Search - manual screen changer

FILM/BAGS WASTE PLASTIC RECYCLING MACHINE: KCR-65

Categories : Recycling Lines by Application

The KCR-65 is a film/bag waste plastic recycling machine that crushes and reprocesses HDPE, LDPE, and LLDPE film or bags, converting the waste into pellets at an output of 35-50 kgs / hr.A 15 HP crusher and 2 HP spiral-type hopper feeding device convey the material into a single-degasification Ø 65 mm screw with a 24:1 L/D ratio, heated at 13.5 kw across 3 auto thermo zones and driven by an AC 20 hp inverter motor. The melt passes through a spaghetti-type die (3.5 kw heater, 1 zone) with a manual screen changer, then a water-cooling system and a pellet cutter with a 1 HP cutting machine motor and 3 HP cutter motor.Model: KCR-65Suitable material: HDPE/LDPE/LLDPEOutput: 35-50 kgs / hrCrusher: 15 HPScrew diameter: Ø 65 mm, L/D ratio 24:1Heating capacity: 13.5 kw, 3 zoneDriving motor: AC 20 hp + InverterDie type: Spaghetti TypeCooling system: Water Cooling

Die Plate or Adaptor

Categories : Machine-Specific Spare Parts

P.P. Film Inflation Machine (GF-P65)

Categories : Blown Film Extruders

The GF-P65 is a P.P. (polypropylene) tubular film inflation machine, a blown film line adapted for polypropylene, which needs a sizing and cooling arrangement different from polyethylene film. It is one of four sizes in the GF-P series, from the GF-P45 to the GF-P75, and is specified for a maximum film width of 800 mm with a 65 mm extruder driven by a 30 HP motor with inverter, a 350 mm die with a single lip air ring, a 2 HP inverter-controlled blower, 5 PCES of sizing ring and a hot air type drying system. Maximum capacity is 80 kg/hr. Control is from an independent switch board and the roller width is 900 mm. Options include an auto loader, hopper dryer, manual screen changer, pressure gauge, die rotating unit, corona treater, static eliminator, 4-spindle winder, air shaft and water chiller, so the machine can be built up for printed or multi-roll production of PP tubular film. Type: P.P. tubular film inflation machine Material: P.P. (Polypropylene) Max. film width: 800 mm Extruder: 65 mm, 30 HP motor with inverter Die: 350 mm with single lip air ring; blower 2 HP with inverter; sizing ring 5 PCES; hot air type drying system Max. capacity: 80 kg/hr; roller width 900 mm Options: auto loader, hopper dryer, manual screen changer, die rotating unit, corona treater, static eliminator, 4-spindle winder, air shaft, water chiller

Manual Screen Changer

Categories : Separating & Filtration Equipment

HDPE High Speed Inflation Machine (GF-H45)

Categories : Blown Film Extruders

The GF-H45 is a high-speed blown film line for HDPE (high density polyethylene), the material used for thin, crisp bags such as grocery and produce bags. It is one of five sizes in the GF-H series, which spans the GF-H35 to the GF-H65, and is specified for a maximum film width of 600 mm. The extruder carries a 45 mm screw with a 20 HP inverter-controlled motor, and the 70 mm die is matched with a dual-lip air ring and a 3HP inverter-controlled blower. Output is rated at 40 KG/HR. The take-up tower is a fixed type with a 700 mm roller width, and winding is on a single-station manual surface winder controlled from an independent switch board. Options cover an auto loader, manual screen changer, pressure gauge, die rotating unit, LDPE dies and air ring, corona treater, embossing unit, second-station winder and air shaft. Material: HDPE Max. film width: 600 mm Extruder: 45 mm screw, 20 HP motor with inverter Die: 70 mm with dual-lip air ring; blower 3HP with inverter Max. capacity: 40 KG/HR Take-up: tower fixed type, 700 mm roller width; single-station manual surface winder Options: auto loader, manual screen changer, die rotating unit, LDPE dies/air ring, corona treater, embossing unit, 2nd station winder

PVA Water Soluble Blown Film Machine - GF-AV35.45

Categories : Blown Film Extruders

The GF-AV35.45 listing covers JANDI'S PVA water soluble blown film machines in two extruder sizes, which differ in extruder diameter and maximum film width. Both process PVA based water soluble, compostable and biodegradable compounds into tubular film for water soluble bags and packaging. Each machine is supplied with an extruder, a blown film die, an air ring, a take-up tower and a winder. Options are an auto loader, manual screen changer, pressure gauge, die rotating unit, corona treater, flying knife, second station winder, air shaft and air chiller. The showroom specification table lists the film width and extruder size of each model; details are available with quotation and specifications can be changed on request. Type: PVA water soluble blown film machine, GF-AV35.45 listing Models: two extruder sizes, listed in the specification table Material: PVA based water soluble, compostable and biodegradable compounds Extruder, blown film die, air ring, take-up tower and winder Options: auto loader, manual screen changer, pressure gauge, die rotating unit Options: corona treater, flying knife, second station winder, air shaft, air chiller Film width and extruder size per model in the specification table

