Search

Plastic Coating Machine DYC-ESP

Categories :

YD Vertical Four-Column/Two-Color Rotary Table-Vertical Clamping and Vertical Injection Molding Machines

Categories : Vertical Injection Molding Machines

A. Standard double injection Vertical 4-columns direct-pressure clamping. In the upper mold plate, two separate vertical injection units is installed(separate injection hydraulic oil route) with the addition of round disc for this double injection machine. - Clamping force is 90- 500TON. Computerized and exclusively configured hydraulic system is used, which is more suitable for the production of general products( or special double-material) injection molding. - Two molds are installed on the upper mold plate while three lower molds are installed on the disc. When molding, the disc rotates alternatively at 120°to complete the two-color (two-material) injection molding or overmolding. - Highly efficient disc with water jacket device in the middle for cooling of the lower mold. - Expandable computer programs and special multistation disc (i.e. two upper molds and four lower molds). In the two lower modes, automated embedding and removing devices can be installed optionally to achieve automation of the whole machine work and increase production efficiency. B. Other double injection machine: - Type 1: A set of independent vertical “injection units” is added onto the upper mold plate of the original injection machine to form a double injection machine. Example: YH / YR / YC models + vertical injection. - Type 2: On the original injection machine, one or more sets of independent horizontal (level) injection units is combined to form a double injection machine. - Example: YH / YR models + horizontal injection - Type 3: The two-colors injection molding machine is combined to form a double injection machine by sharing a common disc. - Example: a. YH model + YT model + disc (2 ~ 4 stations) b. YH model + YH model + disc (2 ~ 4 stations)

FAC Air-Cooled Chillers

Categories : Cooling Equipment / Industrial Chillers

The air-cooled chiller is mainly composed of compressor, condenser, filter, expansion valve, evaporator, air filter, blower. The liquid refrigerant enters the evaporator after being throttled by the expansion valve, where it evaporates and absorbs the heat of the cooled air, then inhaled by the compressor via the return pipe, superheated steam that is compressed to become high temperature and high pressure , cooled by outdoor air after entering the condenser, then delivered to the expansion valve through a dry filter, going to the next cycle. This continuous cycle will cool the room and maintain the proper air conditioning temperature.

Heat Transfer Film for Glass Materials

Categories : Flexible Packaging & Films

Various Plastic Products, CD Barrel, Container、Metal Outer case、House Ware、Stationer, Gift etc. Adopting Heat transfer film on the glass is absuletly applicable, although the appopriate surface treatment is needed, beforing the printing work be processed. Heat transfer film or thermal film will be perfect solution for PP printingTransfer printed film has many function which direct printing doesn’t have. Using transfer printed film and transfer printed machine transfer the elegant design to product to make product becoming high value merchandise. It can enhance quality, decrease cost, and increase profit.

foxnum

Categories : Electrical Injection Molding Machines

foxnum

All Electric Machine With SPARK Series

Categories : Automatic Injection Molding Machine

Features: Combining ultra-thin high speed and ultra-thick low speed Revolution round template design with Japanese super rigid frame Super high-speed intelligent computer controller With Japanese screw design, excellent performance All-electric machine vs. Hydraulic machine More environmentally friendly → Reduce the configuration of cooling water circulation system More energy saving → No need high-watt electric source. More environmental cleanness → No oil leakage concern and no hydraulic oil consumption. More quiet → No high speed sound driven by oil pump. Easier to execute the machine compounding action → difficult for hydraulic machines. More sensitive for mold low pressure protection → avoid damage to mold.

Conversion line (Gusseting-Cutting-Sewing)

Categories : Cutting Machines

The new generation of woven sack conversion line for bottom-sewn sacks is suitable for coated and uncoated woven fabric, and BOPP film laminated fabric. With great variety of options, a wide possibility of applications is brought for the customer.

AC Induction Servo Motor: SB Series

Categories : Indicators and Sensors

Frame size: F#180. Insulation:IP54 Low inertia design which could meet high precision motion control requirement by using servo drive system or closed-loop vector control inverter.

HIGH-SPEED TWO-HEAD MONO-LAYER BLOWN FILM MACHINE

Categories : Blown Film Extruders

This two-head blown film machine line can produce 2 film rolls of the same width at the same time, and the production capacity is thus comparatively higher than models with only one die head. Thanks to the twin-head design, it not only occupies less space but also consumes less energy, which offers an economical solution for producing plastic bags of smaller width.

VALVE GATE-AVMT

Categories : Runner Systems

Suitable for large-scale parts or complex shape parts. There is a pin in the nozzle and drive by pneumatic or hydraulic to open or close the nozzle gate. When the valve pin open / close can control the melt filling. Especially for the big gate design, the valve pin will seal the gate after packing process to prevent the stringing and get the unapparent gate mark. For the multi-gate mold design, using the sequence control can eliminate the weld line problem.

Inline Coating & Lamination Application-The coating & lamination with maximum efficiency

Categories : Industrial Lamination

Inline Coating & Lamination Application (The coating & lamination with maximum efficiency) The main concept of inline coating application is to simplify the complete production process by integrating the printing press with the coating and lamination application unit. The inline coating units can include Reverse Gravure or Direct Gravure / Flexo Coating or Semi-Flexo Coating / Waxer or Hotmelt (Coating/Lamination). It can save unnecessary wastage during the production and increase production efficiency. If you are looking for suitable inline coating or lamination integration, this is the unit for you to customize. KYMC

AUTOMATIC TYPE SEALING MACHINE-ET-66

Categories : Sealing Machines

1. PLC with Index Gear Conveyor, Inverter Speed Control and Touch Screen Operation. 2. Stainless Steel frame and Anodized Aluminum.