English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
Servo Motor Driven Zipper Bag Making Machine
Categories : Plastic Bag Making Machines
1. Servo Motor Driven, Efficient mechanical structure 2. User-friendly Control Panel, easy to understand easy to operate. 3. Digital control for production length adjusting, precise and less wastage. 4. Simple design, assemble precisely, durable, and easy for maintaining. 5. Easy operating, Pleasant cutting and sealing, with high firmness and no scratch. 6. Real time printing tracing control for accurate registration, when printing error occurred machine will stop automatically.
Central Safety Filters
Categories : Separating & Filtration Equipment
SCSF series central safety filter in central loading system adopts large dust collector to filter dust and small impurities in material so can effectively protect blower and prolong its service life. Self-cleaning function realize the effective cleaning of the filter by set-up auto timer, which can reduce manual clean times. Equipped with vacuum breaking valve to not only protect the blower, but also accelerate conveying and loading speed.
Tire Recycling System
Categories : Crushing, Shredding & Granulating Equipment
The tire pre-shredding machine can be equipped with bolted cutting tools to minimize the operational cost and simplify maintenance of the line. Two-stage rasper system effectively liberates the steel from the rubber enabling effective separations and the production of clean wire. The fine granulation system is equipped with a special rotor designed specifically for tire rubber size reduction. It provides maximum throughput, whilst minimizing the amount of fines created. The machine is also optimized for low operational and wear costs. Textile and dust is aspirated at several positions of the recycling system. A central Reverse Jet Filtration System extracts dust from the entire system. Our Milling System can be installed at the back end of the tire recycling machine line system. The size and configuration of the Milling System is configured according to the specific production requirements i.e. size and throughput. Advanced sound attenuation enclosures can be provided to reduce the noise level of the system to < 85dBA. Water spray & misting systems are installed on key components to maintain processing temperatures at safe levels and to protect against fire. System automation ensures that components actions are linked, the system capacity is maximized, and the system is protected against interfering material in the best way. (More About "10 Insights into Our Tire Shredding Machines : Shred Smart" ...)
THREE LAYER BLOWN FILM EXTRUDER PLASTIC INFLATION MACHINE : KMTL-E3
Categories : Blown Film Extruders Lines
The KMTL-E3 is a three-layer HDPE/LDPE/LLDPE/mLDPE blown film extrusion line offered in three sizes, with film widths from 900 to 1,800 mm and thickness from 0.02 to 0.20 mm, suited to car film, food packaging, and courier bags.The line comprises the KMTL-40-45-40 E3, KMTL-45-55-45 E3, and KMTL-55-65-55 E3 configurations, with screw diameters of Ø 40-45-40 mm, Ø 45-55-45 mm, and Ø 55-65-55 mm (28:1 L/D ratio), driven by 15-20-15 HP, 20-30-20 HP, and 30-50-30 HP AC motors with inverter. Film output ranges from 110 to 250 kgs/hr across the three sizes.Model line: KMTL-40-45-40 E3 / KMTL-45-55-45 E3 / KMTL-55-65-55 E3Suitable material: HDPE/LDPE/LLDPE/mLDPEFilm thickness: 0.02-0.15 mm / 0.025-0.20 mm / 0.03-0.20 mmFilm width range: 900 mm / 1400 mm / 1800 mmFilm output: 110 kgs/hr / 150 kgs/hr / 250 kgs/hrScrew diameter/type: Ø 40-45-40 mm / Ø 45-55-45 mm / Ø 55-65-55 mm, L/D ratio 28:1Driving motor: AC 15-20-15 HP / 20-30-20 HP / 30-50-30 HP + InverterDie diameter: Ø200 mm / Ø300 mm / Ø500 mmTake-up speed: 65 m/min / 45 m/min / 40 m/min
JIT Shopping Bag Making Line (JIT Series)
Categories : Bag Making Machine by Applications
The JIT Series is JANDI'S in-line shopping bag making line. Blown film extrusion, printing and bag making run as one continuous process, so resin enters at one end and finished, printed shopping bags leave at the other; there are no intermediate film rolls to store, transport or re-load. This listing covers the series as a whole, which is offered in mono-layer semi-automatic and full-automatic types, an ABA full-automatic type and a two-colour full-automatic type. Because the steps are linked, JANDI'S describes the line by what it removes from a conventional three-machine set-up: separate handling between extrusion, printing and bag making, the floor space and storage for film rolls, and the die-cut scrap, which is recovered on-line and fed back. Line composition, printing configuration, bag size and output are configured with the buyer at quotation. Type: in-line shopping bag making line, JIT Series Process: blown film extrusion, printing and bag making in one line Configurations: mono-layer semi-auto, mono-layer full-auto, ABA full-auto, two-colour full-auto Single-side printing configuration, colour count confirmed at quotation Die-cut scrap recovered on-line No intermediate film roll storage between steps Line composition, bag size and output configured at quotation