PLA/ PBAT Blown Film Machine

Categories : Blown Film Extruders

The PLA/PBAT Blown Film Machine (GF-LB Series) is a blown film line configured for compostable and biodegradable resins based on PLA and PBAT. It produces tubular film from these compounds for downstream bag making, in the same way that JANDI'S GF-L series does for conventional polyethylene, and is listed in the showroom specification table as the GF-LB Series with film width and extruder size selected per model. The line is built from an extruder, a blown film die, an air ring, a take-up tower and a winder. Options include an auto loader, manual screen changer, pressure gauge, die rotating unit, corona treater, flying knife, second station winder, air shaft and air chiller. Film width, output and configuration are confirmed with the buyer at quotation; the specification table below lists the series range. Type: single-layer blown film machine, GF-LB Series Material: PLA/PBAT based compostable and biodegradable compounds Extruder, blown film die, air ring, take-up tower and winder Options: auto loader, manual screen changer, pressure gauge, die rotating unit Options: corona treater, flying knife, second station winder, air shaft, air chiller Film width and extruder size per model, confirmed at quotation

LD/LLDPE High Speed Inflation Machine (GF-L55)

Categories : Blown Film Extruders

The GF-L55 is a single-layer blown film line for LD and LLDPE (low density and linear low density polyethylene). It sits in the middle of the GF-L series, which runs from the GF-L35 up to the GF-L65, and is configured for producing polyethylene film for bags and packaging at a maximum film width of 1000 mm. The extruder uses a 55 mm screw driven by a 40 HP motor with inverter control, feeding a 200 mm die fitted with a dual-lip air ring. Rated output is 90 KG/HR. The line is controlled from an independent switch board, and film is taken up on a 1100 mm roller width and wound on a single-station manual surface winder. Options include an auto loader, manual screen changer, pressure gauge, die rotating unit, corona treater, HDPE dies and air ring, flying knife, second-station winder, air shaft and air chiller, so the same base machine can be specified for HDPE or for downstream printing. Material: LD/LLDPE Max. film width: 1000 mm Extruder: 55 mm screw, 40 HP motor with inverter Die: 200 mm with dual-lip air ring Max. capacity: 90 KG/HR Roller width: 1100 mm; single-station manual surface winder Options: auto loader, manual screen changer, die rotating unit, corona treater, HDPE dies/air ring, 2nd station winder, air chiller

AUXILIARY EQUIPMENT

Categories :

This range of auxiliary equipment supports plastic film extruders and extrusion lines, covering the take-up, winding, and screen-changing stages of the process.The line-up includes a roller-type bubble guide bracket, a waste collecting winder with a gear box direct-connected to the main motor, a horizontal type winder and semi-auto winders (unit 1 and unit 2), and a choice of manual, horizontal, or pneumatic screen changers, along with a rotating die option.Bubble guide bracket: roller typeWaste collecting winder: gear box direct connect to main motorWinder options: horizontal type winder, semi-auto winder unit (1) and unit (2)Screen changer options: manual screen changer, horizontal screen changer, pneumatic screen changerDie option: rotating die

HIGH-SPEED MONO-LAYER BLOWN FILM MACHINE

Categories : Blown Film Extruders

Advanced screw design and groove feeder to get excellent material mixing, high output, and reliable production quality. Unique die head and air ring to achieve stable bubble and better even thickness film and bag. Provides a good solution for T-shirt bag, shopping bag, agriculture, and many others. Adjustable tower height. FEATURES Raw material be used: HDPE / LDPE / LLDPE / EVA. High efficient machine with low energy consumption but high output. High class gear box with enforced lubrication system and oil cooler. Good mixing performance from screw and barrel. OPTIONAL DEVICES Auto-loader Single-layer dies & air rings A/A Two-layer dies & air rings Rotary die Manual screen changer I.B.C. (Internal Bubble Cooling) OBC Film thickness (gauge) control system.  Corona treaterEmbossing roller Double winder Load cell In-line flexographic printer

HEAVY-DUTY BLOWN FILM MACHINE

Categories : Blown Film Extruders

Film width 2000 ~ 4000mm, for general packing and agricultural Hutch. Heavy duty construction, take up tower. Automatic surface winder with uploading device. Swing type manual screen changer. LDPE / LLDPE Heavy Duty Big Size Blow Film Machine. Screen changer of swing manual type. Extruding die of single spiral channel gives even and smooth flow pressure, Air ring of dual orifice design ensures ultimate cooling. Heavy duty steel structure takes up tower. EPC (Edge Position Controller) Fully automatic big roll type single winder or back to back auto winder.