English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
Ultrasonic Metal Welding Machine KWG2620-EW
Categories : Welding & Surface Treatment Equipment
Ultrasonic metal welding, generally for the fusion of low melting point metal materials such as copper, aluminum, etc. Taking the ultrasonic welding metal plate as an example, the two metal plates are overlapped and placed on the base, and the ultrasonic welding head is pressed against the coincident metal plate with appropriate pressure, and a lateral vibration of 20,000 to 40,000 times per second is applied. The two metal plate joints are subjected to high frequency vibration friction and welded. In this welding mode, the solvent is not required, and the welding portion does not need to pass current and heat, and is close to the cold joint, and the intermetallic compound is less likely to occur, and the structure changes little. The welding feature is that the deformation of the joint is less, the material is not melted, and the thermal influence of the material is not significantly changed. The fragile cast structure or the intermetallic compound can be obtained, and the fusion of the foil and the small joint can be achieved without strong resistance welding. Long foil can be applied by roller type continuous welding. KWG0935 model can be applied to lithium battery copper aluminum foil and aluminum nickel sheet welding, copper aluminum foil spot welding, capacitor copper aluminum foil spot welding, etc. KWG2020 model can be applied to lithium battery aluminum shell and aluminum nickel sheet welding, wire and terminal welding, wire butt welding, wire and metal plate welding, metal plate spot welding, etc........
Ultrasonic Metal Welding Machine KWG2620-E
Categories : Welding & Surface Treatment Equipment
Ultrasonic metal welding, generally for the fusion of low melting point metal materials such as copper, aluminum, etc. Taking the ultrasonic welding metal plate as an example, the two metal plates are overlapped and placed on the base, and the ultrasonic welding head is pressed against the coincident metal plate with appropriate pressure, and a lateral vibration of 20,000 to 40,000 times per second is applied. The two metal plate joints are subjected to high frequency vibration friction and welded. In this welding mode, the solvent is not required, and the welding portion does not need to pass current and heat, and is close to the cold joint, and the intermetallic compound is less likely to occur, and the structure changes little. The welding feature is that the deformation of the joint is less, the material is not melted, and the thermal influence of the material is not significantly changed. The fragile cast structure or the intermetallic compound can be obtained, and the fusion of the foil and the small joint can be achieved without strong resistance welding. Long foil can be applied by roller type continuous welding. KWG0935 model can be applied to lithium battery copper aluminum foil and aluminum nickel sheet welding, copper aluminum foil spot welding, capacitor copper aluminum foil spot welding, etc. KWG2020 model can be applied to lithium battery aluminum shell and aluminum nickel sheet welding, wire and terminal welding, wire butt welding, wire and metal plate welding, metal plate spot welding, etc........
Ultrasonic Metal Welding Machine KWG0930-E
Categories : Welding & Surface Treatment Equipment
Ultrasonic metal welding, generally for the fusion of low melting point metal materials such as copper, aluminum, etc. Taking the ultrasonic welding metal plate as an example, the two metal plates are overlapped and placed on the base, and the ultrasonic welding head is pressed against the coincident metal plate with appropriate pressure, and a lateral vibration of 20,000 to 40,000 times per second is applied. The two metal plate joints are subjected to high frequency vibration friction and welded. In this welding mode, the solvent is not required, and the welding portion does not need to pass current and heat, and is close to the cold joint, and the intermetallic compound is less likely to occur, and the structure changes little. The welding feature is that the deformation of the joint is less, the material is not melted, and the thermal influence of the material is not significantly changed. The fragile cast structure or the intermetallic compound can be obtained, and the fusion of the foil and the small joint can be achieved without strong resistance welding. Long foil can be applied by roller type continuous welding. KWG0935 model can be applied to lithium battery copper aluminum foil and aluminum nickel sheet welding, copper aluminum foil spot welding, capacitor copper aluminum foil spot welding, etc. KWG2020 model can be applied to lithium battery aluminum shell and aluminum nickel sheet welding, wire and terminal welding, wire butt welding, wire and metal plate welding, metal plate spot welding, etc........
ULTRASONIC CLEANING MACHINE BOX TYPE ULTRASONIC CLEANING MACHINE
Categories : Cleaning Equipment
Overview and characteristics of ultrasonic cleaning machine ※ Ultrasonic cleaning is widely used, such as electrical appliances, electronics, automobiles, industrial machinery, etc.; optical lens degreasing, removal of surface attachments and cleaning parts, using a powerful ultrasonic cleaning machine with the cleaning Engineering to improve the production efficiency and the cleaning quality and working environment by using single-slot, multi-slot, and automatic methods.
ULTRASONIC CLEANING MACHINE SINGLE TANK ULTRASONIC CLEANING MACHINE
Categories : Cleaning Equipment
Overview and characteristics of ultrasonic cleaning machine ※ Ultrasonic cleaning is widely used, such as electrical appliances, electronics, automobiles, industrial machinery, etc.; optical lens degreasing, removal of surface attachments and cleaning parts, using a powerful ultrasonic cleaning machine with the cleaning Engineering to improve the production efficiency and the cleaning quality and working environment by using single-slot, multi-slot, and automatic methods.
