Search - shopping bag

8 Rolls T-shirt Bag Making Machine with Automatic Packing Unit

Categories : Bag Making Machine by Applications

2 Lines Hot Cutting T-shirt Bag Making Machine

Categories : Plastic Bag Making Machines

with 2 photocells 

JIT Shopping Bag Making Line (JIT Series)

Categories : Bag Making Machine by Applications

The JIT Series is JANDI'S in-line shopping bag making line. Blown film extrusion, printing and bag making run as one continuous process, so resin enters at one end and finished, printed shopping bags leave at the other; there are no intermediate film rolls to store, transport or re-load. This listing covers the series as a whole, which is offered in mono-layer semi-automatic and full-automatic types, an ABA full-automatic type and a two-colour full-automatic type. Because the steps are linked, JANDI'S describes the line by what it removes from a conventional three-machine set-up: separate handling between extrusion, printing and bag making, the floor space and storage for film rolls, and the die-cut scrap, which is recovered on-line and fed back. Line composition, printing configuration, bag size and output are configured with the buyer at quotation. Type: in-line shopping bag making line, JIT Series Process: blown film extrusion, printing and bag making in one line Configurations: mono-layer semi-auto, mono-layer full-auto, ABA full-auto, two-colour full-auto Single-side printing configuration, colour count confirmed at quotation Die-cut scrap recovered on-line No intermediate film roll storage between steps Line composition, bag size and output configured at quotation

Hot Cutting T-shirt Bag Making Machine

Categories : Bag Making Machine by Applications

1 line with 1 photocell

2 or 4 Lines Hot Cutting T-shirt Bag Making Machine

Categories : Bag Making Machine by Applications

with 2 photocells

T-Shirt Bag Making Machine for Biodegradable Material(GF-J/SV Series )

Categories : Bag Making Machine by Applications

The GF-J/SV Series is a T-shirt bag making machine configured for biodegradable material. It is the biodegradable-film version of JANDI'S GF-J/SV shopping bag machines: a servo-driven, heat-cutting bag maker that seals and cuts tubular film into T-shirt bags, set up for biodegradable film such as PLA and PBAT based compounds. As in the GF-J/SV range, the machine uses a tensionless sealing knife on a flat silicone sealing base, a heat-cutting blade, temperature controllers for the sealing and cutting stations, and a printing scanner for registering printed film. The SV models are fed from a pneumatic-lift jumbo roll unwind stand. Cutting width, cutting length, film thickness range and production speed are model-dependent and are confirmed at quotation. Type: T-shirt bag making machine for biodegradable material, GF-J/SV Series Material: biodegradable film such as PLA and PBAT based compounds Servo drive Tensionless sealing knife on flat silicone sealing base Heat-cutting type cutting blade Printing scanner for printed film Pneumatic-lift jumbo roll unwind stand Cutting width, length, film thickness and speed confirmed at quotation

All Function Side Seal Shopping Bag Making Machine SWPFA-V

Categories : Plastic Bag Making Machines

Patch handle bag - Includes film feeding & cutting devices. Patch piece welded by heat press against the main body. Softloop handle bag - Includes film feeding & cutting devices, loop film pressed and turn toward the sealing position. Heated mould seals loop film against the main body.

Side Seal Patch Handle Shopping Bag Making Machine

Categories : Plastic Bag Making Machines

Patch handle bag - Includes film feeding & cutting devices. Patch piece welded by heat press against the main body.

4-LINE / 6 LINE PLASTIC SHOPPING BAG MAKING MACHINE

Categories : Plastic Bag Making Machines

Double cutters for making bottom and T-shirt bags. CB2P is equipped with four feeding devices to produce four lines non-printed bags, CB3P is equipped with six feeding devices to produce six lines non-printed bags Punch press in-line to automatically produce T-shirt bags Equipped with conveyor & heat needle devices The machine will stop automatic when there is no film, stuck film & lower temperature Servo motor & photocell are options We didn’t show all specification & model, please kindly contact us for other model & details specification

LDPE/LLDPE HIGH SPEED PLASTIC INFLATION MACHINE : KML-45/55

Categories : Blown Film Extruders

The KML-45/55 is an LDPE/LLDPE blown film extrusion line offered in two model variants for plastic shopping bag production. Within the plastic inflation machinery process, LDPE/LLDPE resin is extruded and inflated into tubular film before take-up and winding. The KML-45 produces film up to 650 mm width and the KML-55 between 400-1000 mm width, both in 0.02-0.15 mm thickness.The KML-45 runs a Ø 45mm screw and the KML-55 a Ø 55mm screw, both at a 26:1 L/D ratio with 3-zone auto thermo control on the barrel. Driving motors are AC 20 HP for the KML-45 and AC 30 HP for the KML-55, both with inverter, and each die unit pairs with its own air ring for bubble cooling.Models: KML-45 / KML-55Suitable material: LDPE/LLDPEFilm thickness: 0.02-0.15 mm (both models)Film width range: 650 mm (KML-45) / 400-1000 mm (KML-55)Film output: 20-55 kgs/hr (KML-45) / 30-72 kgs/hr (KML-55)Screw diameter: Ø 45mm (KML-45) / Ø 55mm (KML-55), L/D ratio 26:1Driving motor: AC 20 HP + Inverter (KML-45) / AC 30 HP + Inverter (KML-55)Machine dimension: 470×165×400 cm (KML-45) / 500×220×450 cm (KML-55)

HDPE HIGH SPEED PLASTIC INFLATION MACHINE : KMH-35

Categories : Blown Film Extruders

The KMH-35 is a high-speed HDPE blown film extrusion line within PRM-Taiwan's plastic inflation machinery category, where HDPE resin is extruded and inflated into tubular film through a die and air ring before take-up and winding. The KMH-35 produces HDPE film in 0.008-0.10 mm thickness and up to 400 mm width, with output between 10-28 kgs/hr.The extruder uses a Ø 35 mm screw at a 26:1 L/D ratio, driven by an AC 15 HP motor with inverter and backed by 3-zone auto thermo control on the barrel. The die unit runs a Ø50/80 mm die with a Ø120 mm air ring, and the take-up section operates at speeds up to 85 m/min.Model: KMH-35Suitable material: HDPEFilm thickness: 0.008-0.10 mmFilm width range: 400 mmFilm output: 10-28 kgs/hrScrew diameter: Ø 35 mm, L/D ratio 26:1Driving motor: AC 15 HP + InverterMachine dimension: 350×260×310 cm

HDPE HIGH SPEED PLASTIC INFLATION MACHINE : KMH-65

Categories : Blown Film Extruders

The KMH-65 is a high-speed HDPE blown film extrusion line built for wide-format film production, used in applications such as plastic shopping bags. Within the plastic inflation machinery process, HDPE resin is extruded and inflated into tubular film through a die and air ring, then flattened and wound. The KMH-65 produces HDPE film in 0.008-0.10 mm thickness and up to 1300 mm width, with output between 20-80 kgs/hr.The extruder runs a Ø 65 mm screw at a 26:1 L/D ratio with 4-zone auto thermo control on the barrel, driven by an AC 50 HP motor with inverter. The die unit uses a Ø100/150 mm die paired with a Ø150/200 mm air ring, and the take-up section reaches speeds up to 75 m/min.Model: KMH-65Suitable material: HDPEFilm thickness: 0.008-0.10 mmFilm width range: 1300 mmFilm output: 20-80 kgs/hrScrew diameter: Ø 65 mm, L/D ratio 26:1Driving motor: AC 50 HP + InverterMachine dimension: 600×400×600 cm