Search

Side Sealing Bag Making Machine(GF-S/SV Series)

Categories : Cutting Machines

The GF-S/SV series is JANDI'S range of servo-driven side sealing bag making machines, covering four cutting widths so that a converter can match the machine to its bag sizes. The GF-24SE/SV pairs with the GF-S600/SV at 600 mm cutting width, followed by the GF-32SE/SV and GF-S800/SV at 800 mm, the GF-40SE/SV and GF-S1000/SV at 1000 mm, and the GF-50SE/SV and GF-S1200/SV at 1200 mm. Cutting length is 800 mm across the series, on film from 0.01 - 0.1 mm.SE models run at Max. 200 Cycles/Min and S models at Max. 150 Cycles/Min. Every machine in the series carries a rear feeder with gusset, fold, slitter and adhesive tape applicator, HMI control, a YASKAWA/JAPAN servo drive, a SICK/GERMANY printing scanner, a conveying belt and a collecting table. Optional equipment includes tension control, EPC, a triangle folding device, punch hole and Mexican hat punch devices, ultrasonic sealing, a perforating sealing knife, an envelope punching mold and an automatic stacking table.Type: side sealing bag making machine series, servo driveCutting widths: 600 mm (GF-24SE/SV, GF-S600/SV), 800 mm (GF-32SE/SV, GF-S800/SV), 1000 mm (GF-40SE/SV, GF-S1000/SV), 1200 mm (GF-50SE/SV, GF-S1200/SV)Cutting length: 800 mm; film thickness 0.01 - 0.1 mmProduction: SE model Max. 200 Cycles/Min; S model Max. 150 Cycles/MinStandard: rear feeder with gusset / fold / slitter / adhesive tape applicator, HMI, servo YASKAWA/JAPAN, printing scanner SICK/GERMANY, conveying belt, collecting tableOptions: tension control, EPC, triangle folding, punch hole, Mexican hat punch, ultrasonic sealing, perforating knife, envelope punching mold, automatic stacking table

Automatic Tube Foiling & Capping Machine FCM 120-02

Categories : Capping Machines

1.This machine supports dual functions that can operate simultaneously or independently (Foiling + capping). 2. Equipped with intelligent Al inspection: tubes without orifice or with orifice defects wil not undergo Foiling. 3.Intelligent Al inspection ensures that tubes without foiling or with foiling defects wil not proceed to capping. 4. The capping torque value can be directly set on the HMI (Human-Machine Interface). 5. Products with orifice defects, foiling defects, or incorrect capping torque wil be automatically rejected through the defective product outlet. 6. This machine can also be equipped with a positioning photoelectric sensor to enable snap-on type operation.

Co-extrusion Coating & Laminating Machine (WCL Series)

Categories : Extrusion Coating Machines

In this fast changing packaging market the multi-layer laminates demand has increased. The Co-extrusion machine allows to use two kinds resin or more by two or more extrusion units to create multi-function extrusion layers. The variety of resin after melted and go through the feed block then join into the T-die. The side screw has corrosion resistance treatment. It’s fine to work with acid copolymer resin, such as EVA, EAA, EMAA and Surlyn etc. The barrel heated by ceramic heater to ensure more energy saving and short start up time. Worldly also developed the exclusive extrusion output control system with Germany leading dosing system company. So it provides very accuracy and stable output and coating gauge control during the production. It can save more material especially for long run job. The high speed H series version of the rewinding splicer adopted with tracking roller device. It provides two kinds gap & contact winding mode and gives uniform and perfectly straight finished winding during high speed running. Also the taper tension can proper control the winding from the beginning roll. So it can reduce the wastage and avoid the wrinkle generate at the inner roll.

3 Layer Rubber Sheet Cooling

Categories : Rubber Cooling Machines

This machine is designed to cooling rubber sheet from mixing mill or sheet preforming machine

PET Injection Mold

Categories : Injection Molds

PET Injection Mold ● Molds are designed for high performance using alloy steels and stainless steels, which guarantee maximum precision, high stability, and long life.

Energy-saving Intelligent Drying Control System SEC-H

Categories : Control Equipment / Systems

Hopper Dryer (HD/IHD/DHD)

Categories : Dryers and Dehumidifiers

‧ HD Series Rapid heating. Constant temperature control. ‧ IHD Series Special insulated design. Energy saving. Save against burns. ‧ DHD Series Insulated design. Dust-free, clean free. The standard DHD model is equipped with timer(T), EGO overheat protector(P),and patented magnetic stand (NSD)

Laboratory Intensive Mixer

Categories : Dispersion Kneaders

The 1.8L Laboratory Intensive Mixer is designed for material research and develpment applications in the laboratory.  The heating chamber (mixing chamber) and rotorsave built with water circulation sleeves assuring excellent cooling affect and heat transfer efficiency. 

FILM/BAGS WASTE PLASTIC RECYCLING MACHINE : KCR-150

Categories : Recycling Lines by Application

The KCR-150 is a film/bag waste plastic recycling machine for HDPE, LDPE, and LLDPE film or bags, crushing and reprocessing the waste into pellets at an output of 300-400 kgs / hr.Waste is crushed by a 50 HP crusher, moved via a 2 HP screw conveyor into a 5" feed size, then collected in a 1400 L waste tank before entering a single-degasification Ø 150 mm screw (L/D ratio 30:1) heated at 141 kw across 8 zones and driven by an AC 125 hp inverter motor. The melt is extruded through a circular-shape die with a hydraulic-cylinder screen changer, cooled by a water-cooling system with a 2 HP pump, dehydrated by a 5 HP motor, and pelletized by a 2 pcs (spring) pelletizer.Model: KCR-150Suitable material: HDPE/LDPE/LLDPEOutput: 300-400 kgs / hrCrusher: 50 HPScrew diameter: Ø 150 mm, L/D ratio 30:1Heating capacity: 141 kw, 8 zoneDriving motor: AC 125 hp + InverterDie type: Circular Shape Extrusion DieWaste collecting tank: 1400 L

PP, ABS, PE PLASTIC WASTE RECYCLING EXTRUSION MACHINE

Categories : Recycling Lines by Application

ABS/PP/PE Waste Plastic Recycling Making Machine

Refuse Derived Fuel, RDF-5 Production Plant

Categories : Mixers and Blenders

RDF-5 is to use the wastes, such as urban waste, industrial waste, agricultural waste etc., to go through the technical procedure including shredding, sorting, mixing, and drying to develop the technique of homogeneous fuel producing. It is the homogenzied, high heating value and easy to pack and to transport.

Rectangular Box-2-partition

Categories : Rigid Packaging & Containers

Product Number: EG-962 Color: Natural Material: Fiber Shape: Rectangular