English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
Filtering System: Back Flush For Extrusion Machine
Categories : Recycled Plastic Pelletizing Lines
Non-stop screen-changer system to keep the production operate while replacing the filter plate. With 4 removable-honeycombed plate to increase the leached area and efficiency. Decrease the consumption cost and the frequency of filter-change to save the labor cost. The special passageway design can drain material off individually, and purge contaminants by the filter. Due to the filtration through specified passageway, this backflush screen change system is purging and expelling the dirty material simultaneously.
In Mould Decoration Film
Categories : In Mold Decoration
The process of molding and ink transfer occur simultaneously. This is a non-spray method which can be applied on curvy product.
Double Side and Outside Lamination Machine
Categories : Industrial Lamination
The lamination machine are used for coating of thin layer of Polyolefin (mainly LDPE/PP) on substrates like woven fabric, BOPP film, paper, jumbo bag (FIBC) etc, which is for moisture-proof, dust-proof, and structurally strong enough.
Insert Molding Film
Categories : In Mold Decoration
Preform the INS sheet and trim the unnecessary parts then insert into mold for molding.
JCHR2(S) Fully Automatic High Speed Bottom Sealed & Vegetable Bag on Roll Making Machine/JCHR2(S) Two Functions Bags On Roll Making Machine
Categories : Plastic Bag Making Machines
FEATURES Pneumatic type of film roll supporter. Synchronous sealing & perforation. Perforation for both upper & bottom side open, no need to change perforation blade. Twin servo motors, twin photo cells. Digital control tension-less feeding out roller. 2 lines operation for producing different length, thickness and different bags volume on roll separately. Fully automatic roll change device. Suitable for any materials of plastic bag. It can produce any types of bag you provided. Capacity : for bag length under 500mm , 600 bags per minute, line speed : 125m per minute. Vegetable bag making machine Computer control over the entire process From film roll to final bag, one process flow Servo motor, as standard attachment, makes it easy to adjust the bag length and the production speed Automatic film feeding, coordination free from tension adjustment Automatically stop when running out of film Automatically stop when film feeding blocks or bags jam Automatically stop when color scanning misses High production bag on roll making machine efficiency to save manpower and time. Antomcatically bag on roll making machine core changing
6 Shuttles Circular Loom
Categories : Industrial Knitting Machines
FD-6B/850 (S) are applied for weaving into tubular fabric from flat yarn spindles. It is suitable to produce variety of fabric sizs for packaging application like fertilizer, animal feed, seed, chemical, cement etc.
ABS - Metal-Plating Purpose
Categories : ABS Resin
Metal-plating purpose ABS (ISOPAK 547M), supplied in 25 kg packages. Main applications include acoustic outer coverings and cosmetics boxes.
Overload Protector
Categories : Quick Mold Change and Clamping Systems
FUNCTION Overload Protector is equipped in Press machine to check hydraulic pressure of cylinder inside the slider. If happen overload, the hydraulic pressure of cylinder will be released immediately within 3/1000 seconds. When happen overload, in order to protect the press and die, the press will stop working immediately after receiving the signal from limit switch. After happen overload, the air will drive hydraulic pump to supply normal working pressure immediately and the press can work normal. It has pressure control valve inside of overload protector, which can adjust hydraulic pressure automatically and eliminate the impact of rising pressure (which cause by oil temperature rise) in pressing process. May select different types of components and control units base on the different types and specifications of press machines.
Quick Mold Change System
Categories : Mold Changing Systems
It is an era for making high frequency mold change with multiple patterns and small quantity. In order to save time for the mold change and ensure the safety of the operation, it is just in time to apply Quick Mold Change System. SAFETY FUNCTION OF SYSTEM Each hydraulic circuit has the function of check and avoiding oil leaking. This system can add pressure automatically when the pressure reduction. Each hydraulic circuit has the function of inspection pressure and can be interlocked with the machine. It adopts the intersecting direction to clamp the mold. There are several functions to avoid operation error.
Flexographic Printing Machine
Categories : Flexographic Printing Machines
The flexo printing machine is suitable for roll to roll printing material such as HDPE, LDPE, paper, and non-woven fabric.
Pump
Categories : Pumps & Hydraulic Units
FUNCTION Use air to drive hydraulic pump. Once the outlet hydraulic pressure reaches the setting pressure, it will stop driving and won't waste any energy. If the outlet pressure is reducing, it will supplement pressure automatically to maintain the pressure continuously. The outlet pressure of the pump and the pneumatic pressure of driving are as direct ratio. The outlet pressure will base on the adjustment of pneumatic pressure to change. The hydraulic pressure (available hydraulic pressure from 60 – 500 Kgf/㎝²) ， flow rate of pump and circuit control system will base on the requirement to be different. The circuit control system has the function of check. If there is no pneumatic pressure, the hydraulic pressure will be maintained. The best application is for work clamping systems or hydraulic pressure supply system which needs to maintain pressure for a long time but less operate. It has the function of inspection pressure and can be interlocked with the machine.
Reactive Hot Melt Polyurethane Adhesive(PUR) for Electrical Device
Categories : Industrial Adhesives
GRECO's reactive hot melt polyurethane (PUR) adhesive for electrical devices is non-VOC. It provides greater initial and final strength than general hot melt adhesive and is used in electrical equipment, furniture, architecture, textile and automotive applications.