English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
Rotary Table Low Pressure Molding Machine
Categories : Horizontal Injection Molding Machines
Low pressure molding production is a process uses hot liquidify Polyamide material. Wire harnesses, connectors, sensors, micro switches, etc. These Automotive Electronics need to be waterproof and durable. rapid production, environmental protection, reduce the defect rates and better outlook design, the application of low-pressure injection machines in this automotive industry has gradually increased.
PET Preform Injection Molding Machine Servo - 120PET to Servo 470PET
Categories : Horizontal Injection Molding Machines
Standard L/D ratio of 24 times and above for good plasticizing quality. Application of barrier type screw features and an extra barrier ridge to ensure homogenous plasticization when melting PET. Because of the viscosity of the PET, the screw speed and capacity of the hydraulic motor is upgraded to achieve higher plasticization. Compatible with auxiliaries such as PET preform molds, material dryer, mold sweat dehumidifier, water chiller, conveyor and post-cooling automation. Optional features such as a shut-off nozzle or an ejector on the fly are available. These are for shortening the total cycle time and maximizing the output.
ATOL- Horizontal Multi-color/resin Injection Molding Machine
● Single, dual, triple color/resin in one machine. ● Suits for Plunger type injection or screw type injection system. ● 2-platen 4-cylinder direct clamping system. ● Patented central-radial platen durable for 30 years. ● Intelligent program controller makes injection easier. ● The shortest injection molding machine. ● Precise energy-saving hydraulic system.
YR Multiple Embedded Rotary Injection Molding Machine Series
Categories : Vertical Injection Molding Machines
Vertical clamping with vertical injection. Rotary table oscillate 180 °, rotate back / forth for easy loading and finished parts pick out, to increase productivity. Rotary table with location pin, accurate positioning for mold alignment and automation. Robot interface capability for complete automation. Standardized wtih 2-sation function, and capable for 3-station or 4-station function & automation linkup for advanced efficiency. Standardized wtih 3-column clamp, and available for 4-column clamp upon request.
Hydraulic Clamping Injection Molding Machine DHT Series
Categories : Hydraulic Clamping Injection Molding Machines
Direct hydraulic clamping injection molding machines are designed without toggle mechanisms that enable to avoid the toggle wear. This model can increase the position accuracy and is good for high technology and high precision plastic products.
YD Vertical Four-Column/Two-Color Rotary Table-Vertical Clamping and Vertical Injection Molding Machines
Categories : Vertical Injection Molding Machines
A. Standard double injection Vertical 4-columns direct-pressure clamping. In the upper mold plate, two separate vertical injection units is installed(separate injection hydraulic oil route) with the addition of round disc for this double injection machine. - Clamping force is 90- 500TON. Computerized and exclusively configured hydraulic system is used, which is more suitable for the production of general products( or special double-material) injection molding. - Two molds are installed on the upper mold plate while three lower molds are installed on the disc. When molding, the disc rotates alternatively at 120°to complete the two-color (two-material) injection molding or overmolding. - Highly efficient disc with water jacket device in the middle for cooling of the lower mold. - Expandable computer programs and special multistation disc (i.e. two upper molds and four lower molds). In the two lower modes, automated embedding and removing devices can be installed optionally to achieve automation of the whole machine work and increase production efficiency. B. Other double injection machine: - Type 1: A set of independent vertical “injection units” is added onto the upper mold plate of the original injection machine to form a double injection machine. Example: YH / YR / YC models + vertical injection. - Type 2: On the original injection machine, one or more sets of independent horizontal (level) injection units is combined to form a double injection machine. - Example: YH / YR models + horizontal injection - Type 3: The two-colors injection molding machine is combined to form a double injection machine by sharing a common disc. - Example: a. YH model + YT model + disc (2 ~ 4 stations) b. YH model + YH model + disc (2 ~ 4 stations)
Double injection molding machine – HDC series
Categories : Injection Molding Machines by Platen
The standard HDC series has two parallel horizontal injection unit to be able to produce a 2-color and 2 plastic material in a time to save time and increase the productivity. To equip Huarong’s patended rotary table, when the table turns, it is accurate on positioning and tilt-free, which Huarong promises the rotary table won’t fall down.
C-Frame Rubber Injection Molding Machine JD-RC series
Categories : Rubber Injection Molding Machines
This c-frame rubber injection molding machineis suitable for natural rubber, synthetic rubber, oil resistant, heat resistant rubber and recycled rubber.
MICRO MOLDING
Categories : Injection Molds
Micro molding is a very specialized art form, which is a kind of tooling design , manufactures small and precision plastic components with polymer-based functional devices, by increasingly demanded in the fields of life science, electronics, medical, photonics, automotive, and aerospace. The tiny-scale molding form of injection molding that entails building a cavity to match the shape of the part you want to make, sort of like the plastic molding that makes Lego bricks. THERE ARE THREE DIFFERENT THINGS TO KEEP IN MIND WITH MICRO MOLDING : Micro means the size of the part. It is the most common definition when dealing with micro molding. Micro features relates to tiny parts on a larger part. As a whole, the part can be big, but its components can be smaller, or micro features. Micro tolerance is how the parts are measured and how close to the needed measurement the part has to be to be considered a good or usable part. When a part is molded, it has to measure within the needed measurement (the tolerance), which could be as small as a thousandth of an inch. Small parts that are simple to make have tolerances that are not as tight and would be considered regular molding. SOME ADVANTAGES OF DESIGN GUIDE IN YOMURA AS : Dimension Aspect ratios around 6:1 (material dependent) Wall thickness : 0.3 mm ( 0.012”) min. for plastic Hole dimension : 0.2mm ( 0.008”) – 0.5mm ( 0.02”) min. Pitch of hole : 0.3 mm ( 0.012”) – 0.50 mm ( 0.02”) min. Tolerance (min) : 0.01 mm ( 0.0004”) – 0.02 mm ( 0.0008”).
Hot Runner System - Valve Gate- VG Type
Categories : Runner Systems
● Good & smooth gate vestige part surface but bad color change ability. ● Used for vehicles such as bumpers, car doors, car light moldings, food containers and products that require multi-shot injection molding and injection timers and is capable of controlled weld condition lines.
Atos- Horizontal Parting Line Plunger Type Injection Molding Machine
Categories : Horizontal Injection Molding Machines
● Without the sprue, it saves a lot runner resin weight. ● Produce precise micro injection products. ● Products with multi cavities can be highly concentrated to the center. ● 2-platen 4-cylinder direct clamping system. ● Patented central-radial platen durable for 30 years. ● Intelligent program controller makes injection easier. ● The shortest injection molding machine ● Precise energy-saving hydraulic system.
Plastic Machine Control System
Categories : Control Equipment
In the field of injection molding machine in China, the sales volume of...
