English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
Mixing Screws
Categories : Screws and Barrels
＋For resins such as talcum powder with high viscosity and mixing difficulty. ＋To improve the mixing effect which can also work with screws for all kinds of resins. ＋To be made of SKD61 through special hardening treatment with high production & high mixing which can also work with screws for all kinds of resins.
HDPE High Speed Inflation Machine (GF-H45)
Categories : Blown Film Extruders
The GF-H45 is a high-speed blown film line for HDPE (high density polyethylene), the material used for thin, crisp bags such as grocery and produce bags. It is one of five sizes in the GF-H series, which spans the GF-H35 to the GF-H65, and is specified for a maximum film width of 600 mm. The extruder carries a 45 mm screw with a 20 HP inverter-controlled motor, and the 70 mm die is matched with a dual-lip air ring and a 3HP inverter-controlled blower.Output is rated at 40 KG/HR. The take-up tower is a fixed type with a 700 mm roller width, and winding is on a single-station manual surface winder controlled from an independent switch board. Options cover an auto loader, manual screen changer, pressure gauge, die rotating unit, LDPE dies and air ring, corona treater, embossing unit, second-station winder and air shaft.Material: HDPEMax. film width: 600 mmExtruder: 45 mm screw, 20 HP motor with inverterDie: 70 mm with dual-lip air ring; blower 3HP with inverterMax. capacity: 40 KG/HRTake-up: tower fixed type, 700 mm roller width; single-station manual surface winderOptions: auto loader, manual screen changer, die rotating unit, LDPE dies/air ring, corona treater, embossing unit, 2nd station winder
Five-Layer Co-Extrusion Blown Film Machine
Categories : Blown Film Extruders
Wide-Width Five-Layer Blown Film Solution for Water Bags and General Packaging KS-ML5-50-65-75-65-50 The KS-ML5-50-65-75-65-50 Five-Layer Co-Extrusion Blown Film Machine is a high-stability blown film line developed by KUNG HSING Plastic Machinery for water bag and general packaging film applications. Designed with LLDPE as the primary material (approximately 65–75%), this five-layer system integrates efficient cooling, precise gravimetric control, and stable take-up and winding systems to deliver consistent film quality in wide-width, medium-to-high output production.
HDPE Blown Film Machine
Categories : Blown Film Extruders
HDPE Blown Film Machine, CHYI YANG is Blown Film Extrusion Machine and Blown Film Machine Manufacturer, We mainly produce plastic film machinery whole plant equipment and inseparably linked with the life and development of plastic machinery in Taiwan.
Water Cooling Downstream 2-Layer Co-Extrusion Blown Film Machine
Categories : Co-Extrusion Blown Film Machines
Water Cooling Downstream 2-Layer Co-Extrusion Blown Film Machine, CHYI YANG is Multilayer Co-Extrusion Manufacturer, We mainly produce plastic film machinery whole plant equipment and inseparably linked with the life and development of plastic machinery in Taiwan.
Economical High-Speed Blown Film Machine
Categories : Blown Film Extruders
Cost-Effective, High-Speed Solution for T-Shirt Bags and Garbage Bags The KS-E45 Economical High-Speed Blown Film Machine is a practical and cost-efficient solution developed by KUNG HSING Plastic Machinery for manufacturers producing T-shirt bags and garbage bags.Designed with simplicity, reliability, and high take-up speed in mind, the KS-E55 enables stable thin-film production at low investment cost, making it an ideal entry-level or capacity-expansion machine for bag manufacturers.
Dual-Die High-Speed Blown Film Machine
Categories : Blown Film Extruders
Dual Die Design × Stable Speed × High-Efficiency Bag Production Solution The KS-E55S Dual-Die High-Speed Blown Film Machine is a high-efficiency production line developed by KUNG HSING Plastic Machinery for general packaging bag applications. Featuring a dual die head configuration, the KS-E55S significantly increases total output while maintaining a stable production speed. This design allows manufacturers to meet production targets without pushing a single die to extreme speeds—ensuring smoother operation and reducing operator pressure on the shop floor. By distributing output across two die heads, the machine delivers high productivity with stable line speed, enabling operators to work efficiently without being overwhelmed during winding and downstream processes.
