Classification : Swing Arm Robots
Country: Taiwan
Phone: 0425654888
Fax: 886-4-25607888
Contact Person: Ivan
HC-T525P / 50-180 Ton
- If trouble occurs, the operator is alerted by an alarm sounding and the trouble is displayed on the control panel.
- The arm can be quickly swiveled to 90° forward and backward.
- The lubrication - free air circuit eliminates problems caused by lack of lubrication and avoids oil contamination on the product.
- Centralized speed control for convenience.
- Adjustable arm position increases vertical stroke.
- The air operated gripper eliminates electrical short circuit problems. Sprue dimensions from 1 to 10 mm can be positively sensed.
- The vertical guide rod is manufactured from SUJ2 bearing steel with hardness up to 60° hard chrome treated to be low friction coefficient and lubrication free.
》HC-T625P / 180-250 Ton
- The arm can be quickly swiveled to 90° forward and backward.
- The lubrication - free air circuit eliminates problems caused by lack of lubrication and avoids oil contamination on the product.
- Centralized speed control for convenience.
- Adjustable arm position increases vertical stroke.
- The air operated gripper eliminates electrical short circuit problems. Sprue dimensions from 1 to 10 mm can be positively sensed.
- The vertical guide rod is manufactured from SUJ2 bearing steel with hardness up to 60° hard chrome treated for low friction coefficient and lubrication free.
Model | HC-T525P | HC-T625P |
Suited for injection molding machine | 50-180 Tons | 180-250 Tons |
Power source | 220V±10%, 50/60HZ | |
Max Electric consumption | 2A | |
Air pressure | 5kg/cm2 | |
Drive system | Air cylinder | |
Take-out stroke (mm) | 550 | 650 |
Longitudinal stroke (mm) | 100 | |
Posture | 70°~90° | |
Fastest cycle time | 3.0sec. | 3.2sec. |
Fastest extract time | 0.7sec. | 0.8sec. |
Max grip weight(Jig weight included) | 1000g | |
Air consumption ℓ/min(ANR)( Pressure 0.5MPa ) | 12.7 | 14.4 |