Search

Fully Automatic PE Stretch / Cling Film Rewinding Machine - RWA-Series

Categories : Slitters and Rewinders

Designed to rewind small rolls from jumbo rolls RW-1 for rewinding fixed width film 300mm, fully automatic feed paper core, rewind, cut & change paper core. RW-2 for rewinding width film 200-550mm, manual feed paper core, cut & change paper core RW-3 for rewinding fixed width film 500mm, fully automatic feed paper core, rewind, cut & change paper core RWA for rewinding width film 300-530mm, fully automatic feed paper core, rewind, cut & change paper core.

High-Speed Thin-Wall Injection Molding Machine (SA-h Series)

Categories : Toggle Clamping Injection Molding Machines

It is a newly-released servo hydraulic energy-saving model with outward toggle clamping unit, especially suitable for producing thin-walled products. With clamping force ranging from 170 tons to 600 tons.

Taper Screw Batch Pre-former

Categories : Rubber Mixing & Pre-Processing Equipment

FUNCTION: This uniquely designed Taper Twin Screw Extruder has a large volume open top hopper, which will accept a whole batch from your mixer without performing. The twin screws continuously and automatically bite and feed the compound, which then is extruded through a die. This simple but effective feeder, allows you to eliminate many labor intensive material handing processes, between your mixer and existing conventional extruders or other equipments.. BENEFITS: Large volume hopper capacity Exceptional cooling and temperature control Full and easy access for cleaning Simple, automatic and continuous operation Easy maintenance Cost effective and affordable

Chiller

Categories : Cooling & Heating Equipment

Extruder heading machine printing machine capping machine sealing machine accessories

EXTRUSION GEAR PUMP

Categories : Transmission, Motors & Drive Systems and Gears

Micro Dehumidifying Dryer (DHM-SL )

Categories : Dryers and Dehumidifiers

The latest micro dehumidifying dryer uses compressed air to dry the plastic resin. The air volume generated by the air compressor is suitable for the production of small parts, such as electronics parts. The perfect grade of dryness coupled with a moderate amount of drying air, the production efficiency greatly increased. Air compressor process the air via water filtration, and the air will be compressed between pressure 5~7kg/cm² . The compressed air will then go through the molecular sieve and supply the dry air with dew point up to -40 ~ -50 ℃. During the molding process, it will fully demonstrate the perfect plastic properties. In accordance with the different types of plastic, the drying time required is also slightly different, for 2 to 6 hours. The multi-function design can dry, dehumidify, and automatically convey resins. Comparing to the regular dehumidifying dryer, it can save space and directly connect to the inlet of molding machine. It can directly convey the drying resins to production to prevent resurgence and to ensure the production complete. 1. Display the dew point detection 2. Insufficient air pressure detection 3. Built-in positive pressure conveying system 4. Overheat preventer 5. Weekly timer 6. Install high-density filter 7. With Industry 4.0 features, Ethernet and RS485 can be used to connect with other brands. 8. The controller and main body can be separated or combined to facilitate for space arrangements.

Ultrasonic Metal Welding Machine KWG2620-E

Categories : Welding & Surface Treatment Equipment

Ultrasonic metal welding, generally for the fusion of low melting point metal materials such as copper, aluminum, etc. Taking the ultrasonic welding metal plate as an example, the two metal plates are overlapped and placed on the base, and the ultrasonic welding head is pressed against the coincident metal plate with appropriate pressure, and a lateral vibration of 20,000 to 40,000 times per second is applied. The two metal plate joints are subjected to high frequency vibration friction and welded. In this welding mode, the solvent is not required, and the welding portion does not need to pass current and heat, and is close to the cold joint, and the intermetallic compound is less likely to occur, and the structure changes little. The welding feature is that the deformation of the joint is less, the material is not melted, and the thermal influence of the material is not significantly changed. The fragile cast structure or the intermetallic compound can be obtained, and the fusion of the foil and the small joint can be achieved without strong resistance welding. Long foil can be applied by roller type continuous welding. KWG0935 model can be applied to lithium battery copper aluminum foil and aluminum nickel sheet welding, copper aluminum foil spot welding, capacitor copper aluminum foil spot welding, etc. KWG2020 model can be applied to lithium battery aluminum shell and aluminum nickel sheet welding, wire and terminal welding, wire butt welding, wire and metal plate welding, metal plate spot welding, etc........

P.P. HIGH SPEED PLASTIC INFLATION MACHINE : KPP-65/75

Categories : Blown Film Extruders Lines

The KPP-65/75 is a high-speed P.P. plastic inflation (blown film extrusion) machine available in two widths — 650 mm (KPP-65) and 900 mm (KPP-75) — for applications such as plastic garment bags. The KPP-65 runs a Ø 65 mm screw (28:1 L/D ratio) with a 30 HP AC driving motor, a Ø300 mm die, and a Ø450 mm air ring; the KPP-75 runs a Ø 75 mm screw with a 40 HP AC driving motor, a Ø450 mm die, and a Ø700 mm air ring. Film thickness is 0.025-0.10 mm for both, with output of 28-60 kgs/hr (KPP-65) and 30-70 kgs/hr (KPP-75). Model: KPP-65 / KPP-75 Suitable material: P.P. Film thickness: 0.025-0.10 mm Film width range: 650 mm (KPP-65) / 900 mm (KPP-75) Film output: 28-60 kgs/hr (KPP-65) / 30-70 kgs/hr (KPP-75) Screw diameter/type: Ø 65 mm / Ø 75 mm, L/D ratio 28:1 Driving motor: AC 30 HP (KPP-65) / AC 40 HP (KPP-75) + Inverter Machine dimension: 500x200x400 cm (KPP-65) / 730x450x470 cm (KPP-75)

Three-Layer ABA Co-Extrusion Blown Film Machine

Categories : Blown Film Extruders Lines

KS-MH55+85 ABA 100% Recycled Material ABA Blown Film Solution for Agricultural Mulch Film The KS-MH55+85 ABA Three-Layer Co-Extrusion Blown Film Machine is a high-efficiency ABA blown film line developed by KUNG HSING Plastic Machinery specifically for agricultural mulch film applications.Designed to process 100% recycled LD and LLDPE materials, this system utilizes an ABA layer structure to maximize recycled material usage while maintaining stable film formation, mechanical strength, and reliable winding performance under wide-width and thick-gauge production conditions.

Fully Automatic Bottom Seal Bag Making Machine with Hot Slitting System-SE-40S/50S

Categories : Plastic Bag Making Machines

Computer control over the entire process From film roll to final product, one process flow Servo motor, as standard attachment, makes it easy to adjust the bag length and production speed Automatically stop when running out of film / film feeding blocks or jam / scanning error

Co-Extrusion Air Bubble Wrap Machine

Categories : Sealing Machines

- Plastic converting machines - Bag making machine by application

Dynisco Echo™ Melt Pressure Sensors

Categories : Sensing, Monitoring & Inspection Equipment

Trusted for quality, reliability, and accurate performance at an affordable price, Echo melt pressure sensors are the perfect choice for less demanding applications. With stainless-steel wetted parts, accuracy to within 0.5% and 1.5M to 10M psi pressure range capability, Echo sensors offer performance features other economically priced sensors can’t match.