T-Shirt Bag Making Line (JIT-45D)
Categories : Bag Making Machine by Applications
The JIT-45D is the 2-Color T-shirt Bag Making Line in JANDI'S JIT series. Rather than a stand-alone bag machine, a JIT line links blown film extrusion, printing and bag making into one in-line process, so that resin enters at one end and finished, printed T-shirt bags leave at the other without intermediate film rolls being stored and re-handled. The 45D designation identifies the two-color printing configuration of the line. The JIT series is offered in several configurations — mono-layer semi-automatic and full-automatic types, an ABA full-automatic type and the 2-color full-automatic type represented by the JIT-45D — so the line can be matched to the film structure and print requirement of the bag. Line composition, film width and output are configured with the buyer at quotation, and the specification table below lists the models in the series. Type: T-shirt bag making line, in-line blown film, printing and bag making Configuration: 2-Color full-automatic type Model: JIT-45D Series alternatives: mono-layer semi-auto, mono-layer full-auto, ABA full-auto types Line composition and output configured at quotation
T-Shirt Bag Making Line (JIT-55)
Categories : Bag Making Machine by Applications
The JIT-55 is the mono-layer semi-automatic type in JANDI'S JIT T-shirt bag making line. A JIT line links blown film extrusion, flexographic printing and bag making into one in-line process: resin goes in at one end and printed, heat-cut T-shirt bags come out at the other, without film rolls being stored and re-handled between steps. The line is specified for biodegradable material as well as HDPE resin with filler. The in-line flexographic printer runs water-based and solvent-based inks, a bobbin change unit allows non-stop operation, and a waste recovery unit returns the die-cut scrap to the line. Compared with the two-colour full-automatic type in the same series, the JIT-55 is the semi-automatic configuration; bag size, motor size and roller width are listed in the specification table below. Type: T-shirt bag making line, in-line blown film, printing and bag making Configuration: mono-layer semi-automatic type Model: JIT-55 Material: biodegradable material, HDPE resin, filler In-line flexographic printer for water-based and solvent-based inks Bobbin change unit for non-stop operation Heat-cutting type bag sealing unit Waste recovery unit for on-line reuse of die-cut scrap
GRP-H Single-phase solid state relay with Advanced Diagnostic, up to 120A
Categories : Control Equipment / Systems
The ability to propose customized control solutions allows to rapidly satisfy the most different automation needs. For this purpose, the GRP series provides a wide range of extremely compact SSRs, with a solid basic structure but scalable as current sizes (from 15A to 120A), control type and configuration features. Current range from 15A up to 120A Ultra slim dimension IO-Link communication Digital and proportional (V/mA) command Control mode (ZC/BF/HSC/PA) Linear resistance and Infrared lamps (LWIR/MWIR) heaters control Load voltage 480Vac, 600Vac Opt. Partial heater break alarm (1/8) NFC configuration Din rail mounting
Slitting Machines ULTRA/ UHS
Categories : Slitters and Rewinders
The SLIT-UHS series slitter is ideal for the serious slitting all types of flexible packaging materials as well as label stock & paper. The slitter comes standard with razor cutters and groove roller configuration. A shear cutter system is offered as option for paper and other pressure sensitive materials. The machine uses three AC Vector Drives and has automatic tension on unwind and rewind controlled through easy-to-use PLC & MMI touch screen. The machine features a vacuum roller that keeps the material stable during operation at high speeds 600m/min. Friction rings are used on rewind shafts to ensure the production of quality slit rolls when the film thickness varies.
