English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
HDPE HIGH SPEED PLASTIC INFLATION MACHINE : KMH-35
Categories : Blown Film Extruders
The KMH-35 is a high-speed HDPE blown film extrusion line within PRM-Taiwan's plastic inflation machinery category, where HDPE resin is extruded and inflated into tubular film through a die and air ring before take-up and winding. The KMH-35 produces HDPE film in 0.008-0.10 mm thickness and up to 400 mm width, with output between 10-28 kgs/hr.The extruder uses a Ø 35 mm screw at a 26:1 L/D ratio, driven by an AC 15 HP motor with inverter and backed by 3-zone auto thermo control on the barrel. The die unit runs a Ø50/80 mm die with a Ø120 mm air ring, and the take-up section operates at speeds up to 85 m/min.Model: KMH-35Suitable material: HDPEFilm thickness: 0.008-0.10 mmFilm width range: 400 mmFilm output: 10-28 kgs/hrScrew diameter: Ø 35 mm, L/D ratio 26:1Driving motor: AC 15 HP + InverterMachine dimension: 350×260×310 cm
HDPE HIGH SPEED PLASTIC INFLATION MACHINE KMH-45/55
Categories : Blown Film Extruders
The KMH-45/55 is an HDPE blown film extrusion line offered in two model variants for plastic shopping bag production. Within the plastic inflation machinery process, HDPE resin is extruded and inflated into tubular film before take-up and winding. The KMH-45 produces film up to 650 mm width and the KMH-55 up to 900 mm width, both in 0.008-0.10 mm thickness.The KMH-45 runs a Ø 45mm screw and the KMH-55 a Ø 55mm screw, both at a 26:1 L/D ratio with 3-zone auto thermo control on the barrel. Driving motors are AC 20 HP for the KMH-45 and AC 30 HP for the KMH-55, both with inverter, and each die unit pairs with its own air ring for bubble cooling.Models: KMH-45 / KMH-55Suitable material: HDPEFilm thickness: 0.008-0.10 mm (both models)Film width range: 650 mm (KMH-45) / 900 mm (KMH-55)Film output: 10-42 kgs/hr (KMH-45) / 20-60 kgs/hr (KMH-55)Screw diameter: Ø 45mm (KMH-45) / Ø 55mm (KMH-55), L/D ratio 26:1Driving motor: AC 20 HP + Inverter (KMH-45) / AC 30 HP + Inverter (KMH-55)Machine dimension: 470×165×400 cm (KMH-45) / 500×200×400 cm (KMH-55)
HDPE HIGH SPEED PLASTIC INFLATION MACHINE : KMH-65
Categories : Blown Film Extruders
The KMH-65 is a high-speed HDPE blown film extrusion line built for wide-format film production, used in applications such as plastic shopping bags. Within the plastic inflation machinery process, HDPE resin is extruded and inflated into tubular film through a die and air ring, then flattened and wound. The KMH-65 produces HDPE film in 0.008-0.10 mm thickness and up to 1300 mm width, with output between 20-80 kgs/hr.The extruder runs a Ø 65 mm screw at a 26:1 L/D ratio with 4-zone auto thermo control on the barrel, driven by an AC 50 HP motor with inverter. The die unit uses a Ø100/150 mm die paired with a Ø150/200 mm air ring, and the take-up section reaches speeds up to 75 m/min.Model: KMH-65Suitable material: HDPEFilm thickness: 0.008-0.10 mmFilm width range: 1300 mmFilm output: 20-80 kgs/hrScrew diameter: Ø 65 mm, L/D ratio 26:1Driving motor: AC 50 HP + InverterMachine dimension: 600×400×600 cm
HDPE High Speed Inflation Machine (GF-H45)
Categories : Blown Film Extruders
The GF-H45 is a high-speed blown film line for HDPE (high density polyethylene), the material used for thin, crisp bags such as grocery and produce bags. It is one of five sizes in the GF-H series, which spans the GF-H35 to the GF-H65, and is specified for a maximum film width of 600 mm. The extruder carries a 45 mm screw with a 20 HP inverter-controlled motor, and the 70 mm die is matched with a dual-lip air ring and a 3HP inverter-controlled blower.Output is rated at 40 KG/HR. The take-up tower is a fixed type with a 700 mm roller width, and winding is on a single-station manual surface winder controlled from an independent switch board. Options cover an auto loader, manual screen changer, pressure gauge, die rotating unit, LDPE dies and air ring, corona treater, embossing unit, second-station winder and air shaft.Material: HDPEMax. film width: 600 mmExtruder: 45 mm screw, 20 HP motor with inverterDie: 70 mm with dual-lip air ring; blower 3HP with inverterMax. capacity: 40 KG/HRTake-up: tower fixed type, 700 mm roller width; single-station manual surface winderOptions: auto loader, manual screen changer, die rotating unit, LDPE dies/air ring, corona treater, embossing unit, 2nd station winder
Post-Gusseting Rewinding Machine TRGT
Categories : Film and Sheet Extrusion Lines
Heat-trimming + Post-gusset device - Heated trimming knife trim and seal edge of film. Post-gusset device blow up and gusset tubic film from both sides and rewinder rewind bobbin film. Heated creasing device - Auxiliary press the crease-line for film which are difficult to crease.
