English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
Masks Horizontal Flow Packaging Machine
Categories : Sealing Machines
The MGA-MSK-P is a horizontal flow packaging machine for wrapping finished masks, sealing them into bags formed from OPP, OPP/PE, or OPP/CPP packing film. It handles film thickness from 20 to 60 micron and produces bags from 90 to 350 mm in length, up to a maximum width of 450 mm.The machine accommodates packed products from 20 to 90 mm in width, running at 20 to 95 cycles per minute. It draws 4.5 kw of required power within a footprint of 3,880 (L) x 940 (W) x 1,530 (H) mm.Model: MGA-MSK-PPacking material: OPP, OPP/PE, OPP/CPPFilm thickness: 20 - 60 micronBag length: 90 - 350 mmMax. width: 450 mmPacked product width range: 20 - 90 mmOutput: 20 - 95 cycle/minMachine dimension: 3,880 (L) x 940 (W) x 1,530 (H) mmMachine weight: 800 kgRequired power: 4.5 kw
Loss-In-Weight Feeder
Categories : Dosing, Measuring & Mixing Equipment
Loss-in-weight feeder is a gravimetric metering device that provides continued feeding without cause batch problems. The feeder receives constant feedback from the sensor to ensure the materials are delivered in a precise amount that saves manpower successfully. CYKF provides different types of loss-in-weight feeders, including single screw, twin screw, and the models for feeding liquids. Various sizes and configurations are available to satisfy wide applications. Our team equipped with both profession and experience in the field of plastic extrusion. We provide suggestions and service for equipment integration to help customers save more money and get higher profits.
SPX 4-Series
Categories : Sensing, Monitoring & Inspection Equipment
■ 4-20mA loop-powered output ■ +/- 0.25% accuracy available ■ Wide selection of pressure ranges available ■ Turndown 6:1 ■ Configurations available for use in hazardous locations ■ Remotely configurable via HART ■ Precise, repeatable pressure measurements ■ Output supplied directly to DSC or PLC ■ Meets CE requirements ■ CE ATEX Intrinsically Safe Approved ■ SIL 2 Certified (pressure output) ■ PL'c' Certified (relay output) ■ Additional approvals are available
Lithium-ion Battery Recycling System
Categories : Non-Plastic/Rubber Recycling Systems
LiBs Recycling Line mainly deals with lithium-ion batteries from different sources, including, End-of-Life vehicle cells and small modules, cell phone Li batteries and note book Li batteries ect. The design of plant include shredding, solvent drying, air separation and density separation for the purpose of retrieving valuable material like blackmass, copper and aluminum material. Shredding without energy-releasing to increase working efficiency. Block valves are mounted on the discharge of the shredder to stop the backflow of the gas. Solvent materials are dried and collected by heating process, plastic material and battery separator can be collected according to requirement. Vibration separation and air separation are applied to remove heavy impurity material of the battery casing and release black mass for recovery. Air and gravity separation for copper and aluminum in a dry environment. Control System with oxygen control, temperature control, camera surveillance PLC and host computer to ensure the safety (More About "8 Basic Guides to Lithium-Ion Battery Recycling Machines and Systems" ...)
LS-A Contactless – with TWIIST technology – Analog output
Categories : Sensing, Monitoring & Inspection Equipment
The high performance in terms of robustness, thermal stability and EMC immunity make the LS-A series suitable for use both in industrial environments and mobile hydraulics applications. Strokes from 50 to 900mm Measurement: position Outputs: ratiometric, voltage and current Self-aligning mounting mechanism Direct and reverse analog output in single and redundant configurations Working temperature: -40...+85°C IP67 protection RoHS 2011/65/EU compliance M12 connector output - 4, 5, 8-pin male Overview Contactless linear position transducer with TWIIST patented technology for longer lifetime. The absence of contact on the sensing element allows to obtain a fully-sealed, robust and compact sensor. The high performance in terms of robustness, thermal stability and EMC immunity make the LS-A series suitable for use both in industrial environments and mobile hydraulics applications.