Single Screw Pelletizing Extruder | CK-HS
Categories : Recycled Plastic Pelletizing Lines
CK-HS series Single Screw Extruder can be applied to wide applications, e.g., masterbatch, compounding, and recycling. The screw rotational speed is second only to our CK-DHS high-throughput series. Possible materials : PP, HDPE, LDPE, PS, ABS, ABS & PC, PC, PA, PET, PBT, etc. Extruder screw : The extruder screw of CYKF’s single screw extruder is customized to satisfy different material formulations. The optimal configuration of screw zones ensures high-efficiency extrusion performance. The strict quality management guarantees good quality and long service life of this critical component. Die : The die material and mold runner must be selected and designed according to the physical properties and characteristics of plastics to avoid occurrences of uneven material flow rate, retention, excessive molding pressure, in-mold temperature increase, decomposition and carbonization or other situations that may damage material properties of plastics.
GRM-H Compact single phase Power Controller up to 120A
Categories : Control Equipment / Systems
The features of GRM-H Series Power Controllers ensure efficient heating management even in the case of complex electrical loads, which require special features, as in the case of infrared lamps or Silicon Carbide heating elements. Compact size from 15A to 120A Load voltage 480V, 600Vac Digital IO-Link communication Configurable control mode Zero Crossing, Burst Firing, Half Single Cycle or Phase Angle Feedback V,I,V2, I2, P, Z Soft start and current limits Logic command Vdc, Analog, PWM or IO-Link Advanced partial load break diagnostics (1/8) Slave control output (Two-phase/Three-phase) Configuration and Diagnostics via smartphone App with NFC technology Calibration and alarm reset commands via Digital Input Overview The ability to propose customized control solutions allows to rapidly satisfy the most different automation needs. For this purpose, the GRP series provides a wide range of extremely compact SSRs, with a solid basic structure but scalable as current sizes (from 15A to 120A), control type and configuration features. Control An accurate process control is the condition to achieve a constant and a high-quality production. To reach this goal it is necessary to manage in the best way the different types of industrial heaters from linear resistances to infrared lamps. For this purpose, the new series of SSR provides a series of control functionalities (ZC/ /BF/HSC/PA/Softstart) fully configurable to adapt to the various needs. Diagnostics Preventing possible anomalies allows to limit or eliminate harmful downtime and production. The GRP series includes dedicated functions such as the HB alarm for partial load breakage with accuracy of 1/8 of the total load, SCR short circuit, overtemperature and power failure. IO-Link communication Factory digitization is reaching its final frontier, the field level of the automation pyramid. In this level IO-Link is confirming itself as the most suitable communication to easily reach devices such as sensors and actuators. From this perspective, the GRP series has been developed to be integrated within this automation architecture. NFC configuration Simple and safe commissioning, maintenance and quick diagnostics are now within the capabilities of devices like SSR. All this thanks to the NFC technology, which allows to extend the user interface using normal Smartphone or Tablet as intelligent configurators. Thanks to an intuitive graphical user interface, setup or diagnostics are particularly easy.
Seaming Machine K3 Plus
Categories : Shrink Sleeve Machinery
K3 Plus is an automatic seaming machine with wide width. Plus series is our new generation seamer. The new design makes the most operator friendly machine available, facilitating training with the most automated machine on the market. Via automatic frictionless lay flat system, no need to adjust the forming section over times. Besides, new generation seamer has 3 independent tension zones that allow forming section for better lay flat control. We believe that the Plus series revolutionize the way shrink sleeves are converted.
2 Colors Rotogravure Printing Machine
Categories : Rotogravure Printing Machines
The GB2060A is Ming Jilee's 2 colors rotogravure printing machine for bag converting applications. It supports 2+0 or 1+1 printing configurations on film up to 600 (L) mm in size, letting converters set up color layout to match the print job.Printing output runs from 10 - 80 M/min, covering a wide speed range for different film substrates and print complexity. The complete unit measures 8,700 (L) x 1,800 (W) x 2,600 (H) mm, sized for placement within a converting line.Model: GB2060AFeed material: 2+0 / 1+1Size: Max. 600 (L) mmOutput: 10 - 80 M/minMachine dimension: 8,700 (L) x 1,800 (W) x 2,600 (H) mm
F-4 ADC seriesRack Mount DC Power Supply
Categories : Electronic, Automation and Safety Components
Utilizing PWM switching technology, the ADC series DC power supply has high power density, short response time, high accuracy and well-around protection. It has been widely adopted in prod production line, burn-in test, laboratories and integrated system. Featuring a straightforward user interface, the ADC Series has advantages of modular design with compact size and light weight. It has three models of 2kW, 4kW and 8kW unit, and can be paralleled up to 64kW with 19 inches cabinet. With flexible configuration design, ADC series can meet needs of various applications with high price-performance ratio.