Center Seal and Gusset Machine-FK-N
Categories : Plastic Bag Making Machines
This machine is well suited for producing thick and multi-laminate film such as poly bags with center sealing and side gusseting. When combined in operation with FSC-303 Three Step Bottom Sealing and Cutting Machine, it provides the same function as an in-line model Center Seal and Gusset Bag Making Machine
Gusset Machine
Categories : Plastic Bag Making Machines
The MGA-71-700 is Ming Jilee's gusset machine, folding side gussets into film for downstream bag production. It uses an automatic EPC system to keep output stable and standardized.A rewinding unit with automatic tension control maintains stable product output, while an automatic meter counter, automatic speed limit device and static eliminator system round out the line's process control.Model: MGA-71-700Max-cutting size (W×L): 150~550 mmFilm thickness: 0.025~0.12 mmProduction per min (PC): 10~80MMotor: 3HpPower required: 3.5KwN.W.: 1200KgG.W.: 1500Kg
Gravimetric Auto Dosing & Mixing System (ADMG)
Categories : Dosing, Measuring & Mixing Equipment
COST SAVE: ADMG can measure powder resin, granule resin, master-batch, or additive precisely. EASY OPERATE: By entering the percentage of each batch and supply value to operate effectively, HMI automatically calculates all required values operate and monitor by single personnel or connect a PC through a modern to through a modern to maintain the system or solve problem. HMI is dynamic and versatile to provide the most efficient and economic operation. ACCURACY & CONSISTENCY: ADMG automatically measures the required amount accumulatively in order when you add extra resins or additives which will not affect the precision of dosing or mixing. ERROR REPORT: Error problems are recorded the time by day, month, and year for the maintenance. EASY CLEAN & SPACE SAVE: Stainless design and individual function units are easy to discharge and install.
Gravimetric Doser SGD
Categories : Dosing, Measuring & Mixing Equipment
SGD gravimetric doser is suitable for continues precision dosing of masterbatch to the plastic process machine. The unit has a selection of four dosing screw sizes for different throughput needs. The unit can supports up to two sets of dosing screws for various material receipt. The lose-it-weight technology allows doser to measure and correct dosing to realize constant dosing precision. SGD syncronize dosing speed in extruder mode via analog 0~10V input from the extruder. Combination of Shini VL venturi loader realizes auto conveying of material to SGD at all time.
Gravimetric Blenders - SGB
Categories : Dosing, Measuring & Mixing Equipment
• Evenly mixing of materials after accurately weighing, control accuracy strictly of ±0.1~±0.3%. • Auto calibration after each material weighting ensures accuracy. • Up to 100 recipes can be stored for later use. • Alarm log function. • All parts detachable for easy cleaning. • For SGB-600 and models below, machine mount model is the standard supply (equipped with magnetic base,manual discharge valve), optional pneumatic slide gate is available also. • For SGB-2000 and models above, floor stand is the standard supply (equipped with moveable floor stand, storage hopper and pneumatic slide gate), optional SBU suction box is available also. • Has the function of recycled material compensation (recycling hopper is standardly equipped with low level switch). Aberration coompensation can be automatically calculated based to the feeding amount of recycled materials. • Memory card can be optional selected to store ratio information for product quality control. • Hopper low level sensor can be optional selected to send alarm when material is insufficent. • Optional analog signals (0~10V) output function for screw automatic adjusting of extrusion molding machine. • RS485 communication is optional to realize the centralized monitoring of connecting with molding machine. • Floor stand, pneumatic slide gate, storage bin and suction box should be optionally purchased for floor mounting. (Applicable for SGB-600 and models below)