums up to 220 liters.
Blow Molding Machine PBS 905 Series
Categories : Electric Blow Molding Machines
Powerful, crank type mold clamping system combined with German linear guides for maximum stability. This series is ideal for producing medium and large sized containers.
3-Layer Photo & Name Card Pocket Making Machine
Categories : Bag Making Machine by Applications
The MGA-21A-700-4(6)SP is built for 3-layer photo pockets, name card pockets, and other data pockets, running fully automatic production from material infeed to finished product to reduce labor input and raise output. Multiple sets of ultrasonic sealers keep the seal elegant, tight, and trim.The infeed stand uses an auto edge tracing device and auto tension controller for easy, convenient operation, and the parts work with the control and monitor system to stop the machine automatically with an alarm if trouble occurs, protecting both material and machine. An optional corner rounding mould can be added, using computer-controlled cutting to produce round-corner photo pockets.Model: MGA-21A-700-4SP / MGA-21A-700-6SPMax cutting size: L 90 - 550 / W 350Film thickness: 0.035 - 0.12 mmProduction: 30 - 90 pc/minPower required: 6 kw (4SP) / 8 kw (6SP)Machine (L x W x H): 320" x 60" x 75"Weight: N.W. 3,876 kg / G.W. 4,461 kgOptional equipment: up and down alternate collector, hot stamping device, 8mm hole punching device, 6mm hole punching device
Blow Molding Machine PBSS SERIES 605 / 705 (S / D / T / Q)
Categories : Injection Blow Molding Machines
Double Stations Series Double station machine, full automatically, suitable for producing high-production runs of medium size bottles, ex. Cosmetic bottles detergents, etc. Mold-platen moves properly with high stability and high efficiency Three tie-bar horizontal traveling mold carriage combined with German linear motion guides for outstanding performance and high efficiency. This series is designed to meet high production and small size container requirements. Available to equip with auto de-flashing device and take out robot to achieve fully automatic and highly efficient production. 10" TFT colorful LCD screen with human-machine interface control system. It provides powerful functions, convenient and user-friendly operation.
Blow Molding Machine PBSS - 905 O/1005 O
Categories : Electric Blow Molding Machines
It is designed for small containers Mouth-to-Mouth design. Mouth-to-Mouth design can improve two-time production for double-station machines. It creates a unique and new mold design and auto cutting device. It can increase machine stability and decrease defective rates. This is the latest high-producion machine technology.
Blow Molding Machine PBSS SERIES - 905 / 1005 (S / D / T / Q)
Categories : Horizontal Blow Molding Machines
Powerful, crank-type mold clamping system combined with German linear motion guides for outstanding performance and high efficiency. This series is designed to meet high production requirements. Available to equip with auto deflashing device and take-out robot to achieve fully automatic, highly efficient production. 10" TFT colorful LCD screen with human-machine interface control system. It provides powerful functions, maximum operational convenience and user-friendly operation.
85-150 ton injection molding machine product
Categories : Electrical & Electronic Accessories
This 85-150 ton injection molding machine is designed for high-precision plastic product manufacturing, including automotive components, electronic parts, appliance housings, medical devices, and consumer goods. Equipped with a high-efficiency servo-driven system, it ensures stable injection pressure and precise control, delivering superior molding quality. With a high-rigidity clamping structure and an optimized hydraulic system, this machine offers durability and operational efficiency. It supports various plastic materials (PP, PE, ABS, PC, PA, etc.) and can be customized with multi-stage injection units and robotic interfaces for full automation, reducing labor costs and increasing productivity. Ideal for OEM manufacturers, plastic molding factories, and precision molding industries, this model meets modern production demands with efficiency and precision.
Twin Taper Screws With Two Rolls Sheet Machine (Rubber Sheet Performing Machine)
Categories : Dispersion Kneaders
This Machine For KNEADER、BANBURY Auxiliary Equipment, The Compound Mixing Discharge Feed Into Twin Taper Screw To Automatic Extrusion Sheet, Also Can Continuity Produce, The「Automation Continuity Sheet」Process Design, Can To Replace Mill「One People - One Machine」Conventional Process, Not Need Worker Operation, Increase Machine Automation Production Security And Convenient, Increase Property Added Value, It Is The Best Automation Produce Equipment.
