English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
Rotary Table Low Pressure Molding Machine
Categories : Horizontal Injection Molding Machines
Low pressure molding production is a process uses hot liquidify Polyamide material. Wire harnesses, connectors, sensors, micro switches, etc. These Automotive Electronics need to be waterproof and durable. rapid production, environmental protection, reduce the defect rates and better outlook design, the application of low-pressure injection machines in this automotive industry has gradually increased.
Plastic Pallet Mould
Categories : Injection Molds
Mold size: 1600W x 1700L x 944H mm Mold weight: 16800kg Injection machine: 3000TON Electronic parts
Multiple Embedded Rotary Injection Molding Machine-YR Series
Categories : Vertical Injection Molding Machines
• Vertical clamping with vertical injection. • Rotary table oscillate 180 °, rotate back / forth for easy loading and finished parts pick out, to increase productivity. • Rotary table with location pin, accurate positioning for mold alignment and automation. • Robot interface capability for complete automation. • Standardized wtih 2-sation function, and capable for 3-station or 4-station function & automation linkup for advanced efficiency. • Standardized wtih 3-column clamp, and available for 4-column clamp upon request.
ZH
Categories : Automation, Robotics & Software
•Servo motor controlled, side-entry robot, best accessor of rapid molding. •Two axis servo motor. •Bearing linear guide system, more stable and durable. •Molded parts with artistic appearance more accurate and smooth movement.
Semi-Automatic Packaging - Filling - CSL-F
CSL-F liquid filling equipment is semi-automatic liquid level filler for low viscosity liquid.
Vertical Electric Injection Molding Machine-YE-50V
Categories : Vertical Injection Molding Machines
A number of patented electric injection device Precision electric injection function Precision electric metering function Electric pedestal does not slide function Energy-saving hydraulic servo mold clamping function Accurate low pressure off mode protection function Energy-saving hydraulic servo thimble function Template rust plating processing Template parallelism fine tuning function Template low-top design With 8 T-groove, easy to fix the mold Thick template with high tensile guide posts Configuration template guide column anti-drip bumper sleeve Configure mechanical closing safety bars Configure mechanical shut-off safety electrical protection Open all the safety gates to stop the design Configuration key type safety door safety switch Configuration rail horizontal operation safety gate design Injection device can be flipped to maintain the factory accuracy to reduce the height of the handling method Injection closed loop feedback function Holding pressure switching point accuracy of 0.01mm Packing pressure accuracy of up to 0.1% High-speed rigid filling, to eliminate floating phenomenon Prevent the drawing function A variety of peripheral equipment chain function Equipped with peripheral equipment power outlet With robot centralized terminal block Hopper holder moving function Equipped with resin feed tube holder Equipped with adjustable height white iron trough Equipped with a perspective control water divider Equipped with cooling water quick connector The machine is neat and without any pipe exposure Than the same level of oil-saving 25% to 60% Than the same level oil machine to save cooling water 70% Equipped with 10.4 "color touch screen PID automatic temperature adjustment function Japan's Mitsubishi control system Equipped with wear-resistant material pipe
PET Stretch Blow Molding Machine - TEM04M1
Categories : Automatic Blow Molding Machines
FEATURE Adopt the touch screen control system with 64K color and friendly PLC operation. Exclusively designed machine construction makes it convenient to combine the blow molding machine with conveyor system. The preforms are automatically arranged in order for feeding system at a single way and the dividing carrier is driven by a servo motor; this way will avoid preforms jamming, causing machine down or preforms waste. Adopt a servo control screw driving system; it is rapid, stable, clean and environmentally friendly. The preforms are fed into the heating system in a matrix mode and uniform heated by single-lamp with double-sided heating. Employ a single-lamp with double-side heating design and will save about 50% heating consumption compared with competitor method. With the temperature feedback function, temperature in the heating oven is automatically controlled by adjustment of infrared lamps to reduce prefrom crystallization problems. Specially designed heating box upgrade convenience of maintenance in changing infrared lamp and cooling ramp. The clamping mechanism is driven by a combination of servo motor and cam; this results in accurate and stable motion, low noise and minimal pollution. Utilizes the air recovery system and efficiency up to 50% so that the low-pressure air compressor will not be required. This will save equipment investment costs and energy consumption by up to 15%.
ST-800 / 900
Categories : Automation, Robotics & Software
．Improved structural design leads to greatly reduced weight. ．20KG lighter than THS series ．And more lightweight than HX series by around 10KG ．On structure weight reduction, motors inside can work at lower load for a longer lifespan.
Two Roll Mixing Mill (Open Mill)
Categories : Rubber Mixing & Pre-Processing Equipment
The Two Roll Mixing Mill For Rubber、Plastic、PVC、EVA To Heating、Mixing And Chemicals Or Sulfur Material Uniformity It Can Be As Instead Of The Calender To Produce Un-Exact Rough Sheet Process.
KW-B2 BLISTER PACKING MACHINE
Categories : Capsule / Tablet Packaging Machines
KW-B2 blister packing m/c applies the latest technology contribute to a low cost, low packing material consumption.....
Auto Batch Vacuum Foaming System SA-1BVF
Categories : Foam Production & Processing Machines
The SA-1BVF can be used with an existing auto batch foaming machine or with SUNKIST's own SA-1B, SA-1BS, SA-1BM and SA-1HA. After the mixture is loaded into mold box, the mold box is moved into this chamber via a carriage. After the mold box us placed inside the curing chamber, the door of the chamber automatically closes and shut tightly. An operator can then adjust the pressure inside the chamber with the control panel. The quality and physical properties of the foam that is formed will be affected when the pressure is changed, ie. the volume of the foam size will increase, foam tensile strength will also increase dramatically, and the hardness of the foam will change. This machine is environmental friendly, reduce the amount of chemicals used and reduce the fire risk.
Hot Runner Controler
Categories : Control Equipment / Systems
High speed CPU. Panel with high brightness LED. With self - debugging function. PID controled. K, J type can be used.
Long Sheet Cutter (Conveyor Type) With Two Side Trimming Device, Platform And Winding Device
Categories : Foam Production & Processing Machines
It is specially designed for cutting flexible long block into thin sheet and winding foam into roll for quilting or laminating purpose.
Air Cooled Plastic Recycling Machine: Repro-Air
Categories : Recycling Lines by Application
● Air cooled type designed for HDPE, and LDPE in-house film waste ● Most suitable for small and mid-sized blown film manufacturers and factories to recycle their own plastic waste.
Laboratory\ Mixer For Liquid And Powder
Categories : Mixers and Blenders
Vibration Bag Mixer- Spare Caldrons 25L & 50L Can Be Used Interchangeably.
Rotational Mixer CL-RH
Categories : Mixers and Blenders
Features 3 Layers Ribbon Mixing Blade Layers Ribbon Mixing Blade Low Power Low Speed No Heat Accumulation Big Volume Save Electricity Good Dispersion Minimal Abrasion
TABLE TYPE AIR MOTIVE SEALING MACHINE-ET-900LF
Categories : Sealing Machines
1. Stainless Steel Frame and Anodized Alloy. 2. Low-Maintenance, Compact design. 3. Digital Controller Panel with Microcomputer program for different setting.
FHD Hot Air Dryer
Categories : Dryers and Dehumidifiers
Features PID temperature control and downward airflow design for uniform drying. Includes 7-day timer and overheat protection. Optional heat recovery system saves 40% energy, with capacities from 15-2000kg for diverse production needs.
