Heavy Duty Granulators-GXC Series
Categories : Crushing, Shredding & Granulating Equipment
GXC Series Heavy Duty Granulators with power ratings of 55kw to 315kw are designed for high throughput processing. With a variety of rotor configurations available, these granulators have a wide range of applications including; hollow and voluminous materials (i.e. plastic drums, crates and chairs), flexible materials such as films, woven bags and rubber, tougher materials such as profiles, thick sheets, and other general plastics.
Tensionless Heavy-Duty Bottom Seal Bag Making Machine + Bag Folding System BFGFA
Categories : Plastic Bag Making Machines
Automatic Folding system - Servo-controlled 1st & 2nd fold individually (piece by piece), 3rd fold by pneumatic cyllinder every 1-15 pieces pile. 4th & 5th folds by optional.
PE HDPE 02 Regrind
Categories : PE Resin
Blue HDPE regrind — irregular crushed material, not pellet form.
PE HDPE 01
Categories : Recycled Plastic Granules
HDPE pellets, white (pearlescent), Taiwan origin. Send your requirement for a quotation.
Two Color HDPE High Speed Inflation Machine KMTC-40/45
Categories : Blown Film Extruders Lines
The KMTC-40/45 is a two-color high-speed plastic inflation machine for blown film extrusion of HDPE, combining two color lines into film with a width between 100-650 mm and thickness between 0.008-0.15 mm. Maximum output reaches 50 kg/hour, with the KMTC-40 running twin Ø40mm screws and the KMTC-45 running twin Ø45mm screws, both at a 26:1 L/D ratio and 6-zone auto thermo control. The die unit combines 24 lines through an Ø70mm die and Ø120mm air ring, and the take-up unit runs at speeds up to 85 m/min for both models. Models: KMTC-40 / KMTC-45 Suitable material: HDPE (two color combination, both) Film thickness: 0.008-0.15 mm (both) Film width range: KMTC-40 550 mm; KMTC-45 650 mm Film output: KMTC-40 15-45 kgs/hr; KMTC-45 20-50 kgs/hr Screw diameter/type: KMTC-40 Ø40mm x2; KMTC-45 Ø45mm x2 (L/D ratio 26:1 both) Die diameter: Ø70mm x 24 lines (both) Driving motor: KMTC-40 AC 15 HP x2 + Inverter; KMTC-45 AC 20 HP x2 + Inverter Take-up speed: 85 m/min (both)
HDPE Bottle/Container Washing System
Categories : Washing & Classifying Lines
The HDPE washing line is designed for rigid plastics with a wall thickness ranging from 1~25 mm such as HDPE bottle container, etc. Minimizing the recycling water flow rate and evaporation losses. The shredding system is with wear-resistant design to maximize the consistent running of the system and minimize operational costs. High-speed washing system with corresponding speed according to material type liberates contamination from plastic flakes. The underwater force-washing paddle of the washing tank maximize the washing efficiency. Mechanical and thermal drying systems minimize the moisture of the end product. Shredding, high-speed washing and drying is set at suitable intensity to avoid over friction and cause material loss (fines creation). System automation ensures that components actions are linked, the system capacity is maximized, and the system is protected against interfering material in the best way.
HDPE HIGH SPEED PLASTIC INFLATION MACHINE KMH-45/55
Categories : Blown Film Extruders Lines
The KMH-45/55 is an HDPE blown film extrusion line offered in two model variants for plastic shopping bag production. Within the plastic inflation machinery process, HDPE resin is extruded and inflated into tubular film before take-up and winding. The KMH-45 produces film up to 650 mm width and the KMH-55 up to 900 mm width, both in 0.008-0.10 mm thickness. The KMH-45 runs a Ø 45mm screw and the KMH-55 a Ø 55mm screw, both at a 26:1 L/D ratio with 3-zone auto thermo control on the barrel. Driving motors are AC 20 HP for the KMH-45 and AC 30 HP for the KMH-55, both with inverter, and each die unit pairs with its own air ring for bubble cooling. Models: KMH-45 / KMH-55 Suitable material: HDPE Film thickness: 0.008-0.10 mm (both models) Film width range: 650 mm (KMH-45) / 900 mm (KMH-55) Film output: 10-42 kgs/hr (KMH-45) / 20-60 kgs/hr (KMH-55) Screw diameter: Ø 45mm (KMH-45) / Ø 55mm (KMH-55), L/D ratio 26:1 Driving motor: AC 20 HP + Inverter (KMH-45) / AC 30 HP + Inverter (KMH-55) Machine dimension: 470×165×400 cm (KMH-45) / 500×200×400 cm (KMH-55)