Proofing Machines FCM-1300
Categories : Slitters and Rewinders
Applications of FCM-1300 Proofing and sampling for engravers & packaging printers Functions of FCM-1300 Check cylinder engraving quality including the accuracy of text, colors and ink standards. Production press simulation for samples with different colors offers variety for customers. Benefits of FCM-1300 One man operation. 10 minute proofing. Reduces ink and material use. Maximizes production press time. Use production inks and materials. Features of FCM-1300 1. Machanical position on printing roller In combination with inductive proximity switch and mechanical headstock can make sure the printing roller will return to exact position before every proofing. 2. High solution cameras and video registration system With a high solution camera and an electronically generated dual cross on the screen which 16 times magnifies the arrow on every cylinder can eliminate parallax error. 3. Adjustable doctor blade device Consists of 2 doctor blade to intense the hardness. Adjustable angles and pressure accommodates variable patterns of the cylinder. 4. Shaft-less air chuck Allows easy and safe loading of a cylinder and wash-off by one operator. It can be suttle adjusted to accommodate different width of the cylinder. 5. Adjustable cylinder deck Easy and safe operation for loading the cylinder by pneumatically adjusting the deck upward and downward. 6. Superduper printing roller (1)Smooth, rustproof, and heavy-duty printing roller through chromium-electroplated and grinding process. (2)Bouncy compressible blanket, closely dovetailed with printing roller, can easily be replaced when it is blot and spoiled. (3)The proofing length is up to 2500mm. Depending on the size of cylinders, it can print at least 2 copies of samples in every proofing. 7. Powerful vector motor The printing roller is driven by an powerful 7.5 HP vector motor. 8. Adjustable proofing speed Accommodating different material and ink quality, the proofing speed can be adjusted from 20 to 90 m/min. 9. Linear guide way All of the sliders applied to air chuck and cylinder adopt linear guide ways. With height position exactitude, the device will not facilely glide on linear movement.
Dynisco UPR900 – Process Indicator
Categories : Dosing, Measuring & Mixing Equipment
Display pressure, temperature, or even differential pressure • Optional second input/output for cost-effective single instrument • Analog retransmission of process variable allows signal to be sent to other devices • USB port option for access to configuration and log files • Modbus RS-485 and Modbus TCP Ethernet supported UPR900 Enhancements • Data logging option logs process values, set points and alarms to .csv file for use with spreadsheets • Easy-to-use Setup Wizard Graphical/text LCD display with color change LED backlight on alarm (red/green) • Graphical trend view of process, alarms and events as standard
Servo Motor Driven Perforating Bag Making Machine with Automatic Rewinding Module - Three Fold
Categories : Bag Making Machine by Applications
1. Servo Motor Driven, Efficient mechanical structure From film to final bag, one process flow. 2. Unique designed Multi-Functional Folding Device can fold three types of bags. 3. Adjustable Multi-Functional Folding Device can fold any size of bag without changing the rack. 4. This can produce Coreless Rolls. 5. User-friendly Control Panel, easy to understand easy to operate. 6. Digital control for production length adjusting, precise and less wastage. 7. Simple design, assemble precisely, durable, and easy for maintaining. 8. Easy operating, Pleasant cutting and sealing, with high firmness and no scratch. 9. Real time printing tracing control for accurate registration, when printing error occurred machine will stop automatically. 10. High production efficiency to save labor and time.
Servo Motor Driven Perforating Bag Making Machine with Automatic Rewinding Module - Four Fold
Categories : Plastic Bag Making Machines
1. Servo Motor Driven, Efficient mechanical structure From film to final bag, one process flow. 2. Unique designed Multi-Functional Folding Device can fold "M" Shape bags. 3. Adjustable Multi-Functional Folding Device can folding any size of bag with out changing the rack. 4. This can produce Coreless Rolls. 5. User-friendly Control Panel, easy to understand easy to operate. 6. Digital control for production length adjusting, precise and less wastage. 7. Simple design, assemble precisely, durable, and easy for maintaining. 8. Easy operating, Pleasant cutting and sealing, with high firmness and no scratch. 9. Real time printing tracing control for accurate registration, when printing error occurred machine will stop automatically. 10. High production efficiency to save man power and time.
