Search - screen changer

FILM/BAGS WASTE PLASTIC RECYCLING MACHINE: KCR-65

Categories : Recycling Lines by Application

The KCR-65 is a film/bag waste plastic recycling machine that crushes and reprocesses HDPE, LDPE, and LLDPE film or bags, converting the waste into pellets at an output of 35-50 kgs / hr.A 15 HP crusher and 2 HP spiral-type hopper feeding device convey the material into a single-degasification Ø 65 mm screw with a 24:1 L/D ratio, heated at 13.5 kw across 3 auto thermo zones and driven by an AC 20 hp inverter motor. The melt passes through a spaghetti-type die (3.5 kw heater, 1 zone) with a manual screen changer, then a water-cooling system and a pellet cutter with a 1 HP cutting machine motor and 3 HP cutter motor.Model: KCR-65Suitable material: HDPE/LDPE/LLDPEOutput: 35-50 kgs / hrCrusher: 15 HPScrew diameter: Ø 65 mm, L/D ratio 24:1Heating capacity: 13.5 kw, 3 zoneDriving motor: AC 20 hp + InverterDie type: Spaghetti TypeCooling system: Water Cooling

Automatic self-cleaning screen changer - ​​​​​​​RAS

Categories : Recycling Lines by Application

Any contamination the filter collects is scraped from its surface by two blades, and then gathered by the blade-holder. Finally, anything harvested is automatically ejected through the front valve. Another important feature is the possibility to determine a pressure set-point (in pressure mode) with nothing more than a few taps on the touch screen, so that once such level is reached the blade holder (running at adjustable speed) will proceed to gather the contamination, opening the front valve only on a full cycle. In the event of a particularly contaminated input material, the filter cant be set to work in continuous mode: the blade holder will keep on scraping, while relying on temporized valve openings to discharge as needed. FIMIC- Screen changers Filters Filter Recycle filter Recycle filters Recycling Filter

RAS UP 800

Categories : Recycling Lines by Application

FIMIC’s latest innovations are aimed to address the current challenges in the plastics recycling industry. RAS 800 is the new addition to the automatic self-cleaning melt filters models produced by FIMIC, its increased filtration surface (4775cm2) allows recyclers to reach a higher hourly production capacity with the efficiency and simplicity characteristic of FIMIC’s filtration technology.

Automatic Melt Filter - RAS+REF

Categories : Pelletizing & Compounding Lines

The melt filter that made FIMIC technology renowned in the recycling field, enhanced with the possibility to work in backflush. RAS+REF melt filters can in fact operate in two different ways: in scraping mode or in backflush mode, providing more options to anyone wishing to process materials with mesh filters. REF therefore represents an ideal option for mesh processing with exceptional final results. FIMIC - Screen changers Filters Filter Recycle filter Recycle filters Recycling Filter

EXCLUSIVE MELT FILTER- GEM

Categories : Pelletizing & Compounding Lines

Differently from RAS, this model reaches a greater filtering surface due to the presence of two filtering meshes towards which all the melt is directed, alongside two scrapers and independent discharge valves. The two blades scrape the contamination the filter collects, while the blade holder rakes it in to automatically eject it through the valve. The pressure mode can be set from the touch screen, while the blade holder rotating speed is adjustable and the valve only opens on a full cycle. In the event of a higher degree of contamination, a continuous mode is available to let the blade holder scrape continuously. In this case, a temporizer will tell the valve when to discharge. FIMIC- Screen changers Filters Filter Recycle filter Recycle filters Recycling Filter

Automatic DOUBLE FILTER- ERA

Categories : Pelletizing & Compounding Lines

ERA is made of two internal filtration chambers and two independent discharge valves, thus enabling to setup a pre-filtration on the first step and a finer one in the second, all in the same machine! This means, in short, the possibility of using cheap punched screens (400-2000 micron) to protect the expensive laser screens (100-300 micron) coming afterwards. The resulting cost reduction is undeniable, both on the financial and energetic side. FIMIC screen changers Filters Filter Recycle filter Recycle filters Recycling Filter

AUTOMATIC MELT FILTER- TEN

Categories : Pelletizing & Compounding Lines

TEN is FIMIC’s automatic screen changer capable of blocking even the smallest contamination particles thanks to its mesh, whose resistance allows to adapt the temperature according to the requirements and the material to be processed. The adjustable opening on the mesh output is a further guarantee of the quality of the end product. A small scraper close to the mesh harvests most waste and prevents it from breaking when it is changed. Its 1.465 cm2 filtering surface has a low load pressure; it therefore excludes any danger of degradation. It is also possible to adjust the mesh changing speed, setting a target pressure at which it will be automatically switched, to fit all the workflow to the material to be filtered. Furthermore, when changed the mesh is held by the material pressure itself and doesn’t needany other auxiliary systems. The mesh proper is available in varying filtration levels, starting from 80 micron / 170 mesh. TEN can also be adapted to finer filtration levels equipping custom made meshes. Quick opening is also always guaranteed. There’s no need for dedicated tools or skills, for FIMIC provides a pneumatic screwdriver at the time of purchase. FIMIC - Screen changers Filters Filter Recycle filter Recycle filters Recycling Filter