3 Layer Co-Extrusion Inflation Machine (GF-L3C-MT)
Categories : Blown Film Extruders
The GF-L3C-MT is an A-B-C three-layer co-extrusion blown film line. Three extruders feed a co-extrusion die so that the inner, middle and outer layers of the film can be built from different resins, which is how a single film gains properties such as strength from one layer and sealability or surface finish from another. JANDI'S specifies the line for LDPE, LLDPE, mLLDPE, HDPE, EVA and PP.The MT configuration is built for wide flat film and gusseted film, with the film width and gusset width stated in the specification table below. Line configuration, film thickness range and downstream equipment are specified with the buyer at quotation, so the MT should be treated as a platform that JANDI'S tailors to the bag or packaging film the customer produces rather than a fixed catalog item.Type: A-B-C 3 layer co-extrusion blown film lineMaterials: LDPE / LLDPE / mLLDPE / HDPE / EVA / PPModel: GF-L3C-MTFilm width and gusset width: see specification tableDownstream configuration specified at quotation
PLA/ PBAT Blown Film Machine
Categories : Blown Film Extruders
The PLA/PBAT Blown Film Machine (GF-LB Series) is a blown film line configured for compostable and biodegradable resins based on PLA and PBAT. It produces tubular film from these compounds for downstream bag making, in the same way that JANDI'S GF-L series does for conventional polyethylene, and is listed in the showroom specification table as the GF-LB Series with film width and extruder size selected per model.The line is built from an extruder, a blown film die, an air ring, a take-up tower and a winder. Options include an auto loader, manual screen changer, pressure gauge, die rotating unit, corona treater, flying knife, second station winder, air shaft and air chiller. Film width, output and configuration are confirmed with the buyer at quotation; the specification table below lists the series range.Type: single-layer blown film machine, GF-LB SeriesMaterial: PLA/PBAT based compostable and biodegradable compoundsExtruder, blown film die, air ring, take-up tower and winderOptions: auto loader, manual screen changer, pressure gauge, die rotating unitOptions: corona treater, flying knife, second station winder, air shaft, air chillerFilm width and extruder size per model, confirmed at quotation
Tiny Inflation Machine (TINY-28)
Categories : Blown Film Extruders
The TINY-28 is a laboratory-scale blown film machine for HD, LD and LLDPE resin, intended for lab use and color testing and for producing small, thin film samples. It is the middle size of three, between the TINY-25 and the GF-HMM28. The extruder uses a 28 mm screw feeding a 40 mm blown film die, and temperature is controlled in 3 ZONES.Maximum film width is 200 mm at a maximum extrusion output of 8 KG/HR. The take-up unit has a 300 mm roller width and the single-station surface friction winder has an effective width of 200 mm. Because the machine is used for resin and masterbatch trials rather than production, JANDI'S notes that specifications can be changed to the customer's requirements.Application: lab use, color testing, small and thin filmMaterial: HD/LD/LLDPE resinMax. film width: 200 mmMax. extrusion output: 8 KG/HRExtruder: 28 mm screw; 40 mm blown film die; 3 ZONES temperature controlTake-up roller width 300 mm; winder effective width 200 mm
LD/LLDPE Super High Speed Inflation Machine (GF-L65ES-1)
Categories : Blown Film Extruders
The GF-L65ES-1 belongs to the GF-L ES super high speed series for LD and LLDPE film, positioned above the standard GF-L line for wider film and higher output. In the 65 mm size the line is rated for a maximum film width of 1600 mm and a maximum capacity of 180 KG/HR, with a 65 mm screw driven by a 75 HP motor and a 350 mm blown film die. Temperature is controlled in 7 ZONES from the control panel.The take-up unit is a tower fixed type with a 1600 mm roller width and a take-up speed of Max. 60 M/Min. Winding is single station, surface friction type, with semi-automatic pneumatic bobbin change. The option list is extensive: auto loader, pressure gauge, die rotating unit, LD/LLDPE die and air ring, stacked air ring, width control, corona treater, embossing roller, air chiller, vertical or horizontal oscillating take-up, edge or center position control (EPC or CPC), manual winder with air shaft, double station winder, auto tension control, hydraulic unloading, heat-slitting, second gusset unit, in-line bag making or printing machine, edge-trim winder and an edge-trim on-line re-use system.Material: LD/LLDPEMax. film width: 1600 mmMax. capacity: 180 KG/HRExtruder: 65 mm screw, 75 HP driving motor; 350 mm blown film dieTemperature control: 7 ZONESTake-up: tower fixed type, 1600 mm roller width, Max. 60 M/MinWinding: single station surface friction type, semi-auto pneumatic bobbin changeOptions: stacked air ring, width control, corona treater, oscillating take-up, EPC/CPC, double station winder, auto tension control, in-line bag making/printing, edge-trim re-use
LD/LLDPE High Speed Inflation Machine (GF-L55)
Categories : Blown Film Extruders
The GF-L55 is a single-layer blown film line for LD and LLDPE (low density and linear low density polyethylene). It sits in the middle of the GF-L series, which runs from the GF-L35 up to the GF-L65, and is configured for producing polyethylene film for bags and packaging at a maximum film width of 1000 mm. The extruder uses a 55 mm screw driven by a 40 HP motor with inverter control, feeding a 200 mm die fitted with a dual-lip air ring.Rated output is 90 KG/HR. The line is controlled from an independent switch board, and film is taken up on a 1100 mm roller width and wound on a single-station manual surface winder. Options include an auto loader, manual screen changer, pressure gauge, die rotating unit, corona treater, HDPE dies and air ring, flying knife, second-station winder, air shaft and air chiller, so the same base machine can be specified for HDPE or for downstream printing.Material: LD/LLDPEMax. film width: 1000 mmExtruder: 55 mm screw, 40 HP motor with inverterDie: 200 mm with dual-lip air ringMax. capacity: 90 KG/HRRoller width: 1100 mm; single-station manual surface winderOptions: auto loader, manual screen changer, die rotating unit, corona treater, HDPE dies/air ring, 2nd station winder, air chiller