Die / Mold Cart System
Categories : Mold Changing Systems
• Fully automated die or mold changing • High precision die or mold placement • Increased safety and efficiency • Can serve multiple production lines at once • Multiple layout configurations
PT46X5 Series
Categories : Sensing, Monitoring & Inspection Equipment
The PT46X5 Series transmitter is a +/- 0.5% sensor ideal for general purpose melt pressure measurements requiring simple installation, repeatability and reliability. The PT46X5 transmitters provide the industry standard 0 – 5 Vdc amplified signal designed to work with DCS and PLCs, 1 – 6 Vdc outputs are also available. The PT46X5 comes equipped with zero and span pots to adapt the transmitter to process conditions. Optional thermocouple or RTD configurations are available to provide melt temperature. The PT46X5 features a 1/2-20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety of electrical connections. The PT46X5 Series includes models PT4605, PT4625, PT4635, TPT4605, TPT4625, and TPT4635.
Fully Automatic Ear- Loop Type FFP2 / KN95 Mask Machine
Categories : Bag Making Machine by Applications
The MGA-MSK-KN95 (CE) is a fully automatic ear-loop type mask machine built for FFP2 and KN95 mask production, forming non-woven fabric layers into a three-dimensional mask body, welding the layers, attaching a nose bridge piece, and adding ear loops in a single automated production sequence. The machine runs a fixed mask size compatible with FFP2 / KN95 mask specifications.Output reaches 40 - 50 pcs/min from a footprint of 9,200 (L) x 2,200 (W) x 1,800 (H) mm. Optional equipment extends the base configuration with an inkjet printer, a nose foam labeling system, and an upgrade to a Herrmann ultraschall ultrasonic system made in Germany.Model: MGA-MSK-KN95 (CE)Mask size: fixed size, compatible to FFP2 / KN95 maskOutput: 40 - 50 pcs/minMachine dimension: 9,200 (L) x 2,200 (W) x 1,800 (H) mmMachine weight: 2,500 kgOptional: Inkjet printer (European brand)Optional: Nose foam labeling systemOptional: Upgrade ultrasonic system to Herrmann ultraschall (made in Germany)
DHL Bag Making Machine
Categories : Sealing Machines
1. Servo Motor Driven, Efficient mechanical structure produce 180 bags per minute. 2. User-friendly Control Panel, easy to understand easy to operate. 3. Digital control for production length adjusting, precise and less wastage. 4. Simple design, assemble precisely, durable, and easy for maintaining. 5. Easy operating, Pleasant cutting and sealing, with high firmness and no scratch. 6. Real time printing tracing control for accurate registration, when printing error occurred machine will stop automatically. 7. Universal Welding Device, easy operating and able to produce up to 15 kind of bag. 8. SHSS-T Twin Servo Motor Driven Model can produce two different size of printed plastic bag at same time. • The Conventional mechanical clutch / brake and rack & pinion system is also available.
Loss-In-Weight Feeder
Categories : Dosing, Measuring & Mixing Equipment
Loss-in-weight feeder is a gravimetric metering device that provides continued feeding without cause batch problems. The feeder receives constant feedback from the sensor to ensure the materials are delivered in a precise amount that saves manpower successfully. CYKF provides different types of loss-in-weight feeders, including single screw, twin screw, and the models for feeding liquids. Various sizes and configurations are available to satisfy wide applications. Our team equipped with both profession and experience in the field of plastic extrusion. We provide suggestions and service for equipment integration to help customers save more money and get higher profits.
SPX 4-Series
Categories : Sensing, Monitoring & Inspection Equipment
■ 4-20mA loop-powered output ■ +/- 0.25% accuracy available ■ Wide selection of pressure ranges available ■ Turndown 6:1 ■ Configurations available for use in hazardous locations ■ Remotely configurable via HART ■ Precise, repeatable pressure measurements ■ Output supplied directly to DSC or PLC ■ Meets CE requirements ■ CE ATEX Intrinsically Safe Approved ■ SIL 2 Certified (pressure output) ■ PL'c' Certified (relay output) ■ Additional approvals are available