Die Plate or Adaptor

Categories : Machine-Specific Spare Parts

P.P. Film Inflation Machine (GF-P65)

Categories : Blown Film Extruders

The GF-P65 is a P.P. (polypropylene) tubular film inflation machine, a blown film line adapted for polypropylene, which needs a sizing and cooling arrangement different from polyethylene film. It is one of four sizes in the GF-P series, from the GF-P45 to the GF-P75, and is specified for a maximum film width of 800 mm with a 65 mm extruder driven by a 30 HP motor with inverter, a 350 mm die with a single lip air ring, a 2 HP inverter-controlled blower, 5 PCES of sizing ring and a hot air type drying system. Maximum capacity is 80 kg/hr. Control is from an independent switch board and the roller width is 900 mm. Options include an auto loader, hopper dryer, manual screen changer, pressure gauge, die rotating unit, corona treater, static eliminator, 4-spindle winder, air shaft and water chiller, so the machine can be built up for printed or multi-roll production of PP tubular film. Type: P.P. tubular film inflation machine Material: P.P. (Polypropylene) Max. film width: 800 mm Extruder: 65 mm, 30 HP motor with inverter Die: 350 mm with single lip air ring; blower 2 HP with inverter; sizing ring 5 PCES; hot air type drying system Max. capacity: 80 kg/hr; roller width 900 mm Options: auto loader, hopper dryer, manual screen changer, die rotating unit, corona treater, static eliminator, 4-spindle winder, air shaft, water chiller

Water Cooling Type Plastic Film Recycling Machine (GSR-100)

Categories : Recycling Lines by Application

The GSR-100 is the 100 mm size in JANDI'S GSR water cooling type plastic film recycling series for HD, LD and LLDPE and P.P. scrap. A spiral feeder delivers film into the 100 mm extruder, which is driven by a 60 HP motor; the melt passes a screen changer driven by an A.C. motor with reducer and leaves through a spaghetti type die head into a stainless steel water tank, where the strands are cooled before being blown dry and pelletized by a rotary cutter with fixed blade. Maximum capacity is 190KG/ HR. The GSR-100 sits between the GSR-85 and GSR-120 in a series of six sizes, from the GSR-45 with a 45 mm extruder and 15 HP motor to the GSR-150 with a 150 mm extruder and 100 HP motor. Control is from an independent switch board. The option list is shared across the series: conveyor with metal detector, crusher, screw conveyor, vacuum pump, pressure gauge, hydraulic screen changer, second extruder, vibrating screen, and air blower with storage tank. Type: water cooling (spaghetti type) plastic film recycling machine Material: HD/LD/LLDPE & P.P. Extruder: 100 mm; driving motor 60 HP Max. capacity: 190KG/ HR Feeding: spiral feeder; screen changer driven by A.C. motor with reducer; spaghetti type die head Stainless steel water tank and blower; rotary cutter with fixed blade Series: GSR-45 (45 mm, 15 HP) to GSR-150 (150 mm, 100 HP); options: conveyor with metal detector, crusher, hydraulic screen changer, 2nd extruder, vibrating screen

Shredder Integrated Recycling Machine

Categories : Crushing, Shredding & Granulating Equipment

Can handle large heavy materials or thin-film materials, such as lump from screen changer, roll material, bulk barrel, containers..., Two-stages filtration makes raw materials cleaner, fully automatic, and reduces the labor operating time. Operate easily. Accept customize., One machine with multiple functions.Solving complicated production, and the adjustment process is fast-High productivity, low noise, Easy operation, Blades removal is easy and reusable

Water Cooling Type Plastic Film Recycling Machine (GSR-85)

Categories : Recycling Lines by Application

The GSR-85 is a water cooling type plastic film recycling machine for HD, LD and LLDPE and P.P. scrap. Film is fed by a spiral feeder into an 85 mm extruder driven by a 40 HP motor, passes a screen changer driven by an A.C. motor with reducer, and is extruded through a spaghetti type die head into a stainless steel water tank. The cooled strands are blown dry and cut by a pull and cutting unit with a rotary cutter and fixed blade, at a maximum capacity of 120 KG/HR. The GSR-85 is the mid-size machine in a series that runs from the GSR-45 to the GSR-150, with extruder sizes from 45 mm to 150 mm and driving motors from 15 HP to 100 HP. All sizes are controlled from an independent switch board. Options include a conveyor with metal detector, crusher, screw conveyor, vacuum pump, pressure gauge, hydraulic screen changer, second extruder, vibrating screen, and an air blower with storage tank. Type: water cooling (spaghetti type) plastic film recycling machine Material: HD/LD/LLDPE & P.P. Extruder: 85 mm; driving motor 40 HP Max. capacity: 120 KG/HR Feeding: spiral feeder; screen changer driven by A.C. motor with reducer; spaghetti type die head Stainless steel water tank and blower; pull and cutting unit with rotary cutter and fixed blade Series: GSR-45 to GSR-150 (45 mm to 150 mm, 15 HP to 100 HP); options: conveyor with metal detector, crusher, hydraulic screen changer, 2nd extruder, vibrating screen