U-Cup
Categories : Rubber Products & Parts
U-Cups (U-rings) are versatile lip seals, named after their characteristic "U"-shaped cross-section. They are specifically engineered for reciprocating applications and serve as primary seals in hydraulic and pneumatic cylinders. Key Performance Benefits Pressure-Energized Sealing: The U-shape enables the sealing lips to expand against the hardware surface under system pressure. As the pressure increases, the sealing force proportionally grows, ensuring a reliable seal. Dual-Purpose Design: U-Cups function effectively as Rod Seals (preventing external leakage) and Piston Seals (preventing internal bypass between cylinder chambers). Optimized Friction: The lip geometry provides a secure seal with minimal contact area, reducing heat generation and mechanical wear during operation. Synergy with Back-up Rings High-Pressure Integrity: For systems operating above 5 MPa (50 bar), pairing a U-Cup with a back-up ring is essential to prevent material extrusion into clearance gaps. Structural Support: The back-up ring stabilizes the U-Cup in dynamic applications, particularly when large extrusion gaps or high-speed cycles are present. Common Industry Materials Polyurethane (PU): Offers superior abrasion resistance and high shear strength, ideal for heavy-duty hydraulic systems. Nitrile (NBR): Standard choice for pneumatic cylinders and lower-pressure environments. PTFE / POM: Often used for back-up rings to provide high-hardness support.
All-Electric Two-Component Injection Molding Machine (CT-R series)
Categories : Electrical Injection Molding Machines
It is All-Electric Two-Component injection molding equipment. It is suitable for two-component and multi-component products, including electronic parts, medical appliance, cosmetic containers, etc.
Large Horizontal Rotary Table Two-Component Injection Molding Machine (HB-R Series)
Categories : Horizontal Injection Molding Machines
It is a large injection molding machine, which is suitable for large-scale home appliances and panels, automotive skylights, lights,
TWO LAYER HDPE/LDPE/ LLDPE HIGH SPEED PLASTIC INFLATION MACHINE : KMTL-65
Categories : Blown Film Extruders Lines
The KMTL-65 is a two-layer HDPE/LDPE/LLDPE high-speed plastic inflation (blown film extrusion) machine, producing two-layer PE film at widths up to 2,000 mm for applications such as car film and food plastic wrap. The extruder uses a Ø 65mm x 2 screw with a 28:1 L/D ratio and a 50 HP AC driving motor with inverter. The die unit is fitted with a Ø500 mm die and Ø550 mm air ring. Film thickness ranges from 0.03 to 0.15 mm, output reaches 60-250 kgs/hr, and the take-up unit runs at speeds up to 40 m/min. Model: KMTL-65 Suitable material: HDPE/LDPE/LLDPE Film thickness: 0.03-0.15 mm Film width range: 2000 mm Film output: 60-250 kgs/hr Screw diameter/type: Ø 65mm x 2, L/D ratio 28:1 Driving motor: AC 50 HP + Inverter Die diameter: Ø500 mm / Air ring diameter: Ø550 mm Take-up speed: 40 m/min
TWO LAYER HDPE/LDPE/ LLDPE HIGH SPEED PLASTIC INFLATION MACHINE : KMTL-55
Categories : Blown Film Extruders Lines
The KMTL-55 is a two-layer HDPE/LDPE/LLDPE high-speed plastic inflation (blown film extrusion) machine, producing two-layer PE film at widths up to 1,400 mm for applications such as car film and food plastic wrap. The extruder is built around a Ø 55mm x 2 screw with a 28:1 L/D ratio and a 30 HP AC driving motor with inverter. The die unit uses a Ø350 mm die and Ø400 mm air ring. Film thickness ranges from 0.025 to 0.15 mm, output reaches 20-150 kgs/hr, and the take-up unit runs at speeds up to 45 m/min. Model: KMTL-55 Suitable material: HDPE/LDPE/LLDPE Film thickness: 0.025-0.15 mm Film width range: 1400 mm Film output: 20-150 kgs/hr Screw diameter/type: Ø 55mm x 2, L/D ratio 28:1 Driving motor: AC 30 HP + Inverter Die diameter: Ø350 mm / Air ring diameter: Ø400 mm Machine dimension: 500x500x800 cm
TWO LAYER HDPE/LDPE/ LLDPE HIGH SPEED PLASTIC INFLATION MACHINE : KMTL-40/45
Categories : Blown Film Extruders Lines
The KMTL-40/45 is a two-layer high-speed plastic inflation machine for blown film extrusion of HDPE, LDPE, and LLDPE resins, producing 2-layer PE film up to 800 mm (KMTL-40) or 900 mm (KMTL-45) wide for applications such as car film and food plastic wrap. The KMTL-40 runs twin Ø40mm screws with a 20 HP AC driving motor and 6-zone auto thermo control, producing film at 15-70 kgs/hr; the KMTL-45 runs twin Ø45mm screws with the same 20 HP AC driving motor and 2-zone auto thermo control, producing film at 20-90 kgs/hr. Both models operate at a 26:1 L/D ratio and a take-up speed of 70 m/min. Models: KMTL-40 / KMTL-45 Suitable material: HDPE/LDPE/LLDPE (both) Film thickness: 0.010-0.15 mm (both) Film width range: KMTL-40 800 mm; KMTL-45 900 mm Film output: KMTL-40 15-70 kgs/hr; KMTL-45 20-90 kgs/hr Screw diameter/type: KMTL-40 Ø40mm x2; KMTL-45 Ø45mm x2 (L/D ratio 26:1 both) Driving motor: AC 20 HP + Inverter (both) Take-up speed: 70 m/min (both) Machine dimension: KMTL-40 450×200×400 cm; KMTL-45 470×220×450 cm
Co-rotating Twin Screw Underwater Pelletizing Compounding Line | CK-HT
Categories : Recycled Plastic Pelletizing Lines
CK-HT series Co-rotating Twin Screw Underwater Pelletizing Compounding Extrusion Line is designed especially for compounding materials with high viscosity, low MI, or difficulty to be shaped. The extrusion line can be applied to a wide range of materials and applications. Possible materials: TPU, TPE, TPV, TPR, PP, PS, PLA, PVA, SEBS, EVA, Rubber, Hot-melt adhesive, Special resin, and Micro pellet, etc.