HDPE HIGH SPEED PLASTIC INFLATION MACHINE : KMH-35
Categories : Blown Film Extruders Lines
The KMH-35 is a high-speed HDPE blown film extrusion line within PRM-Taiwan's plastic inflation machinery category, where HDPE resin is extruded and inflated into tubular film through a die and air ring before take-up and winding. The KMH-35 produces HDPE film in 0.008-0.10 mm thickness and up to 400 mm width, with output between 10-28 kgs/hr.The extruder uses a Ø 35 mm screw at a 26:1 L/D ratio, driven by an AC 15 HP motor with inverter and backed by 3-zone auto thermo control on the barrel. The die unit runs a Ø50/80 mm die with a Ø120 mm air ring, and the take-up section operates at speeds up to 85 m/min.Model: KMH-35Suitable material: HDPEFilm thickness: 0.008-0.10 mmFilm width range: 400 mmFilm output: 10-28 kgs/hrScrew diameter: Ø 35 mm, L/D ratio 26:1Driving motor: AC 15 HP + InverterMachine dimension: 350×260×310 cm
HDPE HIGH SPEED PLASTIC INFLATION MACHINE : KMH-65
Categories : Blown Film Extruders Lines
The KMH-65 is a high-speed HDPE blown film extrusion line built for wide-format film production, used in applications such as plastic shopping bags. Within the plastic inflation machinery process, HDPE resin is extruded and inflated into tubular film through a die and air ring, then flattened and wound. The KMH-65 produces HDPE film in 0.008-0.10 mm thickness and up to 1300 mm width, with output between 20-80 kgs/hr.The extruder runs a Ø 65 mm screw at a 26:1 L/D ratio with 4-zone auto thermo control on the barrel, driven by an AC 50 HP motor with inverter. The die unit uses a Ø100/150 mm die paired with a Ø150/200 mm air ring, and the take-up section reaches speeds up to 75 m/min.Model: KMH-65Suitable material: HDPEFilm thickness: 0.008-0.10 mmFilm width range: 1300 mmFilm output: 20-80 kgs/hrScrew diameter: Ø 65 mm, L/D ratio 26:1Driving motor: AC 50 HP + InverterMachine dimension: 600×400×600 cm
HDPE HIGH SPEED PLASTIC INFLATION MACHINE : KMH-MINI
Categories : Blown Film Extruders Lines
The KMH-MINI is a compact HDPE blown film extrusion line built for smaller-format inflation film production. Within PRM-Taiwan's plastic inflation machinery category, HDPE resin is extruded and inflated into tubular film through a die and air ring before take-up and winding. The KMH-MINI produces HDPE film in 0.008-0.10 mm thickness and up to 550 mm width, with output between 15-32 kgs/hr.The extruder uses a Ø 40mm screw at a 26:1 L/D ratio, driven by an AC 15 HP motor with inverter and backed by 3-zone auto thermo control on the barrel. The die unit runs a Ø60/80 mm die with a Ø120 mm air ring, and the take-up section operates at speeds up to 85 m/min.Model: KMH-MINISuitable material: HDPEFilm thickness: 0.008-0.10 mmFilm width range: 550 mmFilm output: 15-32 kgs/hrScrew diameter: Ø 40mm, L/D ratio 26:1Driving motor: AC 15 HP + InverterMachine dimension: 370×270×340 cm
HDPE High Speed Inflation Machine (GF-H45)
Categories : Blown Film Extruders Lines
The GF-H45 is a high-speed blown film line for HDPE (high density polyethylene), the material used for thin, crisp bags such as grocery and produce bags. It is one of five sizes in the GF-H series, which spans the GF-H35 to the GF-H65, and is specified for a maximum film width of 600 mm. The extruder carries a 45 mm screw with a 20 HP inverter-controlled motor, and the 70 mm die is matched with a dual-lip air ring and a 3HP inverter-controlled blower. Output is rated at 40 KG/HR. The take-up tower is a fixed type with a 700 mm roller width, and winding is on a single-station manual surface winder controlled from an independent switch board. Options cover an auto loader, manual screen changer, pressure gauge, die rotating unit, LDPE dies and air ring, corona treater, embossing unit, second-station winder and air shaft. Material: HDPE Max. film width: 600 mm Extruder: 45 mm screw, 20 HP motor with inverter Die: 70 mm with dual-lip air ring; blower 3HP with inverter Max. capacity: 40 KG/HR Take-up: tower fixed type, 700 mm roller width; single-station manual surface winder Options: auto loader, manual screen changer, die rotating unit, LDPE dies/air ring, corona treater, embossing unit, 2nd station winder