English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
Stepper-Controlled Proportional Valve 0-400L/min
Categories : Separators
Product Serial: FC-300+PM-300 Proportional Flow Control Valve consists of PM series driver and FC series proportional flow valve. With an input signal either through analogue or digital, the needle inside the proportional valve moves proportionally to the signal. This series is able to control the flow rate of air and liquid with high resolution, high accuracy, and high repeatability. It is developed for industries that require a high degree of adjustment in flow rate. Series PM driver provides series FC valve with the required power and control signal (step and direction). It controls the step of a bipolar stepper motor with an analogue signal (0-10 VDC/4-20mA/RS485 Modbus).
SPX 4-Series
Categories : Indicators and Sensors
■ 4-20mA loop-powered output ■ +/- 0.25% accuracy available ■ Wide selection of pressure ranges available ■ Turndown 6:1 ■ Configurations available for use in hazardous locations ■ Remotely configurable via HART ■ Precise, repeatable pressure measurements ■ Output supplied directly to DSC or PLC ■ Meets CE requirements ■ CE ATEX Intrinsically Safe Approved ■ SIL 2 Certified (pressure output) ■ PL'c' Certified (relay output) ■ Additional approvals are available
Oil Heaters STM
Categories : Control Equipment
STM series oil heaters have both the standard and high temperature models, which are used to heat up the mould and maintain temperature, although they can be used in other similar applications. High temperature oil from the mould is returned to the cooling tank and cooled by indirect cooling. It is then pressurised by the high-pressure pump, sent to the heating tank and finally to the mould with a constant temperature. With our optimised design, It can reach a maximum of 200℃ and the HANYOUNG temperature controller can maintain an accuracy of ±1℃.
Sun Roof Related Parts
Categories : Industrial Parts & Safety Gear
This product is a sunroof front pillar, specifically designed for automotive sunroof systems to provide structural support and fixation, ensuring stable sunroof operation and maintaining vehicle rigidity. It is manufactured using high-strength PP+GF (Glass Fiber Reinforced Polypropylene) material, offering lightweight properties, impact resistance, heat resistance, and low deformation rate, effectively enhancing vehicle safety and durability. Produced with a 1600-ton large injection molding machine, this product guarantees high precision, consistency, and durability, making it suitable for various sunroof systems, including panoramic sunroofs, electric sunroofs, and manual sunroofs. Additionally, its design features excellent drainage performance, efficiently preventing water accumulation, leakage, and flooding issues, ensuring long-term stable operation.
3-Folded T-shirt Style Garbage Bag Making Machine & Folding Machine
Categories : Plastic Bag Making Machines
1. Main convert servo motor controls, Germany SICK electric photo sensor tracking, make sure the feeding accurate and smooth. 2. Bag Cutting and Punching bags' vest simultaneously and neatly. There is no extra incisions between the bottom seal and the bottom line of the bag. 3. Adjust the count setting depends on the need, the machine can fold more than one bag once. 4. Fold's time is adjustable according to the bag making requirement, machine can automatically accomplish 2-time fold, 3-time fold, 4-time fold or 5-time fold. 5. The first and second fold of bag controlled by the servo control, the timing and speed are more accurately controlled. There is no more appears bag drop due to the wrong bag grabbing timing.
Doctoring Rewinder Machines INSPECT-J (11 / 13 Plus)
Categories : Shrink Sleeve Machinery
This high-speed doctoring rewinder machine is designed to unwind and rewind rolls to find any defects on shrink sleeve labels. It is equipped with edge guides for better winding of shrink sleeve labels. It is possible to adjust the amount of oscillation and the type (sine or square) via HMI. It also offers splice, flag or bubble detection options to ensure labels in great quality before application.
APV Electronic Pinch Valve
Categories : Separators
Product Serial: APV APV Series Miniature Pinch Valve is a solenoid operated device that is designed to open and close tubes for controlling flow of liquids and gases. Other valve types have internal passages that may cause small amounts of fluid to remain in the valve. Pinch valves have no areas or dead volume where fluid can become trapped. Only the inside of the tubing contacts the fluid. Energizing the solenoid retracts or attracts the plunger, which opens or closes the tube. De-energizing the solenoid will allow the plunger to return to its original state. Common industries that use pinch valves for the benefits of isolating fluid from a mechanical valve include: drug dispensing, laboratory equipment, waste water, medical devices, chemical, food and beverage equipment, ceramic/glass/plastic, and bulk and solids handling.
High Speed Zipper Bag Making Machine
Categories : Plastic Bag Making Machines
● Model：TS-400 ● Max Cutting Width：320mm max ● Max Cutting Length：350mm max ● Film Thickness：0.04~0.2 mm
High Pressure Liquid Injector-PSX
The PSX high-pressure liquid injector was developed by Sino-Alloy Machinery as an important accessory to their extruder line. The PSX high-pressure liquid injector is made up of a storage tank, proprietary precision plunger pump, and one-way valve type fluid injector. It can generate pressures as high as 50 kg/cm. This feeder can be connected to any feeding port of the extruder. The PSX high-pressure liquid injector is also capable of injecting high pressure gases or super-fluid liquids. Not only is it suitable for the injection of liquid and gaseous additives in rubber or plastics materials, but also for may plastic and rubber reactive processes or the injection of liquid ingredients in food and pharmaceutical. The PSX high-pressure liquid injector can also be supplied with heating and insulation devices, loss-in-weight metering devices, or flow controllers for precise measurements of the input quantity.
High Speed Loop Handle Bag Maker With Continuous Sealers LY-800HLC
Categories : Plastic Bag Making Machines
LY-800HLC is a ultra high-speed, specialized soft-loop bag making machine. It equipped with 5 sets of servo motors to show its outstanding performance. The unique continuous sealer provides highly efficient and good quality of top sealing. The human-machine interface is standard part for easy and friendly operation.
Seaming Machine-K2
Categories : Shrink Sleeve Machinery
The seaming machine K2 model is one of our most popular machines, with over 400 units in operation worldwide. This machine is capable of running at speeds of 300 meters per minute, efficiently forming sleeves through its adjustable forming section. Available in 300mm and 400mm lay-flat models, it offers versatility and precision for a variety of applications in the packaging industry.