English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
Alu-Foil HSL Coating Machine (WAC Series)
Categories : Extrusion Coating Machines
WACL series is not just a convention dry laminating machine. The cold form foil is very much concerned proper & precise tension control to handle such thick laminates. In terms of tension control, this machine has mainly designed for Alu-alu foil multi-layers lamination. The arch dryer roller has synchronized with line speed, it’s very low friction and steady when film pass through the dryer. The internal drying chamber has safety LEL detection, this system can automatically discharge when detected high VOC occur during the production. This machine also combined heat seal lacquering coating function. Additional primer coating unit before lacquering unit, so it allows to apply two side (primer+heat seal) coating in one pass. The coating unit has alternative function with direct gravure and semi-flexo coating systems. Coating trolley along with self-pump system and able for quick job change. Specialty: -Trolley type coating unit can be equipped with either a gravure or semi-flexo coating system that is also easily cleaned -Primer & HSL coating units are in line for 2 side coating reducing production time -Individual drying chamber with removable high efficiency drying nozzle design
Stand-Up Pouch, Zipper Bag 3-Side-Seal Bag Making Machine-ABM-SPZ Series
Categories : Plastic Bag Making Machines
APPLICATION & MATERIALS: • Sealable laminated film, thickness 40-150μ.(80-150μ for Stand-up pouch and Zipper bag) • Four kinds of bags: 3-side-seal bag, stand-up pouch, 3-side-seal bag with zipper, and stand-up pouch with zipper. • 3-side sealed bags can be made in 3-lane operation within maximum parent-web width. • Stand-Up pouches and zipper bags can be made in 2-lane operation within maximum parent-web width.
Stand-Up Pouch, Zipper Bag 3-Side-Seal Bag Making Machine
Categories : Plastic Bag Making Machines
Sealable laminated film, thickness 40-150μ.(80-150μ for Stand-up pouch and Zipper bag) Four kinds of bags: 3-side-seal bag, stand-up pouch, 3-side-seal bag with zipper, and stand-up pouch with zipper. 3-side sealed bags can be made in 3-lane operation within maximum parent-web width. Stand-Up pouches and zipper bags can be made in 2-lane operation within maximum parent-web width.
Spout Inserting& Sealing Machine(Turret Table Type)
Categories : Sealing Machines
Application & Materials Sealable laminated bag with sealable spout Spout Position On bag open top or 45°, 60° of bag corner.
Slitting Machine－Kimera Series
Categories : Slitters and Rewinders
Materials LLDPE 40-150μ, PE; OPP; CPP; PVC; PET 30-150μ, BOPP 25-150μ, Laminated films 40-150μ. Unwinding Section Swing-out/Lift-up compatible type φ3" air shaft. Equipped with digital type line position control (LPC) to ensure accurate slitting position.
Computer Controlled High Speed Slitting Machine －Ultima Series
Categories : Slitters and Rewinders
Materials LLDPE or HDPE 40-150μ; PE, OPP, CPP or PVC 30-150μ; PET 12-150μ; BOPP 25-150μ; Metalised film 20-70μ; Laminated films 40-200μ; Paper 60-210gsm. Unwinding Section Unwinding-stand with shaftless hydraulic loading clamps. Equipped with digital type line position control (LPC) to ensure accurate slitting position. Slitting Section Equipped with razor cutter. Equipped with blower, expulsion tube. Rewinding Section Horizontal moveable rewinding stand. Static eliminating device. Pneumatic control for lay-on roller provides steadier rewinding tension. Rewind stand with open arm system makes unloading easier. Equipped with ball type friction rings, which not only can raise the concentricity of the paper cores and finish rolls, but also can make unloading easier without causing paper dust. Individual tension detectors for two rewinding sections provide accurate and steady tension control. Equipped with taper tension control, providing superior rewind-tension for thin films whose thickness are under 15μ.
Shaftless Type, Multi-Winding-Stands, High Speed Slitting Machine－Supra Series
Categories : Slitters and Rewinders
Materials PVC, OPP, PET, CPP, Shrinkable PP Film, Paper. Silicon Coated Paper, Metalized Paper, Self-adhesive Paper, Aluminum Foil + Paper, NCR Paper, Non-woven Cloth. Laminate flims (Toothpaste Multi-layer packing Material and others.) Rewinding Type Center rewinding with multi shaftless rewind stands. Unwinding Section Unwind-stand with shaftless hydraulic loading clamps. (Hydraulic up/down, left/ right moving). Equipped with edge position control (EPC) to ensure accurate slitting position. Equipped with pneumatic brake as well as electro/pneumatic converter for wide range tension control. Slitting Section Shear knife cutting or razor blade cutting in the air or groove is available according to material characteristics. Equipped with blower and expulsion tube. Rewinding Section Equipped with shaftless rewinding stands, heavy finishing rolls can be directly unload to the trolley. Easy for one-man operation. Static eliminating device equipped. Equipped with banana roller for film expanding.