LDPE/LLDPE HIGH SPEED PLASTIC INFLATION MACHINE : KML-80
Categories : Blown Film Extruders Lines
The KML-80 is a high-speed plastic inflation machine for blown film extrusion of LDPE and LLDPE resins, producing film up to 2,000 mm wide for applications such as plastic farm film and car film. The extruder unit is fitted with an Ø80mm screw at a 30:1 L/D ratio and a 75 HP AC driving motor with inverter, supported by 7-zone auto thermo control. The die unit uses an Ø500mm die and Ø550mm air ring, and the take-up unit runs at speeds up to 45 m/min across the 2000 mm effective width. Model: KML-80 Suitable material: LDPE/LLDPE Film thickness: 0.03-0.15 mm Film width range: 2000 mm Film output: 200 kgs/hr Screw diameter/type: Ø80mm, L/D ratio 30:1 Driving motor: AC 75 HP + Inverter Take-up speed: 45 m/min Machine dimension: 800×500×900 cm
LDPE/LLDPE HIGH SPEED PLASTIC INFLATION MACHINE : KML-120
Categories : Blown Film Extruders Lines
The KML-120 is a high-speed plastic inflation machine for blown film extrusion of LDPE and LLDPE resins, producing film in a width range of 1800-3000 mm for applications such as plastic farm film. The extruder unit is fitted with an Ø120mm screw at a 30:1 L/D ratio and a 150 HP AC driving motor with inverter, supported by 8-zone auto thermo control. The die unit uses an Ø750mm die and Ø800mm air ring, and the take-up unit runs at speeds up to 22 m/min across the 3000 mm effective width. Model: KML-120 Suitable material: LDPE/LLDPE Film thickness: 0.05-0.15 mm Film width range: 1800-3000 mm Film output: 280 kgs/hr Screw diameter/type: Ø120mm, L/D ratio 30:1 Driving motor: AC 150 HP + Inverter Take-up speed: 22 m/min Machine dimension: 16.5×7×10 m
LDPE/LLDPE HIGH SPEED PLASTIC INFLATION MACHINE : KML-25
Categories : Blown Film Extruders Lines
The KML-25 is a compact LDPE/LLDPE blown film extrusion line for narrow-width film production, including applications such as car film. Within the plastic inflation machinery process, LDPE/LLDPE resin is extruded and inflated into tubular film through a die and air ring, then wound. The KML-25 produces film in 0.015-0.10 mm thickness and up to 150 mm width, with output between 5-15 kgs/hr. The extruder runs a Ø 25 mm screw at a 26:1 L/D ratio with 2-zone auto thermo control on the barrel, driven by an AC 3 HP motor with inverter. The die unit uses a Ø40 mm die with a Ø100 mm air ring, and the take-up section operates at speeds up to 45 m/min. Model: KML-25 Suitable material: LDPE/LLDPE Film thickness: 0.015-0.10 mm Film width range: 150 mm Film output: 5-15 kgs/hr Screw diameter: Ø 25 mm, L/D ratio 26:1 Driving motor: AC 3 HP + Inverter Machine dimension: 150×70×250 cm
Two Platen Injection Molding Machine (LM Series)
Categories : Injection Molding Machines by Platen
It is medium and large scale injection molding machine. It is applicable to automotive industry such as bumper and
KR Series Plastic Injection Molding Machine (SINGLE SLIDE)
Categories : Vertical Injection Molding Machines
Efficiently injection large work pieces with our versatile vertical injection moulding machine. Sturdy structure, easy-to-use layout. Customizable functions for specific products. Smooth movement, long lifespan. Ideal for a wide range of applications.
Mega Aspirator
Categories : Recycling Lines by Application
This product is a new label separator developed by Boretech. The principle is to make use of the different aerodynamic characteristics of the flakes and the label.Relying on the negative pressure air flow generated by the centrifugal fan, it can accurately and quickly separate the label and other light impurities in the PET flakes. Scope of application: 10-16mm PET, PP, PE flakes Material status: dry material or wet material
Label Remover Plus
Categories : Recycling Lines by Application
The Label Remover Plus integrates heat-shrink label scrapping and label removal functions • which can adapt to dry desorbing and wet desorbing at the same time, effectively improve the production environment, and significantly improve the label removal rate and finished product quality.