Small Roll Rewinding/Inspecting Machine - REF-R Series
Categories : Slitters and Rewinders
Applicable Materials: Inspect the defectives of the printed film and laminate.
Narrow Width Slitting Machine－Nera Series
Categories : Slitters and Rewinders
Materials Laminated films 40-150μ; OPP 30-150μ; CPP 30-150μ; PVC (Soft), 30-150μ; PET 30-80μ. Rewinding Type Diff erential center rewinding with duplex rewind shafts. Unwinding Section Shaft less unwinding stand (Motorised left / right movement) with mechanical chuck. Equipped with digital type line position control (LPC) to ensure accurate slitting position. Slitting Section Equipped with razor cutter and cutting in the air. Equipped with grooved roller for razor blades. Equipped with blower and expulsion tube. Rewinding Section Cantilevered type mechanical rewinding shafts for easy operation. Equipped with ball type friction rings, which not only can facilitate the concentricity of the paper cores and finish rolls, but also can make unloading easier without causing paper dust. Equipped with automatic tension controlling system and load-cells. The actual tension is digitally displayed, increasing the tension control precision with minimal operation e ffort. Static eliminated brush equipped. Lay-on roller pneumatic pressure control system. Unloading device.
Inspecting / Rewinding Machine-REF-R Series
Categories : Slitters and Rewinders
Application Materials: Inspect the defectives of the printed film and laminate.
Embossing Machine - REF-B150 Series
Categories : Embossing Machines
Application and Materials: Paper laminate, Metalized Paper, Aluminum Foil + Paper
Single-Web Stand-Up Pouch, Zipper Bag, Automatic Fold and 3-Side-Seal Bag Making Machine-AFM-SPZ Series
Categories : Plastic Bag Making Machines
Materials Thickness in 40-150 $\mu$, heat-sealable laminated materials or other multi-layer materials. (When producing stand-up pouches / doypacks, the material thickness should be 80-150 $\mu$). Main Power The main power AC servo motor with driver provides precise heat-sealing time control, suitable for isochronous heat-sealing control systems. Feeding Motor Equipped with two sets of feeding servo motors, which can greatly increase machine speed and make bag-making length more precise. Unwinding Section Horizontal unwinding mechanism equipped with cantilever/movable mechanical shaft with 3” adapters, making loading and unloading easier and more convenient. Equipped with roll diameter calculation-based automatic tension controller, providing continuous and stable unwinding tension control. Equipped with full-automatic edge/line position controller (LPC) to make heat-sealing and trimming match the material printing position. Newly improved dancer roller provides more stable tension before materials enter the heat-sealing station. Gusset tucking device allows adjustment of gusset depth and features pre-forming function to prevent material wandering and make the heat-sealing position more precise. Bag-Making Section AFM-73SZ can manufacture four different types of bags: 3-side seal bags, bottom-gussetless stand-up pouches, 3-side seal zipper bags, and bottom-gussetless stand-up zipper pouches. When manufacturing 3-side seal bags, 3-lane production can be performed within the maximum raw material width range. When manufacturing zipper bags, bottom-gussetless stand-up pouches, and folded bags, 1-lane production can be performed within the maximum raw material width range. Equipped with ultrasonic sealer to flatten the zipper edge-sealing portion, making the seal more aesthetic and smooth, and preventing leakage issues. Equipped with double-length bag control system to extend the maximum bag length range when producing 3-side seal bags (maximum multiplier: 9 times). Equipped with automatic heat-sealing station lifting device upon machine stop to prevent overheating during shutdowns. Equipped with adjustable K-type heat-sealing mold, suitable for larger-sized stand-up pouches. Safety cutter design provides operators with enhanced safety protection. Machine Maintenance Uses capped bearings which require no lubrication, extending component service life while simplifying maintenance work. Computer control system, touch screen control, and triple servo control system. Can control isochronous heat-sealing time, significantly reducing material waste during trial runs. Heat-sealing temperature settings do not need to be changed when adjusting machine speed. Equipped with a touch screen for easier and smoother operation. Built-in heat-sealing temperature controller allows direct setting on the touch screen for convenient and precise control. Can choose between automatic alarm / automatic stop operation modes when machine errors occur. Alarm messages are automatically displayed on the screen. Built-in database can store 100 sets of job parameters. Operation and maintenance procedures are also stored in the computer control system and can be consulted at any time.